Viking W-2000A-EWP Handleiding

Viking Intercomsysteem W-2000A-EWP

Lees hieronder de 📖 handleiding in het Nederlandse voor Viking W-2000A-EWP (4 pagina's) in de categorie Intercomsysteem. Deze handleiding was nuttig voor 15 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/4

PRODUCT MANUAL

Designed, Manufactured and Supported in the USA

C O M M U N I C AT I O N & S E C U R I T Y S O L U T I O N S

Answer Your Door or Gate from the Safety of

Any Phone in Your Home or Business

Features

The W-Series handsfree doorboxes are available in

three different chassis configurations. The W-1000

has an aluminum faceplate with black textured powder

paint and call progress LED. The W-2000A provides

a surface mount light grey UV stable plastic chassis.

The W-3000 provides an attractive vandal resistant

stainless steel faceplate and call progress LED. The

W-Series are designed to interface directly with an

unused analog telephone line input of phone system.

One or two doorboxes can also share an existing

phone line when used with a doorboxC-1000B

controller.

When the “ “ button is pressed, the doorboxCall

generates a standard or custom ring cadence of an

adjustable number of rings. For noisy environments,

the doorbox’s new louder speaker output and

“Push-to-Talk” feature can be used.

The EWP versions share all of the features of the

standard W-Series in addition to Enhanced Weather

Protection (EWP) for outdoor installations where the

unit is exposed to precipitation or condensation. EWP

products feature foam rubber gaskets and boots,

sealed connections, gel-filled butt connectors, as well

as urethane or thermal plastic potted circuit boards

with internally sealed, field-adjustable trim pots and

DIP switches for easy on-site programming. For more

information, see .DOD 859

• W-1000 Faceplate: Vandal resistant 12 gauge

louvered aluminum with weather resistant black

textured powder paint and UV stable white silk

screened graphics.

• W-2000A Chassis: Impact resistant, UV stable, light

grey Geloy plastic with black UV stable pad printed

graphics. Surface mount only.

• W-3000 Faceplate: Vandal resistant 14 gauge

louvered 316 marine grade stainless steel with #4

brushed finish and permanent laser etched graphics.

• Connect to a phone system’s unused trunk input, FXO

port or a Viking ControllerC-1000B

• Marine grade 316Weather Resistant Features:

stainless steel screws and push button switch

(W-1000/W-3000). Switch internally sealed per IP67.

Mylar speaker. Self-draining mic mount. Faceplate,

mic and speaker gaskets.

• Blue call progress / night light LED (W-1000/W-3000)

• High output speaker amplifier with volume adjustment

• Microphone volume adjustment POT

• 40 volt talk battery

• 20 Hz ring generator (6.0 REN ring load maximum)

• Selectable ring cadence (standard, double,

short/short/long, or short/long/short)

• Selectable number of rings (2, 3, 10 or 30)

• Selectable “Push-to-Talk” feature for noisy

environments

• Operating temperature range: -15°F to 130°F

• EWP versions are designed to meet IP66 Ingress

Protection Rating (see for more info)DOD 859

• Ideal for noisy locations in “Push-to-Talk” mode

• Commercial, industrial or residential door security

• Door or gate communication

• Truck stop/gas station fuel island communication

• Use with the controller for single lineC-1000B

residential systems or when the operation of door

strikes or gate openers is necessary (see )DOD 155

Power: 120V AC/13.8V AC 1.25A UL listed adapter provided

W-1000/W-3000 Dimensions: Overall - 5.0” x 5.0” x 2.25”

(127mm x 127mm x 57.2mm) Plastic Rough-In Box - 4.0” x

4.0” x 2.12” (102mm x 102mm x 54mm)

W-2000A Dimensions: 5.5” x 4.5” x 1.7” (140mm x 115mm x

43mm)

Shipping Weight: 4 lbs (1.81 Kg)

Operating Temperature: -15°F to 130°F (-26°C to 54°C)

Humidity - Standard Products: 5% to 95% non-condensing

Humidity - EWP Products: Up to 100%

Ringer Output: 20 Hz, 6.0 REN load maximum

Maximum Line Loop Length with 24 AWG Twisted Pair:

6300 ft (1.9 Km)

Maximum Power Run Length with CAT5 Wire: 1 pair =

150ft, 2 pair = 300ft, 3 pair = 450ft Note: Power run length

may be increased, see sectionWiring

Connections: (4) gel filled butt connectors

W-Series

Vandal Resistant

Handsfree Doorboxes

January 4, 2019

Applications

Specifications

www.VikingElectronics.com

Information: 715-386-8861

VIKING

W-1000/

W-1000-EWP

Flush Mount

Black Powder

Painted Aluminum

W-2000A/

W-2000A-EWP

Surface Mount Light

Grey UV Stable

Plastic Chassis

W-3000/

W-3000-EWP

Flush Mount

Brushed 316

Stainless Steel

Installation

IMPORTANT: Electronic devices are susceptible to lightning and power station electrical surges from both the AC

outlet and the telephone line. It is recommended that a surge protector be installed to protect against such surges.

Caution: When warm air comes in contact with cold surfaces, such as outside walls, it causes condensation. To

help prevent condensation from accumulating inside the , bring conduit into the bottom of the unit.W-1000/3000

If this is not possible, drill a 1/4” diameter hole in the bottom of the plastic rough-in box.

A. Mounting the W-1000 and W-3000

Front View of Optional

VE-5x5 Surface Mount

Box (not included)

2.25”

Condensation

Drain Hole

5.14”

5.22” 3.25”

Call

4.0"

Rear View of VE-5x5

(not included)

5.0” Typical W-3000-EWP

shown with

optional

Viking Model

VE-5X5

Surface

Mount Box

and

VE-GNP

Gooseneck

Pedestal

(4) 0.38” diameter (for gooseneck mounting)

(4) 0.2 x 0.43 slots for double gang box

(2) 0.2 x 0.43 slots for single gang box

(1) 0.74"

diameter

3.0” 3.3”

3.0”

2.1”

Wall Stud

*Included Plastic

Rough-In Box

(part # 259576)

Wire

knock-out

Push to Call Button

Blue Call Progress/Nightlight LED

(4) 6-32 X 3/4” Marine grade 316 stainless

steel, flat head, T-10 Torx head security

screws and drive bit (included)

Condensation Drain Hole

* Note: www.vikingelectronics.comThe plastic rough-in box (part # 259576) may be purchased separately in advance. Go to

and click on “spare parts”. Note that (1) plastic rough-in box comes with the unit.

The optional Surface Mount Box is VE-5x5

designed to be surface mounted to a single

gang box, double gang box or VE-GNP

gooseneck pedestal (right). For more

information on the and see VE-5x5 VE-GNP

DOD# 424.

1/8" thick foam gasket (included): Peel off paper

liner and adhere gasket to the back of the faceplate,

centering it over the four corner mounting holes.

Marine grade 316 stainless

steel faceplate (W-3000 only)

Marine grade 316 stainless

steel push button switch

(sealed per IP67)

Important: The

W-1000 W-3000 or

will mount to NOT

a standard double

gang box.

(2) Standard flat head

dry wall (sheet rock)

screws (not included)

Optional VE-5x5 Surface

Mount Box (not included)

3.40”

3.30”2.35”3.40”

1.55”

Mount the back panel to a

wall, a single gang box or

a 4” x 4” junction box with

the arrow pointing up.

Attach the cover to the

base with the two included

screws as shown.

Internal View of the back panel

W-2000A / W-2000A-EWP

Side View of the

W-2000A / W-2000A-EWP

Rear View of the

W-2000A / W-2000A-EWP

Mounting Specifications

B. Mounting the W-2000A

The and W-2000A W-2000A-EWP are designed to be surface mounted to a single gang box (not included), a

standard 4” x 4” electrical junction box (not included), or directly to a wall or flat sided post.

Note: For outdoor applications apply a bead of caulk between back panel and wall.

Programming

Switch 1 Switch 2 Ring Cadence

OFF OFF Standard: 1 sec on, 3 secs off (default)

ON OFF Double: 1 sec on, 0.5 sec off, 1 sec on, 3.5 sec off

OFF ON Short/Short/Long: 0.5 sec on, 0.5 sec off, 0.5 sec on, 0.5 off, 1 sec on, 3 secs off

ON ON Short/Long/Short: 0.5 sec on, 0.5 sec off, 1 sec on, 0.5 sec off, 0.5 sec on, 3 secs off

1 2 3

1 2

S1 DIP Switches

S2 DIP Switches

OFF

O N

1 2 3

O N

1 2

EART H

GND O UT TO

PH O N E KEYLESS

C.C . INP UT DO O R

BO X 1 D O O RB O X

13VAC P WR DO O R

BO X 2 N .O. CO M N. C.

DO OR S TR IKE 1

SI G GND

VID EO 1 IN S IG GND

VID EO 2 IN S IG GND

VID EO OU T

N.O . CO M N. C.

DO OR S TR IKE 2

T ALK BAT TER Y

OFF ON

LED1

LED2

LED3

1 2 3

CO M N. O. N.C . - - - - AUX.

CO N T ACT

OU T P U T

VIKING ©

VIKING

ELE CT RONIC S

HUDSO N, WI 54016

DOOR ENTRY / CCTV VIDEO

CONTROLLER

POW ER 13.8V AC

MODEL C-1000B

PHO NE LINE

INPUT

EARTH

GN D

21 3 4 5 14 15 16

LINE O UTT O PHO NES

6 7

KEYLESS CO NTAC T

CLO SURE INPUT

DO ORBOX 1

DO ORBOX 2

8 9 10 11

DO ORBO X

PWR O UT PUT

12 13

DO ORST RIKE 1

N.O .

CO M

N.C .

17 18 19

DO OR

ST RIKE 2

N.O .

CO M

N.C .

.O . LI E

INP U T

1 2 3

1 2

Unused

PABX/KSU

Trunk Input

3.63" Typical

3.63"

** Earth

Ground

(optional)

(Spade

connector

included)

Multi-Line

Phone

C.O.

Line

To 2nd

Doorbox

C-1000B Controller

Rear View of W-1000 / W-3000

Single Line

Phone

* Gel-Filled Butt

Connectors

*** 13.8VAC

(18VAC max)

** Earth

Ground

(optional)

(Spade

connector

included)

1 2 3

1 2

Rear View of W-2000A

120V AC

Wire as

shown below

Wire as

shown

below

Red/Black

Black/Red

Wires from

W-1000 / W-2000A / W-3000

Green (Tip)

Red (Ring)

C. Wiring CAUTION:

Do install aNOT

W-1000,W-2000A

or W-3000 on a

telephone line

without a C-1000B

Controller

(see ).DOD 155

* Note: The gel-filled (water-tight) butt connectors are

designed for insulation displacement on 19-26 guage wire

with a maximum insulation of 0.082 inches. Cut off

stripped wire ends prior to terminating.

** Note: To increase surge protection, loosen the PCB mounting screw labeled (as shown above) and fasten

a wire with spade terminal (included) from the mounting screw to Earth Ground (grounding rod, water pipe, etc.)

*** Warning: The power run wire length is limited to 150 ft of CAT5 wire. Longer power runs will require heavier

gauge wire (doubling or tripling pairs) and/or a higher voltage power adapter. Voltage at the doorbox power input

connections must not exceed 18VAC RMS.

A. DIP Switches

S2 DIP Switch Settings

Switch 1 Switch 2 Ring Output

OFF OFF 2 rings

ON OFF 3 rings

OFF ON 10 rings (default)

ON ON 30 rings

S1 DIP Switch Settings

Switch 3 Communication Mode

OFF Normal Handsfree Mode (default)

ON Push-To-Talk Mode

Note: All switches shown in factory default settings.

B. Handsfree Operation (S1 Dip Switch 3 - OFF)

When the “ ” button is pressed, the call progress LED (on Call W-1000/W-3000 W-Seriesonly) will turn off and the

Doorbox will begin generating a 20 Hz ring signal. The caller at the will hear an audio ring back signalDoorbox

while the LED flashes. When the inside party has answered, the LED will light until the inside party hangs up. At

that point, the LED will turn off for approximately one second and then light steady to illuminate the W-1000/W-

3000 after dark.

C. Push-To-Talk Operation (S1 Dip Switch 3 - ON)

In extremely noisy locations, the “Push-to-Talk” mode should be used. To switch to the “Push-to-Talk” mode, place

DIP switch 3 in the position (see ). To initiate a call, momentarily press the “ ”ON Dip Switch Programming Call

button to generate the ring signal. After the inside party has answered, press and hold the call button to talk.

Release the call button to listen. 3

Product specificaties

Merk:	Viking
Categorie:	Intercomsysteem
Model:	W-2000A-EWP
Kleur van het product:	Wit
Breedte:	140 mm
Diepte:	43 mm
Hoogte:	115 mm
Gewicht verpakking:	1810 g
Internationale veiligheidscode (IP):	IP66
Plaatsing:	Muur
Certificering:	EWP\nIP66
Aantal knoppen:	1
Gemakkelijk te installeren:	Ja
Bedrijfstemperatuur (T-T):	-26 - 54 °C