Atdec AF-AT Handleiding

Atdec Niet gecategoriseerd AF-AT

Lees hieronder de 📖 handleiding in het Nederlandse voor Atdec AF-AT (4 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 208 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/4

AF-AT Page 1 of 4

COMPONENT CHECKLIST

Monitor

arm

(x1)

Pole Assembly

(x1)

VESA

head

(x1)

Rotation

limitor

(x1)

Screw

M8 x 30mm

(x1)

Pole

top cap

(x1)

Bolt through

base

(x1)

5mm

Allen key

(x1)

Mounting

screws

M4 x 10mm

(x4)

Mounting

screws

M4 x 12mm

(x4)

Mounting

screws

M4 x 16mm

(x4)

Security Screw

M4 x 16mm

(x1)

Steel

washer

(x1)

Cable

stop

(x2)

Cable

clip

(x1)

Primary arm

cable cover

(x1)

Secondary arm

cable cover

(x1)

Desk clamp

assembly

(x1)

Screw

M8 x 60mm

(x1)

Installation Guide

AF-AT

Single Arm

Desktop Monitor Mount

IMPORTANT INFORMATION

! Please ensure this product is installed as per these installation instructions.

! This product is compatible with the range of AF Poles and arms.

! The manufacturer accepts no responsibility for incorrect installation.

REQUIRED TOOLS

WEIGHT RANGE

• Power Drill

• Drill Bit

• Phillips Head Screwdriver

0 - 8kg

(0 - 17.6lbs)

AF-AT Page 2 of 4

1. Desk overview

The desk clamp bracket

can be repositioned to

suit different mounting

surface thicknesses.

1.1 1.2 Default Inverted

2. How to reconfigure desk clamp

2.1 Remove screws

(M8 x 16mm Countersunk screw)

2.2 Remove clamp plate Invert bracket Replace clamp plate Reattach bracket2.3 2.4 2.5

Pressure Plate

M10 Desk Clamp Screw

5mm Allen Key

M8 x 30mm

Countersunk

screw Tighten

firmly

3.2 Place in desired location Screw pressure plates in and .3.3 tighten firmly3.1 Attach clamp to post

Drill 9mm hole in

desired post position

on work surface.

3. Post mount configuration

4. Bolt through

9mm

(3/8”)

25mm

offset

MIN THICKNESS - 0mm (0”)

MAX THICKNESS - 39mm (1.5”)

MIN THICKNESS - 35mm (1.4”)

MAX THICKNESS - 76mm (3”)

5. Installing bolt through

5.1 Attach plate to post

Align rear hole with

hole on desk

5mm

Allen Key

M8x60mm

Screw

Bolt

Through

Plate

AF-AT Page 3 of 4

Arm Assembly

6. Install VESA monitor head

7. Install arm assembly

Handgrip Tab

5mm

Allen Key

Pole

Top Cap

Optional Spacers (may be

required for recessed and

uneven surfaces)

VESA monitor

head

Screen

M4x10/12/16mm

Phillips Head Mounting

Screws

6.1 Install VESA monitor head as shown.

7.1 Unlock handgrip and raise so

that handgrip tab protrudes

7.4 Slide the Arm Assembly and

Handgrip down the pole before locking

the handgrip at the desired height

7.5 Insert Pole Top

Cap into Pole. This is

also where the Allen

Key is stored.

7.3 Slip the Arm Assembly

over the Handgrip Tab and

then onto the Pole

7.2 OPTIONAL ROTATION LIMITER

Insert rotation limiter for 180�

rotation around mounting pole

100mm

8. Mounting Monitor

VESA monitor head

Arm Assembly

8.2 OPTIONAL SECURITY SCREW

Ensure the Monitor is supported, then loosen the Monitor head

screw with the 5mm Allen Key and tilt screen up before installing

the M4 x 16mm Security Screw into the Security Screw hole

Note: Support Screen

when adjusting tilt.

8.1 Insert VESA monitor head into

the receptacle in the Arm Assembly

5mm Allen Key

Phillips Head

Screwdriver

Loosen

Tighten

Security Screw

Hole

M4 x 16mm

Security Screw

Monitor head

screw

Product specificaties

Merk:	Atdec
Categorie:	Niet gecategoriseerd
Model:	AF-AT
Kleur van het product:	Zwart
Breedte:	422 mm
Hoogte:	525 mm
Breedte verpakking:	220 mm
Diepte verpakking:	580 mm
Hoogte verpakking:	95 mm
Materiaal behuizing:	Aluminium, Plastic
In hoogte verstelbaar:	Ja
Maximale gewichtscapaciteit:	8 kg
Paneelmontage-interface:	75 x 75, 100 x 100 mm
Aantal per verpakking:	1 stuk(s)
Draaihoek:	360 °
Aantal displays ondersteund:	1
(Buitenste) hoofdverpakking hoogte:	300 mm
(Buitenste) hoofdverpakking breedte:	455 mm
(Buitenste) hoofdverpakking brutogewicht:	17600 g
(Buitenste) hoofdverpakking lengte:	595 mm
Hoeveelheid per (buitenste) hoofdverpakking:	6 stuk(s)
Type product:	Flatscreen bevestigingsarm
Bereik kantelhoek:	-70 - 70 °