WilTec AS196A Handleiding
WilTec
Compressor
AS196A
Lees hieronder de 📖 handleiding in het Nederlandse voor WilTec AS196A (10 pagina's) in de categorie Compressor. Deze handleiding was nuttig voor 90 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/10
Instruction Manual
Airbrush Compressor AS196A
34207
Illustration similar, may vary depending on model
Please read and follow the operating instructions and safety information prior to initial operation.
Technical changes reserved!
Illustrations, functional steps, and technical data may deviate insignificantly due to continuous further
developments.
https://www.XPOtool.com Item 34207 Page 2
The Tool Experts
10 2022-1
The information contained in this document may alter at any time without prior notice. No part of this
document may be copied or otherwise duplicated without prior written consent. All rights reserved.
WilTec Wildanger Technik GmbH cannot be held liable for any possible mistakes in this operating man-
ual, nor in the diagrams and illustrations shown.
Although WilTec Wildanger Technik GmbH has made every possible effort to ensure that this operating
manual is complete, accurate, and up- -date, errors cannot be ruled out entirely.to
If you have found an error or wish to suggest an improvement, we look forward to hearing from you.
Send us an e-mail to:
service@wiltec.info
or use our contact form:
https://www.wiltec.de/contacts/
The most recent version of this manual in several languages can be found in our online shop:
https://www.wiltec.de/docsearch
Our postal address is:
WilTec Wildanger Technik GmbH
Königsbenden 12
52249 Eschweiler Germany
To return your goods for exchange, repair, or other purposes, please use the following address. Atten-
tion! To allow for a trouble-free complaint or return, it is important to contact our customer service team
before returning your goods.
Retourenabteilung
WilTec Wildanger Technik GmbH
Königsbenden 28
52249 Eschweiler Germany
E-mail: service@wiltec.info
Phone: +49 2403 55592–0
Fax: (+49 2403 55592–15)
https://www.XPOtool.com Item 34207 Page 3
The Tool Experts
10 2022-1
Introduction
Thank you for choosing to purchase this quality product. To minimise the risk of injury, we ask you to
always take some basic safety precautions when using this product. Please read this operating manual
carefully and make sure that you understand it.
Keep these operation instructions in a safe place.
Safety instructions
Caution!
• The use of this device is only allowed with a fault current protection switch with a triggering
nominal current up to (according to VDE 0100 Article 702 and 738).30 mA
• The device is not intended for use by persons (including children) with impaired or limited phys-
ical, sensory, and mental abilities or lack of experience and/or real knowledge, unless they are
supervised by a person responsible for their safety or follow the instructions made by this person
on how to correctly use the device.
• Children should be supervised to ensure that they do not play with the device.
Attention!
• The compressor head can become very hot. Burning hazard!
• Perform a visual inspection of the device before every use. Do not use the device if the safety
appliances are damaged or worn out. Never override safety regulations.
• Only use the device accordingly to the intended purpose stated in this manual.
• You are responsible for the safety of the working zone.
• If the cable or the plug is damaged due to external influences, the cable must not be repaired,
but must be replaced with a new one. This work can only be carried out by an electrician.
• The voltage of 230 V AC indicated on the nameplate of the device must match the existent
mains voltage.
• Never lift, transport, or suspend the device by its power cord.
• Make sure that the electrical plug connection is protected from flood and moisture.
• Before any maintenance work or adjustment, pull out the plug.
• The user is responsible for complying with local safety and mounting regulations. Ask an elec-
trician if you have questions.
• In case of device failure, repairs can only be carried out by an electrician.
Notes!
• Choose the right compressor with the appropriate air volume and air pressure to match the
actual work requirements.
• Never expose the device to dust, acid, steam, explosive or flammable gases, or weather influ-
ences (rain, sun, fog, snow).
• The vacuum pump can only be operated in an appropriate environment (good ventilation, am-
bient temperature +5 –+40 ℃ ℃).
• Never use the compressor barefoot or with wet hands or feet.
• Never allow children to touch the switched-on compressor or to insert the plug. It may cause
burns or electric shocks.
• Do not open or damage any part of the compressor. If necessary, contact a qualified person.
• By opening the drain valve, the water can be evacuated. Always release the water before not
using the compressor for a long time. Store the compressor in a well-ventilated place.
• Always wear protective goggles. Under no circumstances should you direct the airflow towards
your body or other persons’ bodies or animals.
• Never use the compressor in areas with vapours or humidity or near bodies of water.
• Switch off the compressor if you do not use it. Disconnect from mains before you repair, recon-
dition, maintain, clean, or replace parts. Never use the power cable as handle. Keep the cable
Product specificaties
| Merk: | WilTec |
| Categorie: | Compressor |
| Model: | AS196A |
Heb je hulp nodig?
Als je hulp nodig hebt met WilTec AS196A stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Compressor WilTec
17 Augustus 2023
17 Augustus 2023
17 Augustus 2023
17 Augustus 2023
17 Augustus 2023
17 Augustus 2023
16 Augustus 2023
16 Augustus 2023
Handleiding Compressor
- Compressor Bosch
- Compressor Xiaomi
- Compressor AEG
- Compressor DeWalt
- Compressor Airpress
- Compressor Bavaria
- Compressor Boss
- Compressor Danfoss
- Compressor Duro
- Compressor Duro Pro
- Compressor Einhell
- Compressor Emax
- Compressor Eufab
- Compressor Ferm
- Compressor Festool
- Compressor Global
- Compressor Gude
- Compressor Hikoki
- Compressor Hitachi
- Compressor Holzmann
- Compressor Hyundai
- Compressor Kibani
- Compressor Laica
- Compressor Livoo
- Compressor Makita
- Compressor Merlin
- Compressor Metabo
- Compressor Milwaukee
- Compressor Nilfisk
- Compressor Parkside
- Compressor Powerplus
- Compressor Robust
- Compressor Samson
- Compressor Scheppach
- Compressor Silvercrest
- Compressor Silverline
- Compressor Stanley
- Compressor Technaxx
- Compressor Toolcraft
- Compressor Topcraft
- Compressor Trotec
- Compressor Ultimate Speed
- Compressor Vonroc
- Compressor Westfalia
- Compressor Workzone
- Compressor Zipper
- Compressor OKAY
- Compressor Omnitronic
- Compressor Osram
- Compressor Ozito
- Compressor Black And Decker
- Compressor Steren
- Compressor Cocraft
- Compressor Draper
- Compressor Meec Tools
- Compressor Senco
- Compressor Hamron
- Compressor Aerotec
- Compressor Contimac
- Compressor HBM
- Compressor Power Craft
- Compressor Tacklife
- Compressor Truper
- Compressor Fieldmann
- Compressor Biltema
- Compressor Porter-Cable
- Compressor Sun Joe
- Compressor Dedra
- Compressor CMI
- Compressor Herkules
- Compressor Bimar
- Compressor MSW
- Compressor Sthor
- Compressor Craftsman
- Compressor Alphacool
- Compressor Freeman
- Compressor Pretul
- Compressor Hazet
- Compressor Full Boar
- Compressor Yato
- Compressor Avantco
- Compressor Auto Joe
- Compressor Unimac
- Compressor PreSonus
- Compressor Carel
- Compressor Outbac
- Compressor Golden Age Project
- Compressor Eventide
- Compressor Abac
- Compressor DBX
- Compressor SPL
- Compressor Lindell Audio
- Compressor Arebos
- Compressor POWERNAIL
- Compressor Anova
- Compressor Pansam
- Compressor Narvon
- Compressor Airman
- Compressor Pro-Lift
- Compressor Aomni
- Compressor Numax
- Compressor TOOLMATE
- Compressor California Air Tools
- Compressor Ilsco
- Compressor Hulk Power
- Compressor Cartrend
- Compressor Prowork
- Compressor Proviel
- Compressor Creemers
- Compressor ExelAir
- Compressor TJM
- Compressor TAURUS Titanium
Nieuwste handleidingen voor Compressor
14 November 2024
20 Oktober 2024
15 Oktober 2024
15 Oktober 2024
6 September 2024
6 September 2024
5 September 2024
5 September 2024
29 Augustus 2024
27 Augustus 2024