Viking K-1900-712L-IP Handleiding

Viking Intercomsysteem K-1900-712L-IP

Lees hieronder de 📖 handleiding in het Nederlandse voor Viking K-1900-712L-IP (21 pagina's) in de categorie Intercomsysteem. Deze handleiding was nuttig voor 16 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/21

Applications

The K-1900-7-IP Series VoIP Panel Phones will auto-dial a 1-20 digit programmable phone

number each time the handset is lifted. If the call is not answered, the phone will dial up to 3

additional phone numbers. The phones are designed to provide quick andK-1900-7-IP Series

reliable communication for SIP VoIP phone systems with PoE. The unit can be programmed

from any PC on the same LAN or remotely using a Static IP Address.

When a call initiated by the phone is answered by an apartment orK-1900-7-IP Series

business tenant, a built-in relay may be activated to control an electric gate or door strike. The

relay can also be programmed to activate whenever the phone is off hook, ideal for controlling

cameras, etc.

The K-1900-712L-IP and K-1900712LIPEWP features a 12” long armored cable with internal

stainless steel lanyard for additional cable strength.

The andK-1900-7-IP-EWP K-1900712LIPEWP share all the features of the standard

K- -7-1900 IP and K-1900-712L-IP in addition to Enhanced Weather Protection (EWP) for

outdoor installations where the unit is exposed to precipitation or condensation. EWP products

are designed to meet IP66 standards and may feature foam rubber gaskets, sealed

connections, gel-filled butt connectors, as well as potted circuit boards with internally sealed,

field-adjustable trim pots and DIP switches for easy on-site programming. For more information

on EWP, see .DOD 859

• Commercial or Residential

Door / Gate Entrance

• Kiosk Phone

• Apartment Entry Phone

• Door Entry Phone

• Courtesy Assistance Phone

• Customer Service Phone

• Automated Teller (ATM) Phone

• Security or Emergency Phone

• Hot-Line Phone

• Prison Phone

Vandal Resistant VoIP Panel Phones

with Auto Dialer and Relay Control

Features

Installation requires a Network Administrator / IT Technician

Specifications

www.VikingElectronics.com

Information: 715-386-8861

• Vandal Resistant Features: 12 gauge (0.105” thick) 316 stainless steel front

panel with permanent laser etched graphics. Heavy duty metal hook switch,

armored cable and T-10 Security Torx drive mounting screws.

• Marine grade 316 stainless steel faceplate Weather Resistant Features:

and Torx Security screws. Faceplate, ear piece, and mouth piece gaskets (on

EWP models).

• Ring with adjustable volume and cadence

• Hearing aid compatible amplified handset with sealed push button volume

control

• SPDT 2 Amp relay contacts for door/gate or camera control

• Optional for Secure Remote Relay Control, see RC-4A DOD 582

• SIP compliant (see page 2 for compatible SIP servers and IP phone systems)

• PoE powered (class 1, <4 Watts)

• Outbound Proxy, Authentication ID, Peer to Peer, VLAN Tagging

• Network downloadable firmware

• and : 12” armored handset cableK-1900-712L-IP K-1900712LIPEWP

• : 36” armored handset cable K-1900-7-IP

• : 54” armored handset cable K-1900-7-IP-EWP

• Cycles to up to three rollover phone numbers on busy or no-answer

• Optional Enhanced Weather Protection (EWP) available - EWP products are

designed to meet IP66 Ingress Protection Rating, see DOD 859

• Remotely programmable

• Extended temperature range (-40°F to 140°F)

• Selectable auto-answer feature for monitoring

• Flush mount using a standard double-gang box (not included)

• Surface mount using an optional surface mount box (not included, VE-5x10

see ) DOD 424

• Optional kit to illuminate the front panel at night, see VE-LIGHT DOD 428

• Diagnostics (for testing relay)

For complete , see page 2.Specifications

K-1900-7-IP-EWP

with 54” armored

cable

K-1900-7-IP

with 36”

armored cable

K-1900-712L-IP/

K-1900712LIPEWP

with 12” armored

cable and lanyard

PRODUCT

MANUAL

Designed, Manufactured and Supported in the USA K-1900-7-IP Series

VoIP Panel Phone with

Auto Dialer and Relay Control

September 28, 2021

SECURITY & COMMUNICATION

VIKING

VoIP SIP System Compatibility

For compatibility and vendor specific detailed configuration instructions, see the Viking VoIP

SIP System Compatibility List, DOD 944. To open and download this PDF file:

1. Go to www.vikingelectronics.com

and enter in the search box 944

2. Click Application Note (DOD 944)

to open and download the PDF

Scan the QR code below to open

and download the Viking VoIP

SIP System Compatibility List - OR -

Important: Exclusion from this list means only that compatibility has not been verified, it does not mean

incompatibility. If you have questions, please call Viking Electronics at 715-386-8861.

Power: PoE class 1 (<4 Watts)

Standard Dimensions: 5.0” x 10.0” x 4.97” (127mm x 254mm x 126mm)

EWP Dimensions: 5.0” x 10.0” x 5.1” (127mm x 254mm x 130mm)

Shipping Weight for K-1900-712L-IP/EWP: 3.7 lbs (1.7 kg)

Shipping Weight for K-1900-7-IP/EWP: 3.8 lbs (1.72 kg)

Operating Temperature: -40°F to 140°F (-40° C to 60° C)

Humidity - Standard Products: 5% to 95% non-condensing

Humidity - EWP Products: Up to 100%

Handset Cable Length on K-1900-712L-IP and K-1900712LIPEWP Models: 12” to 12.7” (31cm to 33 cm)

Handset Cable Length on K-1900-7-IP Model: 34” to 37” (86 cm to 94 cm)

Handset Cable Length on K-1900-7-IP-EWP Model: 52” to 57” (132 cm to 145 cm)

Audio Codecs: G711u, G711a, G722

Network Compliance:

IEEE 802.3 af PoE, SIP 2.0 RFC3261, 100BASE-TX with auto cross over

Regulatory Compliance: CE, FCC Part 15 and Canada ICES-003 Class A

Connections: (1) RJ45 10/100 Base-T, (3) gel-filled butt connectors

Specifications

Definitions

Client: A computer or device that makes use of a server. As an example, the client might request a particular file from the server.

DHCP: Dynamic Host Configuration Protocol. In this procedure the network server or router takes note of a client’s MAC address and

assigns an IP address to allow the client to communicate with other devices on the network.

DNS Server: A DNS (Domain Name System) server translates domain names (ie: www.vikingelectronics.com) into an IP address.

Ethernet: Ethernet is the most commonly used technology. An Ethernet Local Area Network typically uses twisted pair wires toLAN

achieve transmission speeds up to 1Gbps.

Host: A computer or device connected to a network.

Host Name: A host name is a label assigned to a device connected to a computer network that is used to identify the device in various

forms of network communication.

Hosts File: A file stored in a computer that lists host names and their corresponding IP addresses with the purpose of mapping addresses

to hosts or vice versa.

Internet: A worldwide system of computer networks running on protocol which can be accessed by individual computers or networks.IP

IP: Internet Protocol is the set of communications conventions that govern the way computers communicate on networks and on the

Internet.

IP Address: This is the address that uniquely identifies a host on a network.

LAN: Local Area Network. A LAN is a network connecting computers and other devices within an office or building.

Lease: The amount of time a DHCP server reserves an address it has assigned. If the address isn’t used by the host for a period of

time, the lease can expire and the address can be assigned to another host.

MAC Address: MAC stands for Media Access Control. A MAC address, also called a hardware address or physical address, is a unique

address assigned to a device at the factory. It resides in the device’s memory and is used by routers to send network traffic to the correct

IP address. You can find the MAC address of your K-1900-7-IP Series phone printed on a white label on the top surface of the PoE LAN

port.

Router: A device that forwards data from one network to another. In order to send information to the right location, routers look at IP

Address, and Subnet Mask. MAC Address

RTP: Real-Time Transport Protocol is an Internet protocol standard that specifies a way for programs to manage the real-time transmission

of multimedia data over either unicast or multicast network services.

Server: A computer or device that fulfills requests from a client. This could involve the server sending a particular file requested by the

client.

Session Initiation Protocol (SIP): Is a signaling communications protocol, widely used for controlling multimedia communication sessions

such as voice and video calls over Internet Protocol ( ) networks. The protocol defines the messages that are sent between endpoints,IP

which govern establishment, termination and other essential elements of a call.

Static IP Address: A static IP Address has been assigned manually and is permanent until it is manually removed. It is not subject to the

Lease limitations of a Dynamic IP Address assigned by the DHCP Server. The default static IP Address is: 192.168.154.1

Subnet: A portion of a network that shares a common address component. On TCP/IP networks, subnets are defined as all devices

whose IP addresses have the same prefix. For example, all devices with IP addresses that start with 100.100.100. would be part of the

same subnet. Dividing a network into subnets is useful for both security and performance reasons. IP networks are divided using a subnet

mask.

TCP/IP: Transmission Control Protocol/Internet Protocol is the suite of communications protocols used to connect hosts on the Internet.

TCP/IP uses several protocols, the two main ones being TCP and IP. TCP/IP is built into the UNIX operating system and is used by the

Internet, making it the de facto standard for transmitting data over networks.

TISP: Telephone Internet Service Provider

WAN: Wide Area Network. A WAN is a network comprising a large geographical area like a state or country. The largest WAN is the

Internet.

Wireless Access Point (AP): A device that allows wireless devices to connect to a wired network using Wi-Fi, or related standards. The

AP usually connects to a router (via a wired network) as a standalone device, but it can also be an integral component of the router itself.

Wireless Repeater (Wireless Range Extender): takes an existing signal from a wireless router or access point and rebroadcasts it to

create a second network. When two or more hosts have to be connected with one another over the IEEE 802.11 protocol and the distance

is too long for a direct connection to be established, a wireless repeater is used to bridge the gap.

Product specificaties

Merk:	Viking
Categorie:	Intercomsysteem
Model:	K-1900-712L-IP
Kleur van het product:	Black, Stainless steel
Breedte:	127 mm
Diepte:	126 mm
Hoogte:	254 mm
Snoerlengte:	0.3 m
Gewicht verpakking:	1700 g
Materiaal behuizing:	Roestvrijstaal
Plaatsing:	Muur
Connectiviteitstechnologie:	Bedraad
Aantal luidsprekers:	1
Certificering:	CE\nCanada ICES\nFCC Part 15\nSIP
Netwerkstandaard:	IEEE 802.3af
Power over Ethernet (PoE):	Ja
Gemakkelijk te installeren:	Ja
Bedrijfstemperatuur (T-T):	-34 - 60 °C
Aansluiting type:	RJ-45