Atdec A-STSFB Handleiding

Atdec Niet gecategoriseerd A-STSFB

Lees hieronder de 📖 handleiding in het Nederlandse voor Atdec A-STSFB (3 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 229 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/3

Lift Mechanism

Tabletop Base

DKeyboard Bracket

Keyboard Tray

C Keyboard Panel

BW kor Surface

Spacer (x2)Square Pad (x2)

Round Pad (x4)

Large Allen Key Small Allen Key

M6X8 (x2) M6X25 (x4)M6X12 (x10) M6X35 (x2)

G H I J

LK M N O

Hardware

Installation Instructions

Sit-to-Stand Workstation

Freestanding

Step 1. Check components

Component Checklist

A-STSFB

Check that you have received all parts against the Component Checklist.

IMPORTANT INFORMATION

! IMPORTANT - Install as per Installation Instructions

! This product is compatible with VisidecTM Focus and SYSTEMATM monitor mounts.

! This product supports a total maximum load of 28.6lbs ( ). 13Kg

! The manufacturer accepts no responsibility for incorrect installation.

! Excessive pressure on the Keyboard Tray may result in the workstation tipping over.

! Ensure any required electrical/data cables have sufﬁcient length to accommodate the sit-to-stand workstation’s movement.

Step 2. Attach lift mechanism to work surface

Step 3. Attach keyboard bracket and tray

Step 4. Assemble tabletop base

Lift Paddle

Alternate Position

The lift paddle can

be attached on the

left or right side of

the work station.

Cable Routing

Route the lift

paddle cable

through the slot in

the plates on the lift

mechanism (A)

3.1

4.1

4.2

4.3

3.2

3.3

Caution

Avoid pressing

the lift paddle

until Step 4.

Caution

When pressing the

paddle, the lift mechanism

will rise. Keep clear as the

arm rises.

Depress the lift paddle to

raise the lift mechanism.

Lift

Paddle

45˚

No portion of this document or any artwork contained herein should be reproduced in any way without the express written consent of Atdec Pty Ltd.

Due to the continuing product development, the manufacturer reserves the right to alter speciﬁcations without notice. Published 5/11/15 ©

Step 5. How to adjust from sitting to standing

Installation Complete

Step 6. Adjust lift assistance

Push

Note:

For heavier weights turn the

adjustment screw towards ‘ ’+

For lighter weights turn the

adjustment screw towards ‘ ’-

Adjust the amount

of lift assistance. The

workstation should

not fall when the lift

paddle is depressed.

While gripping onto the sides of the work surface, depress the lift paddle to adjust the height of the work station.

6.26.1

This workstation is compatible with accessories such as monitor mounts. For advice on positioning accessories on

this workstation please refer to the Technical Speciﬁcations for this product, found on atdec.com.

Position the workstation at mid height

While gripping onto the sides of the work

surface, depress the lift paddle and adjust

the angle of the lift mechanism to 45° from

the table.

Product specificaties

Merk:	Atdec
Categorie:	Niet gecategoriseerd
Model:	A-STSFB
Kleur van het product:	Zwart
In hoogte verstelbaar:	Ja
Montagewijze:	Bureau
Maximale gewichtscapaciteit:	12 kg
Aantal displays ondersteund:	1