Atdec AF-AN-SW Handleiding

Atdec Niet gecategoriseerd AF-AN-SW

Lees hieronder de 📖 handleiding in het Nederlandse voor Atdec AF-AN-SW (3 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 305 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/3

AF-AN Page 1 of 3

COMPONENT CHECKLIST

Notebook tray

assembly

(x1)

Hand grip

assembly

(x1)

Rotation

limiter

(x1)

Primary arm

cable cover

(x1)

Secondary arm

cable cover

(x1)

Self adhesive

hook & loop

(x4 sets)

Installation Guide

AF-AN

Notebook Arm

IMPORTANT INFORMATION

! Please ensure this product is installed as per these installation instructions.

! This product is designed to be used in conjunction with an external keyboard and mouse.

! This product is compatible with the range of AF poles and arms.

! The manufacturer accepts no responsibility for incorrect installation.

WEIGHT RANGE

0 - 8kg

(0 - 17.6lbs)

AF-AN Page 2 of 3

5mm Allen key

Pole top cap

1. Remove existing arm and monitor from AF pole (Ensure monitor cables are unplugged)

1.1 Remove pole top cap and 5mm

allen key from the Visidec pole

1.2 Quick release the monitor from

arm assembly

1.3 Remove the arm assembly from AF pole

Handgrip

Tab

2. Attach notebook tray onto AF Pole

2.1 Slide the Handgrip onto

the top of the Visidec Pole

so the handgrip tab protrudes

3.2 Lock the monitor arm handgrip in the desired position

3.3 Insert pole top cap into pole.

This is also where the allen key is stored

3.1 Slide the existing arm and monitor onto the visidec pole

3. Re-install the existing arm and monitor

VESA

monitor

head

Arm

assembly

Notebook Tray

& Arm Assembly

2.2

OPTIONAL ROTATION LIMITER

Insert rotation limiter for 180�

rotation around mounting pole

2.3 Slip the notebook tray &

arm assembly over the handgrip

tab and then onto the pole

2.4 Slide the arm assembly

and handgrip down the pole

before locking the Handgrip

at the desired heighta

5mm

Allen key

Pole

top cap

3.4 Insert VESA monitor head into the receptacle

in the arm assembly

AF-AN Page 3 of 3

Lift

4. Install Notebook

4.1 Adjust the support tabs to suit the

width of the notebook computer ensuring

that cable ports are not obstructed

5.1 After plugging in your cables,

install the Cable Covers

4.2 To increase stability, use the self

adhesive Hook-and-Loop Fasteners supplied

• Peel off the backing paper to the fasteners

• Attach fasteners to both the Notebook

Tray and computer

• Ensure that each set of fasteners are

correctly aligned i.e. Hook to Loop

5.3 Cable Clips and Cable Stops can be installed

to further manage cables. Please See Over

Lock Slot

Allen Key

Storage

Loosen

Tighten

Loosen

Tighten

Horizontal

Adjustment

±95°

Portrait/Landscape

Rotation

±5°

±25° Tilt

Elbow joint

‘click’

5. Cable Management

6. Adjusting the display bracket

Note: After connecting

the Notebook Cables,

route them through

the Cable Management

Clip on the back of the

Notebook Tray.

Ensure enough cable slack is

given to allow for movement.

Adjust the tilt angle of the

notebook tray as desired,

locking it in position using

the 5mm allen key

TILT (tray angle up/down)

PAN (tray angle left/right)

Insert Cable Covers

up into Lock Slots.

5.2 Push Cable Covers away from

Elbow Joint to secure in place

atdec.com | atdec.co.uk | atdec.com.au

No portion of this document or any artwork contained herein should be reproduced in any way without

the express written consent of Atdec Pty Ltd. Due to continuing product development, the manufacturer

Product specificaties

Merk:	Atdec
Categorie:	Niet gecategoriseerd
Model:	AF-AN-SW
Kleur van het product:	Wit
Gewicht verpakking:	1740 g
Breedte verpakking:	320 mm
Diepte verpakking:	352 mm
Hoogte verpakking:	131 mm
Geschikt voor schermmaten:	18 - 18 "
Materiaal:	Aluminium, Plastic
Aantal per verpakking:	1 stuk(s)
Compatibiliteit:	AF-AT
Draaihoek:	360 °
(Buitenste) hoofdverpakking hoogte:	410 mm
(Buitenste) hoofdverpakking breedte:	345 mm
(Buitenste) hoofdverpakking brutogewicht:	11500 g
(Buitenste) hoofdverpakking lengte:	725 mm
Bereik kantelhoek:	10 - 35 °