Zebra FX7500 Handleiding
Zebra
Tv-antenne
FX7500
Lees hieronder de 📖 handleiding in het Nederlandse voor Zebra FX7500 (2 pagina's) in de categorie Tv-antenne. Deze handleiding was nuttig voor 42 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/2
FX7500 RFID Reader
Quick Start Guide
Zebra reserves the right to make changes to any product to improve
reliability, function, or design.
Zebra does not assume any product liability arising out of, or in connection
with, the application or use of any product, circuit, or application described
herein.
No license is granted, either expressly or by implication, estoppel, or
otherwise under any patent right or patent, covering or relating to any
combination, system, apparatus, machine, material, method, or process in
which Zebra products might be used. An implied license exists only for
equipment, circuits, and subsystems contained in Zebra products.
Zebra Technologies Corporation
Lincolnshire, IL U.S.A.
www.zebra.com
© 2018 ZIH Corp and/or its affiliates. All rights reserved. ZEBRA and the
stylized Zebra head are trademarks of ZIH Corp, registered in many
jurisdictions worldwide. All other trademarks are the property of their
respective owners.
MN000070A07 Revision A — June 2018
1 2 3
Introduction
FX7500 Series readers provide real time, seamless tag processing for EPC
Class1 Gen2 compliant tags. This Quick Start Guide provides information
about installing and connecting the reader. For more information refer to the
FX Series RFID Fixed Reader Integration Guide
, available at:
www.zebra.com/support.
Reader Installation
1. Unpack the reader.
2. Set up the reader and tags on a desktop.
3. Connect the antenna to antenna Port 1.
4. Connect the Ethernet cable to the Ethernet port.
Connecting the reader to a subnet that supports DHCP is recommended.
This installation procedure is not guaranteed to work if DHCP is disabled
in the reader and if the reader is connected directly to a PC.
5. Connect the AC power supply to a power outlet and connect to the power
port.
The green power LED remains lit after successfully powering up.
Connecting to the Reader
To connect via host name:
1. Open a browser. Refer to the
FX Series RFID Fixed Reader Integration
Guide
for recommended browsers.
2. Enter the host name, provided on a label on the reader, in the browser
(e.g., http://fx7500cd3b0d) and press Enter
.
The User Login window
appears and the reader is ready.
3. If you are using a worldwide device, go to Configure Reader > Region to
set the country in which you are using the device.
Additional Information
Following are links to additional information and software:
Product Manuals available at: www.zebra.com/support
-
FX Series RFID Fixed Reader Integration Guide
(p/n MN000026Axx)
-
RFID Reader Software Interface Control Guide
(p/n 72E-131718-xx)
-
RFID Demo Applications User Guide
(p/n 72E-160038-
xx
)
•
Data Sheet: www.zebra.com/FX7500.
•
PowerSession and other related software:
www.zebra.com/support.
Regulatory Information
This provides information for the Zebra, FX series RFID Reader products,
Regulatory Model No: FX7500. For information on setting up and using the
reader, refer to the
FX Series RFID Fixed Reader Integration Guide
at
www.zebra.com/support.
All Zebra devices are designed to be compliant with rules and regulations in
locations they are sold and will be labeled as required. Local language
translations are available at the following website: www.zebra.com/support.
Zebra devices must be professionally installed. The Radio Frequency Output
Power will not exceed the maximum allowable limit for the country of
operation. Any changes or modifications to Zebra equipment, not expressly
approved by Zebra, could void the authority to operate the equipment.
Antennas
Use only the supplied or an approved replacement antenna. Unauthorized
antennas, modifications, or attachments could cause damage and may
violate regulations.
Health and Safety Recommendations
Warning for Use of Wireless Devices
Please observe all warning notices with regard to the usage of
wireless devices.
Potentially Hazardous Atmospheres
You are reminded of the need to observe restrictions on the use of radio
devices in fuel depots, chemical plants etc. and areas where the air contains
chemicals or particles (such as grain, dust, or metal powders).
Safety in Hospitals
Wireless devices transmit radio frequency energy and may affect
medical electrical equipment. When installed adjacent to other
equipment, it is advised to verify that the adjacent equipment is not adversely
affected.
Use With Hearing Aids
When some wireless devices are used near some hearing devices (hearing
aids and cochlear implants), users may detect a buzzing, humming, or
whining noise. Some hearing devices are more immune than others to this
interference noise, and wireless devices also vary in the amount of
interference they generate. In the event of interference you may want to
consult your hearing aid supplier to discuss solutions.
Other Medical Devices
Please consult your physician or the manufacturer of the medical device, to
determine if the operation of your wireless product may interfere with the
medical device.
FCC / EU RF Exposure Guidelines
Safety Information
Reducing RF Exposure - Use Properly
Only operate the device in accordance with the instructions supplied.
International
The device complies with internationally recognized standards covering
human exposure to electromagnetic fields from radio devices. For
information on "International" human exposure to electromagnetic fields refer
to the Zebra Declaration of Conformity (DoC) at www.zebra.com/doc.
For further information on the safety of RF energy from wireless devices, see
responsibility.zebra.com/index.php/downloads/, which is located under
Wireless Communications and Health.
US and Canada
To comply with FCC RF exposure requirements, antennas that are mounted
externally at remote locations or operating near users at stand-alone desktop
or similar configurations must operate with a minimum separation distance of
34 cm from all persons.
EU
To comply with EU RF exposure requirements, antennas that are mounted
externally at remote locations or operating near users at stand-alone desktop
or similar configurations must operate with a minimum separation distance of
34 cm from all persons.
Power Supply
This device must be powered from an 802.3af or 802.3at compliant power
source which has been certified by the appropriate agencies, or by a Zebra
approved UL LISTED ITE (IEC/EN60950-1) power supply with electrical
ratings: Output 24Vdc, min 3.25A, with a recommended ambient
temperature of at least 40 degrees C. Use of alternative power supply will
invalidate any approvals given to this unit and may be dangerous.
Air Handling Space Applications
This device is suitable for use in Environmental Air Handling Space (EAHS)
in accordance with Section 300-22(c) of the National Electric Code, and
Sections 2-128, 12-010(3) and 12-100 of the Canadian Electrical Code, Part
21, CSA C22.1.
All Cables intended for interconnecting the FX7500 to other devices shall be
suitable rated for use in Environmental Air Handling Space per UL 2043.
Devices such as Power Adapters, PoE (Power Injectors), antennas shall not
be installed in the Environmental Air Handling Space unless they are suitable
for use in the EAHS per UL 2043.
Wireless Devices Country Approvals
Regulatory markings, subject to certification, are applied to the device
signifying the radio is approved for use in the following countries: United
States, Canada, Japan, China, South Korea, Australia, and Europe
1
Please refer to the Zebra Declaration of Conformity (DoC) for details of other
country markings. This is available at www.zebra.com/doc.
Operation of the device without regulatory approval is illegal.
Note1: Europe includes, Austria, Belgium, Bulgaria, Croatia, Czech Republic,
Cyprus, Denmark, Estonia, Finland, France, Germany, Greece, Hungary,
Iceland, Ireland, Italy, Latvia, Liechtenstein, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Slovak Republic,
Slovenia, Spain, Sweden, Switzerland and the United Kingdom.
Country Selection - Worldwide Version Only
Select only the country in which you are using the device. Any other
selection will make the operation of this device illegal.
NOTE This step is not required for networks supporting
Power-over-Ethernet (POE).
NOTE Connect the reader to a network that supports host name
registration and lookup to ensure the network can access
the reader using the host name. For instance, some
networks can register host names through DHCP. When
first connecting to the reader, it is recommended to keep
DHCP enabled in both the PC and in the reader, although it
is not guaranteed that host name will work all the time.
If the host name label is missing, construct the host name
using the reader MAC address on the bottom of the reader.
To do this, enter the prefix FX7500, followed by the last six
characters of the MAC address. For example, for a MAC
address of 0023683BA63A, use the prefix FX7500,
followed by 3BA63A.
Enter http://FX75003BA63A in the browser address bar to
access the reader.
If the host name method does not work, refer to the section,
Connecting to the Reader
in the
FX Series RFID Fixed
Reader Integration Guide
for other connection options.
Port 1 Port 2 Port 3 Port 4 GP
Antenna Port 1
Port 4 GPIO 24 VDC
Power10/100 BaseT Ethernet Port
(with POE)
5 6 74
Frequency of Operation – USA (FCC) and
Canada
The range of channels is limited by firmware.
Radio Frequency Interference Requirements - FCC
Note: This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
•
Reorient or relocate the receiving antenna
•
Increase the separation between the equipment and receiver
•
Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected
•
Consult the dealer or an experienced radio/TV technician for help
Radio Transmitters (Part 15)
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Radio Frequency Interference Requirements - Canada
CAN ICES-3 (B)/NMB-3(B)
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du
Canada.
Radio Transmitters
This device is in compliance with the NRC for Industry Canada applicable to
license-exempt radios. Use is allowed with the following two conditions: (1)
the device must not produce interference, and (2) the device must accept
any interference to the radio even if the interference is likely to compromise
operation.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables
aux appareils radio exempts de licence. L'exploitation est autorisée aux deux
conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2)
l'utilisateur de l'appareil doit accepter tout brouillage radio électrique subi
même si le brouillage est susceptible d'en compromettre le fonctionnement.
Label Marking: The Term "IC:" before the radio certification only signifies that
Industry Canada technical specifications were met.
In accordance with the regulations of Industry Canada, this radio transmitter
can operate with an antenna of a type and a maximum gain (or lower)
approved for the transmitter by Industry Canada. With the aim of reducing
the risk of radio interference to other users, the chosen antenna type and its
gain should be selected so that the equivalent isotropically radiated power
(e.i.r.p.) does not exceed the intensity necessary for the establishment of a
satisfactory connection.
Conformément à la réglementation d'Industrie Canada, le présent émetteur
radio peut fonctionner avec une antenne d'un type et d'un gain maximal (ou
inférieur) approuvé pour l'émetteur par Industrie Canada. Dans le but de
réduire les risques de brouillage n des autres radio électrique à l'intentio
utilisateurs, il faut choisir le type d'antenne et son gain de sorte que la
puissance isotrope rayonnée équivalente (p.i.r.e.) ne dépasse pas l'intensité
nécessaire à l'établissement d'une communication satisfaisante.
The FX7500 has been approved by Industry Canada to operate with the
antenna types listed below and having a maximum gain allowable and the
impedance required for each type of antenna. The antenna types not
included in this list, or whose gain is higher than the maximum gain
indicated, are strictly prohibited for the operation of the transmitter.
Le FX7500 a été approuvé par Industrie Canada pour fonctionner avec les
types d'antenne énumérés ci-dessous et ayant un gain admissible maximal
et l'impédance requise pour chaque type d'antenne. Les types d'antenne non
inclus dans cette liste ou dont le gain est supérieur au gain maximal indiqué,
sont strictement interdits pour l'exploitation de l'émetteur.
Circular polarized plate +6.6dBiL 50ohms
Marking and European Economic Area
(EEA)
Statement of Compliance
Zebra hereby declares that this radio equipment is in compliance with
Directive 2011/65/EU and 1999/5/EC or 2014/53/EU (2014/53/EU
supersedes 1999/5/EC from 13th June 2017).
The full text of the EU Declaration of Conformity is available at the following
internet address: www.zebra.com/doc.
Country Approvals
Brasil
Declarações Regulamentares para FX7500 - Brasil
Nota: A marca de certificação se aplica ao Transceptor, modelo FX7500.
Este equipamento opera em caráter secundário, isto é, não tem direito a
proteção contra interferência prejudicial, mesmo de estações do mesmo
tipo, e não pode causar interferência a sistemas operando em caráter
primário.
Para maiores informações sobre ANATEL consulte o site:
www.anatel.gov.br
Chile
Este equipo cumple con la Resolución No 403 de 2008, de la Subsecretaria
de telecomunicaciones, relativa a radiaciones electromagnéticas.
China
通过访问以下网址可下载当地语言支持的产品说明书
www.zebra.com/contact
Korea Warning Statement for Class B ITE
Taiwan
臺灣
低功率電波輻射性電機管理辦法
第十二條
經型式認證合格之低功率射頻電機,非經許可,公司、商號或使用者均不得擅自變更頻
率、加大功率或變更原設計之特性及功能。
第十四條
低功率射頻電機之使用不得影響飛航安全及干擾合法通信;經發現有干擾現象時,應立
即停用,並改善至無干擾時方得繼續使用。
前項合法通信,指依電信規定作業之無線電通信。
低功率射頻電機須忍受合法通信或工業、科學及醫療用電波輻射性電機設備之干擾。
Operation of the device without regulatory approval is illegal.
Thailand
เครื่ องโทรคมนาคมและอปกรณนี้ มี ํความสอดคล องตามข อกาหนดของ กทช .
Ukraine
Дане обладнання відповідає вимогам технічного регламенту № 1057, №
2008 на обмеження щодо використання деяких небезпечних речовин в
електричних та електронних пристроях.
Eurasian Customs Union
Евразийский Таможенный Союз
Данный продукт соответствует требованиям знака EAC.
Waste Electrical and Electronic Equipment
(WEEE)
English: For EU Customers: All products at the end of their life must be returned to
Zebra for recycling. For information on how to return product, please go to:
www.zebra.com/weee.
Bulgarish: За клиенти от ЕС: След края на полезния им живот всички продукти
трябва да се връщат на Zebra за рециклиране. За информация относно
връщането на продукти, моля отидете на адрес: www.zebra.com/weee.
Čeština: Pro zákazníky z EU: Všechny produkty je nutné po skonèení jejich životnosti
vrátit spoleènosti Zebra k recyklaci. Informace o zpùsobu vrácení produktu najdete na
webové stránce: www.zebra.com/weee.
Dansk: Til kunder i EU: Alle produkter skal returneres til Zebra til recirkulering, når de er
udtjent. Læs oplysningerne om returnering af produkter på: www.zebra.com/weee.
Deutsch: Für Kunden innerhalb der EU: Alle Produkte müssen am Ende ihrer Lebens-
dauer zum Recycling an Zebra zurückgesandt werden. Informationen zur Rücksendung
von Produkten finden Sie unter www.zebra.com/weee.
Ελληνικά: Για πελάτες στην Ε.Ε.: Όλα τα προϊόντα, στο τέλος της διάρκειας ζωής τους,
πρέπει να επιστρέφονται στην Zebra για ανακύκλωση. Για περισσότερες πληροφορίες
σχετικά με την επιστροφή ενός προϊόντος, επισκεφθείτε τη διεύθυνση
www.zebra.com/weee στο Διαδίκτυο.
Eesti: EL klientidele: kõik tooted tuleb nende eluea lõppedes tagastada taaskasutamise
eesmärgil Zebra'ile. Lisainformatsiooni saamiseks toote tagastamise kohta külastage
palun aadressi: www.zebra.com/weee.
Español: Para clientes en la Unión Europea: todos los productos deberán entregarse a
Zebra al final de su ciclo de vida para que sean reciclados. Si desea más información
sobre cómo devolver un producto, visite: www.zebra.com/weee.
Français : Clients de l'Union Européenne : Tous les produits en fin de cycle de vie
doivent être retournés à Zebra pour recyclage. Pour de plus amples informations sur le
retour de produits, consultez : www.zebra.com/weee.
Hrvatski: Za kupce u Europskoj uniji: Svi se proizvodi po isteku vijeka trajanja moraju
vratiti tvrtki Zebra na recikliranje. Informacije o načinu vraćanja proizvoda potražite na
web-stranici: www.zebra.com/weee.
Italiano: per i clienti dell'UE: tutti i prodotti che sono giunti al termine del rispettivo ciclo
di vita devono essere restituiti a Zebra al fine di consentirne il riciclaggio. Per informazi-
oni sulle modalità di restituzione, visitare il seguente sito Web: www.zebra.com/weee.
Latviešu: ES klientiem: visi produkti pēc to kalpošanas mūža beigām ir jānogādā atpa-
kaļ Zebra otrreizējai pārstrādei. Lai iegūtu informāciju par produktu nogādāšanu Zebra,
lūdzu, skatiet: www.zebra.com/weee.
Lietuvių: ES vartotojams: visi gaminiai, pasibaigus jų eksploatacijos laikui, turi būti
grąžinti utilizuoti į kompaniją „Zebra“. Daugiau informacijos, kaip grąžinti gaminį, rasite:
www.zebra.com/weee.
Magyar: Az EU-ban vásárlóknak: Minden tönkrement terméket a Zebra vállalathoz kell
eljuttatni újrahasznosítás céljából. A termék visszajuttatásának módjával kapcsolatos
tudnivalókért látogasson el a www.zebra.com/weee weboldalra.
Malti: Għal klijenti fl-UE: il-prodotti kollha li jkunu waslu fl-aħħar tal-ħajja ta' l-użu
tagħhom, iridu jiġu rritornati għand Zebra għar-riċiklaġġ. Għal aktar tagħrif dwar kif
għandek tirritorna l-prodott, jekk jogħġbok żur: www.zebra.com/weee.
Nederlands: Voor klanten in de EU: alle producten dienen aan het einde van hun lev-
ensduur naar Zebra te worden teruggezonden voor recycling. Raad pleeg
www.zebra.com/weee voor meer informatie over het terugzenden van producten.
Polski: Klienci z obszaru Unii Europejskiej: Produkty wycofane z eksploatacji nale¿y
zwróciæ do firmy Zebra w celu ich utylizacji. Informacje na temat zwrotu produktów zna-
jduj¹ siê na stronie internetowej www.zebra.com/weee.
Português: Para clientes da UE: todos os produtos no fim de vida devem ser devolvi-
dos à Zebra para reciclagem. Para obter informações sobre como devolver o produto,
visite: www.zebra.com/weee.
Românesc: Pentru clienţii din UE: Toate produsele, la sfârşitul duratei lor de funcţion-
are, trebuie returnate la Zebra pentru reciclare. Pentru informaţii despre returnarea pro-
dusului, accesaţi: www.zebra.com/weee.
Slovenčina: Pre zákazníkov z krajín EU: Všetky výrobky musia byť po uplynutí doby
ich životnosti vrátené spoločnosti Zebra na recykláciu. Bližšie informácie o vrátení
výrobkov nájdete na: www.zebra.com/weee.
Slovenski: Za kupce v EU: vsi izdelki se morajo po poteku življenjske dobe vrniti pod-
jetju Zebra za reciklažo. Za informacije o vraèilu izdelka obišèite:
www.zebra.com/weee.
Suomi: Asiakkaat Euroopan unionin alueella: Kaikki tuotteet on palautettava kier-
rätettäväksi Zebra-yhtiöön, kun tuotetta ei enää käytetä. Lisätietoja tuotteen palautta-
misesta on osoitteessa www.zebra.com/weee.
Svenska: För kunder inom EU: Alla produkter som uppnått sin livslängd måste return-
eras till Zebra för återvinning. Information om hur du returnerar produkten finns på
www.zebra.com/weee.
Türkçe: AB Müşterileri için: Kullanım süresi dolan tüm ürünler geri dönüştürme için
Zebra'ya iade edilmelidir. Ürünlerin nasıl iade edileceği hakkında bilgi için lütfen şu
adresi ziyaret edin: www.zebra.com/weee.
TURKISH WEEE Statement of Compliance
EEE Yönetmeligine Uygundur
China RoHS
This table was created to comply with China RoHS requirements.
本表格依据 SJ/T 11364 的规定编制。
O: 表示该有害物质在该部件所有均质材料中的含量均在 GB/T 26572 规定
的限量要求以下。
X: 表示该有害物质至少在该部件的某一均质材料中的含量超出 GB/T
26572 规定的限量要求。( 企业可在此处,根据实际情况对上表中打 “×”
的技术原因进行进一步说明。)
This table was created to comply with China RoHS requirements.
Service Information
If you have a problem using the equipment, contact your facility’s Technical
or Systems Support. If there is a problem with the equipment, they will
contact Zebra Support at: www.zebra.com/support.
For the latest version of FX7500 guides and software, go to:
www.zebra.com/support.
Warranty
For the complete Zebra hardware product warranty statement, go to:
www.zebra.com/warranty.
For Australia Only:
For Australia Only. This warranty is given by Zebra Technologies Asia
Pacific Pte. Ltd., 71 Robinson Road, #05-02/03, Singapore 068895, Singa-
pore. Our goods come with guarantees that cannot be excluded under the
Australia Consumer Law. You are entitled to a replacement or refund for a
major failure and compensation for any other reasonably foreseeable loss or
damage. You are also entitled to have the goods repaired or replaced if the
goods fail to be of acceptable quality and the failure does not amount to a
major failure.
Zebra Technologies Corporation Australia’s limited warranty above is in
addition to any rights and remedies you may have under the Australian
Consumer Law. If you have any queries, please call Zebra Technologies
Corporation at +65 6858 0722. You may also visit our website:
www.zebra.com for the most updated warranty terms.
기 종 별 사 용 자 안 내 문
B 급 기기
( 가정용
방송통신기자재 )
이 기기는 가정용 (B 급 ) 전자파적합기기로서 주로
가정에서 사용하는 것을 목적으로 하며 , 모든 지역에서
사용할 수 있습니다 .
部件名称
(Parts)
有害物质
铅
(Pb)
汞
(Hg)
镉
(Cd)
六价铬
(Cr(VI)
多溴联苯
(PBB)
多溴二苯醚
(PBDE)
金属部件
(Metal Parts)
X O O O O O
电路模块
(Circuit Modules)
X O O O O O
电缆及电缆组件
(Cables and Cable
Assemblies)
O O O O O O
塑料和聚合物部件
(Plastic and Polymeric
Parts)
O O O O O O
光学和光学组件
(Optics and Optical
Components)
O O O O O O
电池
(Batteries)
O O O O O O
•
10
Product specificaties
Merk: | Zebra |
Categorie: | Tv-antenne |
Model: | FX7500 |
Heb je hulp nodig?
Als je hulp nodig hebt met Zebra FX7500 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Tv-antenne Zebra
18 Mei 2023
10 Mei 2023
15 April 2023
5 April 2023
30 Maart 2023
16 Januari 2023
Handleiding Tv-antenne
- Tv-antenne Philips
- Tv-antenne Garmin
- Tv-antenne Alpine
- Tv-antenne Audiovox
- Tv-antenne Blaupunkt
- Tv-antenne D-Link
- Tv-antenne DeLock
- Tv-antenne Digi
- Tv-antenne Edimax
- Tv-antenne Hama
- Tv-antenne Hirschmann
- Tv-antenne Icarus
- Tv-antenne Icy Box
- Tv-antenne Kathrein
- Tv-antenne LevelOne
- Tv-antenne Maximum
- Tv-antenne Megasat
- Tv-antenne Meliconi
- Tv-antenne Mikrotik
- Tv-antenne Nedis
- Tv-antenne President
- Tv-antenne Sencor
- Tv-antenne Strong
- Tv-antenne Telestar
- Tv-antenne Thomson
- Tv-antenne Toa
- Tv-antenne TP Link
- Tv-antenne Uniden
- Tv-antenne Winegard
- Tv-antenne Xoro
- Tv-antenne Zehnder
- Tv-antenne One For All
- Tv-antenne Clas Ohlson
- Tv-antenne Exibel
- Tv-antenne GoGEN
- Tv-antenne Schwaiger
- Tv-antenne Shure
- Tv-antenne Steren
- Tv-antenne Clarion
- Tv-antenne EMOS
- Tv-antenne King
- Tv-antenne Majestic
- Tv-antenne Cisco
- Tv-antenne EVOLVEO
- Tv-antenne Whistler
- Tv-antenne Audix
- Tv-antenne Intellinet
- Tv-antenne Monster
- Tv-antenne Metra
- Tv-antenne IC Intracom
- Tv-antenne Wentronic
- Tv-antenne August
- Tv-antenne Hawking Technologies
- Tv-antenne Terk
- Tv-antenne Antennas Direct
- Tv-antenne Wireless Solution
- Tv-antenne RetroSound
- Tv-antenne Lectrosonics
- Tv-antenne Mohu
- Tv-antenne DPM
- Tv-antenne Wilson Electronics
- Tv-antenne Wilson
- Tv-antenne RF Elements
Nieuwste handleidingen voor Tv-antenne
23 December 2024
23 December 2024
23 December 2024
16 December 2024
10 December 2024
9 December 2024
2 December 2024
2 December 2024
2 December 2024
2 December 2024