Wilson AG Pro 70 Handleiding

Wilson Signaalversterker TV AG Pro 70

Lees hieronder de 📖 handleiding in het Nederlandse voor Wilson AG Pro 70 (16 pagina's) in de categorie Signaalversterker TV. Deze handleiding was nuttig voor 2 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/16

Contents:

Antenna Options & Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Quick Install Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Installation Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Before Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Installing the Outside Antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Finding the Strongest Signal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Installing the Inside Antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Installing a Wilson Electronics Signal Booster . . . . . . . . . . . . . . . . 9

Powering up a Wilson Electronics Signal Booster . . . . . . . . . . . . 9

Understanding the Signal Booster Lights . . . . . . . . . . . . . . . . 10

Warnings and Recommendations . . . . . . . . . . . . . . . . . . . . 13

Guarantee & Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . Back Cover

Note: This manual contains important safety and operating

information. Please read and follow the instructions in this

manual. Failure to do so could be hazardous and result in

damage to your Signal Booster.

Adjustable Gain

Signal Boosters

AG Pro 75™, AG Pro 70™, AG Pro Installer™,

AG SOHO 65™, AG SOHO 60™

(SOHO: Small Office, Home Office)

In-Building Wireless 800/1900 MHz

Smart Technology ™

Appearance of device and accessories may vary.

1Contact Wilson Electronics Technical Support Team with any questions at 866-294-1660

or email: tech@wilsonelectronics.com. Mon.- Fri. Hours: 7 am to 6 pm MST.

Installation Instructions for the Following

Wilson Electronics Signal Boosters:

AG Pro 75™, AG Pro 70™, AG Pro Installer™& AG SOHO 65™

AG SOHO 60™ In-Building Wireless 800/1900 MHz

Smart Technology ™ Signal Boosters

Model # 271265

FCC ID: PWO271265 IC: 4726A-271265

The term “IC” before the radio certification number only signifies that Industry Canada

technical specifications were met.

How it Works

Wilson Electronics Signal Boosters are bi-directional devices that deliver

service levels consistent with what would be expected in areas of high cell

network coverage. They amplify a weak or shadowed signal in mobile,

marine and in-building applications. When using a Wilson Electronics

Signal Booster in conjunction with Wilson Electronics antennas, the

Outside Antenna will collect the cell tower signal and send it through

the cable to the Signal Booster. The signal is then amplified and re-

transmitted through the Inside Antenna into the room. Cell phones and

cellular data cards in that area then communicate with the improved

signal. When a cell phone or cellular device transmits, the signal is

received by the Inside Antenna, amplified by the Signal Booster and

transmitted back to the cell tower through the Outside Antenna.

Inside this Package

Signal

Booster

AC/DC

Power

Supply

To purchase, call Wilson Electronics Sales Department at: 800-204-4104

Outdoor Antenna Options

Indoor Antenna Options & Accessories

1. 1900 MHz Yagi PCS Antenna (301124)

2. 800 MHz Yagi Cellular Antenna (301129)

3. Wide Band Directional Antenna 700 MHz -

2700 MHz (304411)

A. Wide-Band Panel Antenna 700-2700MHz (301155)

B. 50 Ohm Lightning Surge Protector N-Connector (859902)

C. 75 Ohm Lightning Surge Protector F-Connector (859988)

Splitter options on page 8

12BC

(The AG Pro Installer

has a different knob

conguration)

Note: Kits may contain different accessories

N Female - FME

Female Adapter

(Sold with the

AG SOHO 60)

Appearance of device and accessories may vary.

Contact Wilson Electronics Technical Support Team with any questions at 866-294-1660

or email: tech@wilsonelectronics.com. Mon.- Fri. Hours: 7 am to 6 pm MST.

Select a location to install the Signal Booster that is away from excessive 1.

heat, direct sunlight, moisture and has proper ventilation. Do not place the

Signal Booster in an air-tight enclosure.

Select a location on the roof of the building to install the Outside Antenna. 2.

Use a cell phone in test mode to find the strongest signal from the cell

tower (see page 6). Visit

www.WilsonElectronics.com

to find test mode

function for your particular cell phone.

Run the Outside Antenna cable to the Signal Booster and attach it to 3.

the connector labeled “Outside Antenna” on the Signal Booster. Run the

Inside Antenna cable to the Signal Booster and attach it to the connector

labeled “Inside Antenna” on the Signal Booster.

For more information on

running cable

(see page 7). Lightning Surge Protection is recommended

for all in-building installations (see page 6).

Select a location for the Inside Antenna, preferably in the center of 4.

where the signal needs to be amplified. A minimum separation distance

of 20 vertical (within the null zone) or 50 horizontal feet is necessary

for proper operation. If the inside coverage is not sufficient you may

need to increase the separation distance even further (see installation

diagram on pages 3 & 4).

Before powering up the Signal Booster, verify that both the Outside 5.

Antenna and the Inside Antenna are connected and check that all

connections are tight. Note: Be careful when plugging the connectors

in so as not to bend the center pins on the connectors (

see page 9).

The Signal Booster has been packaged with the gain control knobs 6.

adjusted to the highest gain position. If one or both of the lights are not

green, please refer to pages 10-12. For AG Pro Installer (see page 12).

Quick Install Overview

See Installation Diagram on page 3. Contact Wilson Electronics Technical

Support Team with any questions at 866-294-1660.

Warning: Connecting the Signal Booster directly to a cell phone with

use of an adapter will damage the cell phone and/or the

Signal Booster.

IMPORTANT NOTICE

It is very important to power your Signal Booster •

using a surge protected AC Power Strip with at

least a 1000 Joule rating.

Failure to do this will void your warranty in the •

event of a power surge or lightning strike.

Product specificaties

Merk:	Wilson
Categorie:	Signaalversterker TV
Model:	AG Pro 70
Kleur van het product:	Blauw
Gewicht:	220 g
Ingangsspanning:	110 - 240 V
Frequentie:	50 - 60 Hz
Aansluiting(en):	F-Female
Afmetingen (B x D x H):	140 x 108 x 39 mm
Stroomverbruik (typisch):	8 W
Frequentie bereik (voorwaartse pad):	824 - 894 MHz
Frequentie bereik (achterwaartse pad):	1850 - 1990 MHz
Winst (voorwaartse pad):	65 dB
Geluid figuur:	3.5 dB
Winst (achterwaartse pad):	70 dB