Atdec AWM-HN Handleiding

Atdec Niet gecategoriseerd AWM-HN

Lees hieronder de 📖 handleiding in het Nederlandse voor Atdec AWM-HN (2 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 3 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/2

AWM-HN Page 1 of 2

Installation Guide

AWM-HN

AWM Notebook Tray

COMPONENT CHECKLIST

REQUIRED TOOLS

• 4mm allen key

(supplied with monitor arm)

Notebook

Tray

(x1)

Hook-and-Loop

Fasteners

(x4) 0 - 8 kg

(0 - 18 )lb

WEIGHT RANGE

Device weight should be

within the weight range of

all modular elements that

make up the complete

monitor mounting solution.

IMPORTANT INFORMATION

! Please ensure this product is installed as per these installation instructions.

! This product is compatible with AWM Series monitor arms: AWM-A13, AWM-A46, AWM-A71, AWM-AD

! The manufacturer accepts no responsibility for incorrect installation.

AWM-HN Page 2 of 2

1. Mount Notebook Tray onto arm

2. Mount notebook computer

3. Cable management

4. Adjust Notebook Tray

1.3 Push the lever down

to secure it to the arm

assembly.

1.2 Ensure that the Notebook Tray is seated

fully into the receptacle at the end of the

monitor arm. There should be gap.no

1.1 Insert Notebook Tray into

the monitor arm

Gap No gap

Note: Ensure the lever is

unlocked when tting.

2.1 Adjust the support tabs to

suit the width of the notebook

computer ensuring that cable

ports are not obstructed.

2.2 To increase stability, use the

self adhesive Hook-and-Loop

Fasteners supplied.

a. Peel off the backing paper to

the fasteners.

b. Attach fasteners to both the

Notebook Tray and notebook

computer.

c. Ensure that each set of

fasteners are correctly aligned

i.e. Hook to Loop.

3.1 Cable clips and covers

can be used to further

manage cables.

4.1 Adjust monitor

arm tilt tension using

4mm allen key.

Tighten

Loosen

4.3 Position and align notebook with

other monitors.

4.2 Pan Notebook Tray to desired

position.

Note: After

connecting the

notebook computer

cables, route them

through the cable

management clip

on the back of the

Notebook Tray.

Note: Ensure enough

cable slack is given to

allow for movement.

No portion of this document or any artwork contained herein should be reproduced in any way without

the express written consent of Atdec Pty Ltd. Due to continuing product development, the manufacturer

LIFT

Note: Ensure Notebook

Tray is supported whilst

making tilt adjustments.

+/- 5°

Levelling

Adjustment

Product specificaties

Merk:	Atdec
Categorie:	Niet gecategoriseerd
Model:	AWM-HN
Kleur van het product:	Zwart
Gewicht verpakking:	820 g
Breedte verpakking:	290 mm
Diepte verpakking:	320 mm
Hoogte verpakking:	90 mm
Aantal per verpakking:	1 stuk(s)
(Buitenste) hoofdverpakking hoogte:	450 mm
(Buitenste) hoofdverpakking breedte:	335 mm
(Buitenste) hoofdverpakking brutogewicht:	8600 g
(Buitenste) hoofdverpakking lengte:	595 mm
Hoeveelheid per (buitenste) hoofdverpakking:	10 stuk(s)