Worx WX130L.9 Handleiding

Worx Boormachine WX130L.9

Lees hieronder de 📖 handleiding in het Nederlandse voor Worx WX130L.9 (32 pagina's) in de categorie Boormachine. Deze handleiding was nuttig voor 2 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/32
WX130L WX130L.X
20V Cordless Sub Compact Brushless Drill Driver
Perceuse-visseuse compacte à moteur sans balais et sans l 20 V
Taladro destornilladorinalámbrico subcompacto de 20V sin escobillas
P03
P14
P21
EN
F
ES
20V Cordless Sub Compact Brushless Drill Driver
EN
3
TABLE OF CONTENTS
1. PRODUCT SAFETY
2. COMPONENT LIST
3. TECHNICAL DATA
4. INTENDED USE
5. OPERATION INSTRUCTIONS
6. PROBLEM SOLUTION
7. MAINTENANCE
1.PRODUCT SAFETY
WARNING: Some dust created by power
sanding, sawing, grinding, drilling and other
construction activities contains chemicals known to
the State of California to cause cancer, birth defects
or other reproductive harm. Some examples of
these chemicals are:
• Lead from lead-based paints;
• Crystalline silica from bricks and cement and
other masonry products;
• Arsenic and chromium from chemically-treated
lumber.
Your risk from these exposures varies, depending
on how often you do this type of work. To reduce
your exposure to these chemicals: work in a well
ventilated area, and work with approved safety
equipment, such as those dust masks that are
specially designed to lter out microscopic
particles.
WARNING: This product can expose you to
chemicals including lead and Di(2-ethylhexyl)
phthalate (DEHP) which are known to the State of
California to cause cancer and birth defects or other
reproductive harm. For more information go to
www.P65Warnings.ca.gov .
GENERAL POWER TOOL SAFETY WARNINGS
WARNING: Read all safety warnings,
instructions, illustrations and specications
provided with this power tool. Failure to follow all
instructions listed below may result in electric shock,
re and/or serious injury.
Save all warnings and instructions for future
reference.
The term “power tool” in the warnings refers to your
mains-operated (corded) power tool or battery-
operated (cordless) power tool.
1) Work area safety
a) Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
b) Do not operate power tools in explosive
atmospheres, such as in the presence of
ammable liquids, gases or dust. Power tools
create sparks which may ignite the dust or
fumes.
c) Keep children and bystanders away while
operating a power tool. Distractions can cause
you to lose control.
2) Electrical safety
a) Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodied plugs and matching outlets
will reduce risk of electric shock.
b) Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges
and refrigerators. There is an increased risk
of electric shock if your body is earthed or
grounded.
c) Do not expose power tools to rain or wet
conditions. Water entering a power tool will
increase the risk of electric shock.
d) Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges
or moving parts. Damaged or entangled cords
increase the risk of electric shock.
e) When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of
a cord suitable for outdoor use reduces the risk
of electric shock.
f) If operating a power tool in a damp location
is unavoidable, use a residual current device
(RCD) protected supply. Use of an RCD reduces
the risk of electric shock.
3) Personal safety
a) Stay alert, watch what you are doing and use
common sense when operating a power tool.
Do not use a power tool while you are tired
or under the inuence of drugs, alcohol or
medication. A moment of inattention while
operating power tools may result in serious
personal injury.
b) Use personal protective equipment. Always
wear eye protection. Protective equipment
such as dust mask, non-skid safety shoes, hard
hat, or hearing protection used for appropriate
conditions will reduce personal injuries.
c) Prevent unintentional starting. Ensure the
switch is in the off-position before connecting
to power source and/or battery pack, picking up
or carrying the tool. Carrying power tools with
your nger on the switch or energising power
tools that have the switch on invites accidents.
d) Remove any adjusting key or wrench before
turning the power tool on. A wrench or a key left
attached to a rotating part of the power tool may

Product specificaties

Merk: Worx
Categorie: Boormachine
Model: WX130L.9

Heb je hulp nodig?

Als je hulp nodig hebt met Worx WX130L.9 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Boormachine Worx

Worx

Worx WX130L.9 Handleiding

25 Februari 2025
Worx

Worx WX956L Handleiding

3 December 2024
Worx

Worx WX394.91 Handleiding

5 Mei 2024
Worx

Worx WX370.1 Handleiding

4 Mei 2024
Worx

Worx WX352 Handleiding

4 Mei 2024
Worx

Worx WX272 Handleiding

4 Mei 2024
Worx

Worx WX394 Handleiding

4 Mei 2024
Worx

Worx WX381.9 Handleiding

4 Mei 2024
Worx

Worx WX177.9 Handleiding

4 Mei 2024
Worx

Worx WX381 Handleiding

4 Mei 2024

Handleiding Boormachine

Nieuwste handleidingen voor Boormachine

Bosch

Bosch GBH 18V-18 Professional Handleiding

5 Februari 2025
DeWalt

DeWalt DCD1624 Handleiding

2 Januari 2025
Makita

Makita DDF459 Handleiding

21 December 2024
Total

Total TRHLI1601 Handleiding

16 December 2024
Black Decker

Black Decker 1963 Handleiding

8 December 2024
Black Decker

Black Decker 1350-09 Handleiding

8 December 2024
Gude

Gude GTB 16/5 R Handleiding

8 December 2024
Hikoki

Hikoki DV36DA Handleiding

7 December 2024
Hikoki

Hikoki DH26PC2 Handleiding

7 December 2024
Hikoki

Hikoki DH28PCY2 Handleiding

7 December 2024