Worx WX177.9 Handleiding

Worx Boormachine WX177.9

Lees hieronder de 📖 handleiding in het Nederlandse voor Worx WX177.9 (16 pagina's) in de categorie Boormachine. Deze handleiding was nuttig voor 43 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/16
WX177 WX177.X
20V Cordless Brushless
Switchdriver 2.0
SAFETY AND OPERATING MANUAL
ORIGINAL INSTRUCTIONS
3
WX177 WX177.X
20V Cordless Brushless
Switchdriver 2.0
TABLE OF CONTENT
1. SAFETY INSTRUCTIONS
2. COMPONENT LIST
3. TECHNICAL DATA
4. OPERATING INSTRUCTIONS
5. TROUBLESHOOTING
6. MAINTENANCE
7. ENVIRONMENTAL PROTECTION
8. DECLARATION OF CONFORMITY
1. PRODUCT SAFETY
GENERAL POWER TOOL
SAFETY WARNINGS
WARNING Read all safety warnings,
MRWXVYGXMSRWMPPYWXVEXMSRWERHWTIGMƼGEXMSRW
provided with this power tool.
Failure to follow all
instructions listed below may result in electric shock,
ƼVIERHSVWIVMSYWMRNYV]
Save all warnings and instructions for future
reference.
The term “power toolin the warnings refers to your
mains-operated (corded) power tool or battery-
operated (cordless) power tool.
1. WORK AREA SAFETY
a) Keep work area clean and well lit.
Cluttered or
dark areas invite accidents.
b) Do not operate power tools in explosive
atmospheres, such as in the presence of
ƽEQQEFPIPMUYMHWKEWIWSVHYWX
Power tools
create sparks which may ignite the dust or fumes.
c) Keep children and bystanders away while
operating a power tool.
Distractions can cause
you to lose control.
2. ELECTRICAL SAFETY
a) Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools.
9RQSHMƼIHTPYKWERHQEXGLMRKSYXPIXW[MPP
reduce risk of electric shock.
b) Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators.
There is an increased risk of electric
shock if your body is earthed or grounded.
c) Do not expose power tools to rain or wet
conditions.
Water entering a power tool will
increase the risk of electric shock.
d) Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges
or moving parts.
Damaged or entangled cords
increase the risk of electric shock
.
e) When operating a power tool outdoors, use an
extension cord suitable for outdoor use.
Use of a
cord suitable for outdoor use reduces the risk of
electric shock.
f) If operating a power tool in a damp location is
unavoidable, use a residual current device (RCD)
protected supply.
Use of an RCD reduces the risk
of electric shock.
3. PERSONAL SAFETY
a) Stay alert, watch what you are doing and use
common sense when operating a power tool. Do
not use a power tool while you are tired or under
XLIMRƽYIRGISJHVYKWEPGSLSPSVQIHMGEXMSR
A moment of inattention while operating power
XSSPWQE]VIWYPXMRWIVMSYWTIVWSREPMRNYV]
F 9WITIVWSREPTVSXIGXMZIIUYMTQIRX%P[E]W
wear eye protection.
Protective equipment
such as dust mask, non-skid safety shoes, hard
hat, or hearing protection used for appropriate
GSRHMXMSRW[MPPVIHYGITIVWSREPMRNYVMIW
c) Prevent unintentional starting. Ensure the
switch is in the off-position before connecting to
power source and/or battery pack, picking up or
carrying the tool.
Carrying power tools with your
ƼRKIVSRXLIW[MXGLSVIRIVKMWMRKTS[IVXSSPWXLEX
have the switch on invites accidents.
d) Remove any adjusting key or wrench before
turning the power tool on.
A wrench or a key left
attached to a rotating part of the power tool may
VIWYPXMRTIVWSREPMRNYV]
e) Do not overreach. Keep proper footing and
balance at all times.
This enables better control
of the power tool in unexpected situations.
f) Dress properly. Do not wear loose clothing or
jewellery. Keep your hair, clothing and gloves
away from moving parts.
0SSWIGPSXLIWNI[IPPIV]
or long hair can be caught in moving parts.
g) If devices are provided for the connection of dust
extraction and collection facilities, ensure these
are connected and properly used.
Use of dust
collection can reduce dust-related hazards.
L(SRSXPIXJEQMPMEVMX]KEMRIHJVSQJVIUYIRXYWI
of tools allow you to become complacent and
ignore tool safety principles.
A careless action
GERGEYWIWIZIVIMRNYV][MXLMREJVEGXMSRSJE
second.
4. POWER TOOL USE AND CARE
a) Do not force the power tool. Use the correct
power tool for your application.
The correct
TS[IVXSSP[MPPHSXLINSFFIXXIVERHWEJIVEXXLI
rate for which it was designed.
b) Do not use the power tool if the switch does not
turn it on and off.
Any power tool that cannot be
controlled with the switch is dangerous and must
be repaired.
c) Disconnect the plug from the power source and/
or the battery pack from the power tool before


Product specificaties

Merk: Worx
Categorie: Boormachine
Model: WX177.9

Heb je hulp nodig?

Als je hulp nodig hebt met Worx WX177.9 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Boormachine Worx

Handleiding Boormachine

Nieuwste handleidingen voor Boormachine

DeWalt

DeWalt DW9106 Handleiding

15 November 2024
MSW

MSW -DMS400 Handleiding

4 November 2024
DeWalt

DeWalt DCB126 Handleiding

2 November 2024
Vonroc

Vonroc CD510DC Handleiding

20 Oktober 2024
MSW

MSW -DDM300 Handleiding

16 Oktober 2024
MSW

MSW ACC-B1 Handleiding

16 Oktober 2024
MSW

MSW -DDM260 Handleiding

16 Oktober 2024
MSW

MSW -DDM132 Handleiding

16 Oktober 2024