Argon TT1v2 Handleiding


Lees hieronder de πŸ“– handleiding in het Nederlandse voor Argon TT1v2 (2 pagina's) in de categorie Platenspeler. Deze handleiding was nuttig voor 23 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2
ξ˜ƒ ξ˜ƒξ˜ƒξ˜ƒξ˜ƒξ˜ƒξ˜ƒξ˜ƒξ˜ƒξ˜ƒξ˜ƒξ˜ƒξ˜ƒξ˜ƒξ˜ƒξ˜ƒξ˜ƒξ˜ƒξ˜ƒξ˜ƒξ˜ƒξ˜ƒ
ξ˜ƒ ξ˜ƒ
ξ˜ƒ ξ˜ƒw w w . a r g o n a u d i o . c o m 1
TT1
v
2
Introduction
Dear Customer,
Quality has always been our driving force and founding
Argon Audio is a natural extension of this philosophy.
We have 20 years’ experience in creating and
specifying high quality products, manufacturing them
and selling them on to end users with Value-for-Money
as the primary aim.
And Argon Audio is a brand fully compliant with these
values.
Design, features and quality standards are all specified
in Denmark and manufacturing takes place in the Far
East and United Kingdom where quality vendors are
highly competitive - and as a result supply outstanding
Value-for-Money products
– To the delight of both ourselves and our customers!
Congratulations with your TT1 turntable, may it bring
years of enjoyment.
Safety
Safety Instructions
Please store this instruction manual for future
reference.
ο‚· Do not use this product near water or moisture.
Clean only with a dry cloth.
Unplug this product from the wall outlet before
cleaning.
ο‚· Place the unit on a solid surface.
ο‚· Do not put it in a closed bookcase or a cabinet that
may keep air from flowing through its ventilation
openings.
ο‚· Do not install near any heat sources, such as
radiators, heat registers, stoves or other appliances
that produce heat.
ο‚· Protect the power cord from being walked on or
pinched, particularly at plugs and the point where
they exit from the product.
ο‚· Servicing is required when the product has been
damaged. Do not attempt to service this product
yourself. Opening or removing covers may expose
you to dangerous voltages or other hazards.
Please contact the manufacturer to be referred to
an authorized service center near you.
ο‚· To prevent risk of fire or electric shock, avoid over
loading wall outlets, extension cords, or integral
convenience receptacles.
ο‚· Do not let objects or liquids enter the product.
ο‚· Use proper power sources. Plug the product into a
proper power source, as described in the operating
instructions or as marked on the product.
About TT1
The TT1 has been designed and engineered to achieve
outstanding performance way beyond the expectations
of a product at this price point. Excellent build quality,
reliability and ease of use combine to make a product
which if used correctly will offer you a lifetime of musical
enjoyment.
Omitting all the usual gimmicks allows us to concentrate
the manufacturing costs on the high quality parts
necessary to reproduce records accurately. Using a
manual speed change rather than an automatic
mechanism eliminates speed inconsistencies and
reduces wear of the drive belt. The money we save is
spent across the design including a hand assembled
tonearm, precision main bearing and a high quality low
vibration motor which would normally be used on a
turntable costing two or three times the amount.
The minimalist design of the Argon TT1 and the use of
extremely high quality components ensure that your
turntable should last for many years. The tips on the
reverse of these instructions will help increase the life of
your turntable and ensure optimum performance.
Operating Your TT1
Manual speed change 33 RPM 45 RPM
You can change playing speed by simply removing the
latter and moving the belt to either the 33rpm or 45rpm
wheel of the drive pulley see fig 1.
T U R N T A B L E U S E R M A N U A L
ξ˜ƒ ξ˜ƒξ˜ƒξ˜ƒξ˜ƒξ˜ƒξ˜ƒξ˜ƒξ˜ƒξ˜ƒξ˜ƒξ˜ƒξ˜ƒξ˜ƒξ˜ƒξ˜ƒξ˜ƒξ˜ƒξ˜ƒξ˜ƒξ˜ƒξ˜ƒ
ξ˜ƒ ξ˜ƒ
ξ˜ƒ ξ˜ƒw w w . a r g o n a u d i o . c o m 2
TT1v2
Connection to the amplifier
The external phono leads must be connected to your
amplifier.
Connections : Red right channel / Black left channel. If
your amplifier does not have an integrated phono stage
you will need to require an external phone stage. Ask at
your local hi-fi dealer..
Plug and play - Quick set up (factory fitted cartridge
only)
Your turntable has been designed to be very simple to
set-up and use. We have designed this turntable so that
correct tracking weight can be achieved by simply
pushing the balance weight as close to the stop point
as possible. Fig 2. This will automatically set the arm to
within the recommended tracking range for the factory
fitted stylus (1.5g - 2.0g). The Bias slider should be set
to the same figure as the tracking weight. Fig 3.
Advanced Set-up (when using a different model of
cartridge)
If you choose to change the factory fitted cartridge a
tracking pressure gauge is required to correctly apply
the required down force. Any Hi-Fi dealer should be
happy to help with this setup procedure when you
purchase a new cartridge. Always use a down force
which corresponds to the upper limit of the cartridge
maker's recommended range. A new cartridge must be
aligned correctly as shown in fig 4. Adjust the cartridge
position in the head-shell so that the stylus tip is
vertically aligned with the front of the hole marked A.
Ensure the cartridge is sitting square in the head-shell
before fully tightening.(Take care not to over tighten.
Set the bias adjustment slider fig 3. to the same number
as the tracking force. For example 1.5g tracking force =
1.5 on the bias slider.
Hints & Tips
Mount the turntable on a rigid, level surface. Avoid
mounting on hollow or heavy cabinets or anything
mounted on a flexible wooden floor. The Argon
turntable support is the ideal solution.
Keeping the lid closed while playing records will prevent
dust falling on to the record surface and should make
cleaning unnecessary. Depending on the room
environment and ambient temperature, playing with the
lid open may offer sonic improvements. You can
experiment to optimise the performance best suited to
your room.
Do not use any record cleaner that works while the
record is playing or any cleaners that use water or
solvents. If you keep your records stored in their
sleeves, avoid touching the playing surfaces and keep
all water and fluids away, cleaning should not be
necessary. Do not worry about visible dust on the
record surface, this is brushed aside by the stylus and
any that collects on the stylus can be easily blown
away. In general, record cleaning is overdone and one
should not believe all the claims made by record
cleaner manufacturers.
Leave the turntable running during a record playing
session. Switch on before the session and only switch
off after you have finished. This will increase the life of
the motor and drive belt.
Do not lift the centre hub out from the main bearing.
The bearing is factory assembled with a film of special
thick lubricant. If the centre hub is removed this film
may be disturbed and the accuracy of the turntable
could be affected.
The arm earth (or ground) is automatically connected
through the arm cable screening. No other earthing
should be necessary.
Save the original packing in case you ever need to
transport the turntable.
Do not use any polish on the turntable or lid. To clean,
wipe gently with a soft cotton duster (slightly damp only
if required).
Argon turntables are designed to optimise performance
for music reproduction and therefore no compromises
have been made to give quick start times. The normal
time taken for full speed to be reached is between 2
and 5 seconds.
Warning: Any attempt to repair or modify this turntable
by persons other than authorized personnel may
invalidate the guarantee. Should you experience any
problem with your turntable please contact your dealer.


Product specificaties

Merk: Argon
Categorie: Platenspeler
Model: TT1v2

Heb je hulp nodig?

Als je hulp nodig hebt met Argon TT1v2 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Platenspeler Argon

Argon

Argon TT-4 Handleiding

28 Maart 2023
Argon

Argon TT1v2 Handleiding

18 September 2022
Argon

Argon TT2 Handleiding

18 September 2022
Argon

Argon TT Handleiding

18 September 2022
Argon

Argon TT2 USB Handleiding

18 September 2022

Handleiding Platenspeler

Nieuwste handleidingen voor Platenspeler