Avantco SL310 Handleiding
Avantco
Snijmachine
SL310
Lees hieronder de 📖 handleiding in het Nederlandse voor Avantco SL310 (15 pagina's) in de categorie Snijmachine. Deze handleiding was nuttig voor 48 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/15
1 www.AvantcoEquipment.com
Models: SL309, SL310, SL312, SL512, SL713
09/2022
2 www.AvantcoEquipment.com
Unpack the product and check for any damage incurred during transit. This should be reported to the responsible
carrier, railway or postal authority, and a request for a damage report should be made.
The Avantco Auto/Manual slicer is a medium duty electrically driven appliance. The unit has been designed to meet the
highest safety and hygiene standards. The robust aluminum construction and powerful drive motors ensure long and
reliable operation and use.
1. Place the unit in the desired location with the on/off switch facing the operator. DO NOT plug the unit in at this point.
The supporting table should be stable and at the correct working height. The work surface should be in a dry location
and preferably away from heavy trafc areas.
2. Clean the unit with a DAMP cloth using a neutral P.H. dish detergent. Wipe and dry the machine. (See Cleaning in-
structions on page 3 of this manual.
3. Set the thickness of slice required using the control knob adjacent to the on/off switch.
4. The meat support platform should be in the start position that is close to the operator. Lift up the food pusher; place
the meat to be sliced on the support platform against the raw edge. Return the food pusher to its original position
now on top of the meat to be sliced.
5. Switch on the motor, and using the handle on the food pusher, push the carriage back and forth to begin cutting the food.
6. After you are nished cutting, turn off machine and collect the product slices in the exit area.
7. Please Note: The blade-sharpening device is NOT factory tted on MODELS SL310, SL312 SL512 AND SL713MAN. To t,
follow the procedure below.
a) Fit the sharpening device in the socket provided, ensuring the grinding stones are positioned at the rear of the machine.
b) Tighten the safety locking screw.
To replace the belt, please remove the knife and motor, then remove belt through the hole under the knife. Then, install the
new belt and reassemble.
!
Cut through the greasiest dishes, glassware, cutlery, pots, and pans with Sunbright pot
and pan dishwashing liquid. This heavy-duty pot and pan dishwashing liquid was specially
designed for the institutional environment with its super concentrated, high active, high
sudsing formula. Available in 32 oz. bottles (12/case) or 5 gallon bulk supply.
3 www.AvantcoEquipment.com
1. The units are designed to operate an alternating current (A.C) only. DO NOT CONNECT TO DIRECT CURRENT (D.C).
2. Please ensure that the power supply cord does not come into contact with hot surfaces.
3. If the supply cord is damaged, it must be replaced with a new cord assembly. (Available from the suppliers agent.)
4. The appliance must only be used for its intended purpose.
5. It is strongly suggested that the operators of this machine wear close tting clothes. It is essential when blade
maintenance or cleaning is undertaken that suitable hand protection gloves are used.
6. ALWAYS unplug the slicer before undertaking cleaning or maintenance of the unit.
7. These machines must be operated by trained personnel and should never be used by unskilled operators or children.
8. The blade must be replaced when it has reduced in size by 5mm.
LubriQuik food grade silicone spray lubricant is ideal for use on virtually any equip-
ment or machinery that makes contact with food, such as slicers, conveyor sys-
tems, bottling and canning machinery, bakery equipment, and dairy equipment.
Product specificaties
| Merk: | Avantco |
| Categorie: | Snijmachine |
| Model: | SL310 |
Heb je hulp nodig?
Als je hulp nodig hebt met Avantco SL310 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Snijmachine Avantco
16 November 2024
20 Juni 2023
9 Juni 2023
2 Juni 2023
Handleiding Snijmachine
- Snijmachine Electrolux
- Snijmachine Bosch
- Snijmachine Grundig
- Snijmachine Kenwood
- Snijmachine Krups
- Snijmachine Quigg
- Snijmachine Siemens
- Snijmachine Tefal
- Snijmachine Unold
- Snijmachine Ade
- Snijmachine Ambiano
- Snijmachine Arendo
- Snijmachine Ariete
- Snijmachine Bartscher
- Snijmachine Beem
- Snijmachine Beper
- Snijmachine Berkel
- Snijmachine Bestron
- Snijmachine Bifinet
- Snijmachine Bifinett
- Snijmachine Blaupunkt
- Snijmachine Bomann
- Snijmachine Borner
- Snijmachine Boss
- Snijmachine Brandson
- Snijmachine Brother
- Snijmachine Domo
- Snijmachine Domoclip
- Snijmachine Dremel
- Snijmachine Efbe-schott
- Snijmachine Emga
- Snijmachine Enkho
- Snijmachine Ernesto
- Snijmachine Esperanza
- Snijmachine ETA
- Snijmachine Exquisit
- Snijmachine Fagor
- Snijmachine Ferm
- Snijmachine Festool
- Snijmachine Fritel
- Snijmachine G3 Ferrari
- Snijmachine Gastroback
- Snijmachine Gastronoma
- Snijmachine Genius
- Snijmachine Gorenje
- Snijmachine Gourmetmaxx
- Snijmachine Graef
- Snijmachine Gude
- Snijmachine H.Koenig
- Snijmachine Hendi
- Snijmachine Hikoki
- Snijmachine Hyundai
- Snijmachine Ices
- Snijmachine Kalorik
- Snijmachine Kinzo
- Snijmachine Kogan
- Snijmachine Korona
- Snijmachine Livoo
- Snijmachine Mach
- Snijmachine Magic Chef
- Snijmachine Magimix
- Snijmachine Makita
- Snijmachine Melissa
- Snijmachine Mia
- Snijmachine MPM
- Snijmachine Parkside
- Snijmachine Perel
- Snijmachine Philco
- Snijmachine Powerfix
- Snijmachine Powerplus
- Snijmachine PowerTec Kitchen
- Snijmachine Presto
- Snijmachine Primo
- Snijmachine Princess
- Snijmachine ProfiCook
- Snijmachine Proline
- Snijmachine Ritter
- Snijmachine Rommelsbacher
- Snijmachine Rotel
- Snijmachine Russell Hobbs
- Snijmachine Saro
- Snijmachine Saturn
- Snijmachine Sencor
- Snijmachine Severin
- Snijmachine Silvercrest
- Snijmachine Skil
- Snijmachine Sunbeam
- Snijmachine Swan
- Snijmachine Team
- Snijmachine Thane
- Snijmachine Trebs
- Snijmachine Tristar
- Snijmachine Turmix
- Snijmachine Ufesa
- Snijmachine Venga
- Snijmachine Waves
- Snijmachine Westfalia
- Snijmachine Zelmer
- Snijmachine Jata
- Snijmachine OK
- Snijmachine Oster
- Snijmachine OXO
- Snijmachine Ozito
- Snijmachine Clas Ohlson
- Snijmachine Black And Decker
- Snijmachine Camry
- Snijmachine Clatronic
- Snijmachine Concept
- Snijmachine Cuisinart
- Snijmachine ECG
- Snijmachine Heinner
- Snijmachine Khind
- Snijmachine Orbegozo
- Snijmachine Trisa
- Snijmachine Vox
- Snijmachine Wilfa
- Snijmachine Nutrichef
- Snijmachine Hobart
- Snijmachine Nevir
- Snijmachine Eldom
- Snijmachine GOTIE
- Snijmachine JAC
- Snijmachine Coline
- Snijmachine Rösle
- Snijmachine Sammic
- Snijmachine Tescoma
- Snijmachine Maruyama
- Snijmachine Royal Catering
- Snijmachine RIDGID
- Snijmachine Riviera And Bar
- Snijmachine Ovela
- Snijmachine CaterChef
- Snijmachine Cecotec
- Snijmachine Weston
- Snijmachine RGV
- Snijmachine De Buyer
- Snijmachine Bron-Coucke
- Snijmachine FAC
- Snijmachine Makeblock
- Snijmachine Cigweld
- Snijmachine Globe
- Snijmachine Baker's Mark
- Snijmachine Wolfcraft
- Snijmachine Panduit
- Snijmachine Louis Tellier
- Snijmachine GARDE
- Snijmachine Pro-Cut
- Snijmachine Jokari
- Snijmachine Kleva
- Snijmachine Backyard Pro Butcher Series
- Snijmachine Prince Castle
- Snijmachine Boska
- Snijmachine Prowork
- Snijmachine Backyard Pro
Nieuwste handleidingen voor Snijmachine
30 November 2024
30 November 2024
20 November 2024
20 November 2024
19 November 2024
18 November 2024
18 November 2024
18 November 2024
18 November 2024
18 November 2024