Vemer Energy-230 Wi-Fi Handleiding

Vemer Meetapparatuur Energy-230 Wi-Fi

Lees hieronder de 📖 handleiding in het Nederlandse voor Vemer Energy-230 Wi-Fi (2 pagina's) in de categorie Meetapparatuur. Deze handleiding was nuttig voor 16 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/2

03-2024

REFERENCE STANDARDS

EU CONFORMITY DECLARATION

Vemer declares that the device complies with the Communitary Directive 2014/53/EU

(RED) with reference to the following standards:

• EN 61010-1 • EN 50470-1 • EN 50470-3 • EN 300 328 • EN 301 489-1

• EN 301 489-17

The full text of the EU Conformity Declaration is available at www.vemer.it address.

V3IS01181-010

Mod. Energy-230 Wi-Fi

Manuals

download

PDF

2INSTRUMENT DESCRIPTION and DIMENSIONS

User Manual

SINGLE-PHASE ACTIVE ENERGY METER WITH WI-FI MODULE

Read all the instructions carefully

Energy meter from DIN bar designed to measure the consumption of active energy into

the grid in single-phase systems. The current insertion is direct for values up to 40A.

The integrated Wi-Fi module is used to manage the device remotely using your smartphone

or tablet. You need to connect the device to your home router and install the dedicated App

on your smartphone or tablet, available free of charge for Android and iOS devices.

On the application it is possible to view the measurements of total energy, partial

energy and instantaneous power. It has a pulse output for remote energy counting.

Energy-230 Wi-Fi is an electronic device intended to operate in environments with overvoltage

category III and pollution degree 2 according to the EN 61010-1 standard.

Code Model Description

VE794600 Energy-230 Wi-Fi

Single-phase active energy meter with Wi-Fi interface

SAFETY WARNINGS

During product installation and operation it is necessary to observe the following

instructions:

1) The product must be installed by a qualified person, strictly in observance of the

connection diagrams shown in this manual.

2) The product must be installed and activated in compliance with current electric

systems standards

3) After installation inaccessibility to the terminals without using dedicated tools

must be guaranteed

4) Do not use the product for anything other than the indicated purpose.

5) The product must be installed in an adequately protected closed electrical panel.

6) In the supply network there must be a bipolar disconnection.

7) In the electrical system upstream of the product must be installed a protection

device against the overcurrents.

8) Before accessing the connection terminals, make sure that the leads are not live.

9) Do not connect or feed the product if any part of it is damaged.

10) The product can be used in environments with Measurement Category III

and Pollution degree 2, according to the Standard EN 61010-1.

TECHNICAL SPECIFICATIONS

• Power supply: 230 Vac (-15% ÷ 10%) 50/60 Hz

• Absorption: 4.7 VA (1.5 W)

• Starting current: Ist = 20 mA

• Minimum current: Imin = 0.25 A

• Reference current: Iref = 5 A

• Maximum current: Imax = 40 A

• Insertion type: direct

• Pulse output for remote reading of the collected energy count:

- 200 imp/kWh

- Pulse duration 100 ms ±15%

- Pulse voltage 9 ÷ 24 VDC ± 10%

- Switchable output current 20 mA Max

• Cable terminal block with a maximum section of 6 mm

• Communication interface: Wi-Fi and Bluetooth BLE 5.0

• Operating frequency band:

- Wi-Fi: 2.4 GHz IEEE 802.11 b/g/n

- Bluetooth: 2400-2483.5 MHz

• Maximum transmitted radiofrequency power:

- Wi-Fi: 18.3 dBm

- Bluetooth: 4 dBm

• LED: 3 operation status signal LEDs

• Precision: Class B

• Keypad: 1 key for configuration

• Operating temperature: -10°C ÷ 45°C

• Operating humidity: 20 ÷ 90% non-condensing

• Storage temperature: -25°C ÷ 70°C

• Insulation: reinforced between accessible parts (front) and all the other clamps

• Container: 2 DIN modules

• Degree of protection: IP20/IP51 on the front

• Create a Vemer account:

1. Install and launch the App on your Energy Wi-Fi

smartphone (or tablet)

2. Choose and fill in the "e-mail" and"REGISTER NOW"

"password" fields

Note: for security reasons, it is advisable to choose a

password different from the one used to access your

e-mail inbox

3. Check your e-mail address: confirm account activation

by clicking on the link contained in the e-mail sent by the

system

4. Log in by entering the e-mails and passwords chosen

during registration

To configure the device using a smartphone

proceed as follows:

1. Verify that the phone you are using is connected

to the home Wi-Fi network where the device

will be connected.

2. Launch the and press the on App "+" button

the Home page.

3. On the Energy Wi-Fi, hold down the SET key

until the starts to flash quickly yellow LED ( )

to activate configuration mode. Now wait for the

yellow LED ( ) to start flashing slowly before

proceeding.

4. On the App:

a. follow the instructions in the wizard and press

"Next".

b. find and select in the list the device "EW_..."

to connect to the Energy Wi-Fi (the yellow

LED ( ) will come on fixed to indicate the

connection between the App and the device).

c. now enter the full name (SSID) and password of the Wi-Fi network to which the

device is connected, being sure to faithfully type in all the component characters

(upper-case, lower-case, spaces, digits).

Press to proceed. Continue

5. On the enter a name that helps identify the and confirm App Energy Wi-Fi

by pressing the Save

6. On the , check that the Energy Wi-Fi green LED ( ) starts flashing and after

a short while becomes fixed to indicate correct connection with the home network.

The configuration procedure has ended. At this point:

the displays the list of devices associated with your account which must also App

include the newly associated device

on the the Energy Wi-Fi green LED ( ) will be on fixed

7LED SIGNALS

The 3 LEDs on the device, based on the types of ignition described in the table, help to understand the operating status of the device:

LED Ignition type Operating status

GREEN ( )

Fixed on Normal operation

Slow  ashing Attempting to connect to the Wi-Fi network (during the remote control con guration phase)

Single  ashing Incorrect Wi-Fi password entered

Double  ashing No Wi-Fi connection or incorrect Wi-Fi network name entered

Triple  ashing Generic Wi-Fi connection error

Quadruple  ashing No Internet connection

Short shutdown Time absence

YELLOW ( )

Fixed on Power produced (during normal operation of the device)

Fixed on Connection with smartphone successful (during the remote control con guration phase)

Fast  ashing Preparation of BLE mode for remote control con guration

Slow  ashing BLE mode active for remote control con guration

RED ( ) Flashing Energy absorbed (each  ash indicates an increase in the energy meter of 10 Wh)

GREEN ( ) + YELLOW ( )

Simultaneous short ignition No network con guration

Simultaneous  xed access Starting and/or resetting of the device

Simultaneous fast  ashing Keypad lock enabled (displayed when the key is pressed)

Alternate Device identi cation (displayed with application command)

GREEN + RED( ) + YELLOW ( ) ( ) Simultaneous slow  ashing Internal memory error

(Max 40 A)

User / Load

Pulse output

5 Wh/Imp

3CONNECTION DIAGRAM

5PRELIMINARY OPERATIONS 6CONFIGURATION REMOTE CONTROL

WARNINGS

Use of the energy meter via the Energy Wi-Fi App must be performed

in the presence of a 2.4 GHz Wi-Fi network connected to the Internet.

The smartphone used for configuration must be connected to the same Wi-Fi network.

Make sure you have a Vemer account.

Also ensure that the distance from the router is such as

to ensure stable communication.

4WARNINGS FOR THE CORRECT POSITIONING AND

CONNECTION OF THE DEVICE TO A WI-FI NETWORK

For the correct operation and use of the device through the remote control via the App,

carefully follow the points below:

• Install and connect the device according to the connection diagrams in this manual.

• Check that:

1. the Router and/or the Wi-Fi Access Point are correctly switched on and at a distance

such as to guarantee a stable communication signal with the device

2. the Router has full access to the Internet and there are no browsing restrictions

(firewall settings, parental control,...)

3. The 2.4 GHz frequency band is also enabled in the Router settings (if the Router

only supports the 5 GHz frequency range, it will not be possible to operate the device;

for further information see the user instructions of your Router)

4. the smartphone used for configuration is connected to the same Wi-Fi network to which

the device is connected

5. position detection (GPS) of your smartphone is active and the consent to the

Energy Wi-Fi App to be able to identify the position (GPS) of the device is enabled

(adapt the settings on the smartphone such as to be able to perform this tracking;

for further information see the instructions of your

smartphone)

E-mail

Password

Forgotten password?

Or login with:

No devices

currently configured.

Set up a new device

The key on the device, depending on the type of pressure exerted, is used to perform the operations described in the table:

KEY Pressure type Function

SET

Prolonged pressure (> 3 sec) Enabling of BLE mode for remote control con guration

Short pressure Forcing of communication with the server

Short pressure

(during the remote control con guration phase) BLE mode output for remote control con guration

Prolonged pressure (> 5 sec)

(during the remote control con guration phase) Reset settings: reset of all settings to factory values and deletion of account association

8KEYBOARD OPERATION

Vemer S.p.A.

I - 32032 Feltre (BL) • Via Camp Lonc, 16

e-mail: info@vemer.it - web site: www.vemer.it

1 Green LED: Wi-Fi network connection

status 

2 SET key: con guration activation/

deactivation

3 Clamps for pulse output

4 Yellow LED: Wi-Fi con guration/

pairing or power output

5 Red LED: absorbed energy signal

( ashing with a frequency of 10Wh)

6 Clamps for direct insertion of

measuring conductors

information to users pursuant to art. 14 of the directive

2012/19 / EU of the european parliament and of the council

of 4 july 2012 on waste electrical and electronic equipment (WEEE)

If the crossed-out bin symbol appears on the equipment or packaging,

this means the product must not be included with other general waste

at the end of its working life.

The user must take the worn product to a sorted waste center,

or return it to the retailer when purchasing a new one.

Products for disposal can be consigned free of charge (without any new purchase obligation)

to retailers with a sales area of at least 400 m

2, if they measure less than 25 cm.

An efficient sorted waste collection for the environmentally friendly disposal of the used device, or its

subsequent recycling, helps avoid the potential negative effects on the environment and people’s health,

and encourages the re-use and/or recycling of the construction materials.

APP DESCRIPTION

9Thanks to the you can manage your device remotely, easily and intuitively. Energy Wi-Fi App

Important: The following figures display the App at the time of publication of these user instructions. Newer versions of the App may deviate in terms of graphics and content.

HOW TO DO IN CASE OF REPLACEMENT OF THE

ROUTER

11 HOW TO DELETE THE DEVICE LINKING FROM

AN ACCOUNT (DE-LINK) AND TO RESET THE

SETTINGS

In case of replacement of the Router/Access Point of the home network or if it is necessary to

change the network settings entered in the device (SSID network name or password) configure

the device described in BOX 6.

Important: Do not remove/delete the device from the application of the user with whom

the device is associated before proceeding with the configuration procedure.

ICON LEGEND

House

Energy-230 Wi-F

Online

House

Energy-230 Wi-F

Offline since 06/02/2024

House

Energy-230 Wi-F

Transferring

House

Energy-230 Wi-F

Received

Indicates an OnLine device

associated with your account

Indicates an OffLine device

associated with your account

Indicates a device transferred to

another user

Indicates a device received from

another user

If you need to unpair/delete a device from your user and/or to reset the network settings of the

device, proceed in one of the following two ways to do so alternatively:

a. on the go to the "HOME" page, identify the device to unpair/delete, select the App Delete

option in the device menu and confirm.

b. on the , press and hold the until the starts flashing Energy Wi-Fi SET key yellow LED ( )

quickly in order to activate the configuration mode.

At the end of one of the two operations described above, the green( ) ( ) and yellow

LEDs on the device will briefly light up simultaneously to confirm that the operation

has taken place.

Important: Perform a reset to clear the network settings and reset the partial meter,

returning the device to the factory values.

Reconfigure the device (see BOX 6) to restore normal operation.

Now wait for the to start flashing slowly. yellow LED ( )

Now press and hold the (at least 5 seconds) until the SET key green and yellow ( ) ( )

LEDs come on simultaneously.

Home

House

Beach house

Office

Energy-230 Wi-F

Online

Delete

Rename

E-mail

Password

Forgotten password?

Or login with:

Home

House

Beach house

Office

Energy-230 Wi-Fi

Online

Go to Premium

users@example.com

Version 1.0.0 - 2024010900

Delete account

Change password

Logout

Information

225.9

0.38

0.06

Partial consumption

Total consumption

109,41 kWh

46,59 kWh

From 12:00 of 10/01/2024

Device detail

House

Access consumptions

Monthly

consumption

Daily

consumption

Hourly

consumption

House

46,59 kWh

January 2024

2024

House

1,78 kWh

1 January

January 2024

Monthly

consumption

Daily

consumption

Hourly

consumption

House

0,08 kWh

1 January

04:00

Monthly

consumption

Daily

consumption

Hourly

consumption

Settings

Device name

Date and time

Keypad block

House

4/30

10 January 2023, 12:22:51

Activate/deactivate the keypad block

Save

Power threshold alarm

Power (kW)

Delay (S)

Hysteresis (kW)

You will receive a notification when

the indicated power is exceeded

Power alarm

Save

Push notifiations activation

E-mail notifications activation

e-mail of recipient for alarm notification

Consumptions warning

Save

Consumption exceeding warning

Threshold (kWh)

You will receive a notification when

the partial energy value

indicated is exceeded

Push notifiations activation

E-mail notifications activation

e-mail of recipient for alarm notification

CONSUMPTION EXCEEDING WARNING

(Premium version only)

Used to activate the receipt of push notifications

on your smartphone

Used to activate the receipt of e-mail notifications

and to enter the e-mail address

Used to activate or deactivate the consumption

exceeding alarm

Used to enter the value for generating of the warning

HOURLY CONSUMPTION GRAPH

Indicates the consumption recorded in the selected time

Used to select the consumption period to be displayed

Indicates the selected time

Used to select the consumption day to be displayed

Indicates the graph with the consumption trend

of the selected day, hour by hour

APPLICATION MENU

Vemer account used to access the application

Used to change the account password

with which you logged into the application

Used to delete the Vemer account created with the

registration from the Cloud server (as required by GDPR)

Used to view contacts

and to access the Privacy Policy

Used to log out of the application

to be able to access it with another user (see BOX 5)

HOME

Used to rename or delete the device

(see BOX 11)

Identifies the status of the device

(see icon legend table)

Used to start the configuration procedure

of a new device (see BOX 6)

DEVICE DETAIL

They allow access to the advanced

configuration of the device

Indicates the consumption of

the total energy measured by the device

Allows access to graphs relating

to energy consumption

Indicates the partial energy

consumption and when the last

reset occurred

They indicate the three instantaneous

quantities measured:

Voltage

Current

Power

DAILY CONSUMPTION GRAPH

Used to select the consumption month to be

displayed (Premium version only)

Indicates the selected day

Indicates the graph with the

consumption trend of the selected

month, day by day

Used to select the consumption

period to be displayed

Indicates the consumption

recorded on the selected day

POWER THRESHOLD ALARM

(Premium version only)

Used to activate the receipt of push

notifications on your smartphone

Used to activate or deactivate the alarm

when the power threshold is exceeded

Used to activate the receipt of

e-mail notifications and to enter

the e-mail address

They are used to enter the values

for which an alarm is generated:

1) Power (kW)

2) Delay (seconds)

3) Hysteresis (kW)

SETTINGS

Used to rename the product

Used to check the date and time

synchronised on the device

Used to activate/deactivate

operation of the device keypad

MONTHLY CONSUMPTION GRAPH

(Premium version only)

Indicates the graph with the

consumption trend of the selected

year, month by month (the system is

used to store in the Cloud and

to view the consumption

of the last 18 months)

Used to select the consumption period

to be displayed

Indicates the selected month

Used to select the consumption year to

be displayed

Indicates the consumption recorded in

the selected month

Enter e-mails and passwords

chosen during registration

(see BOX 5)

Recovers login credentials

if forgotten

Used to create a new Vemer account

(see BOX 5)

225.9

0.38

0.06

Settings

Power threshold

alarm

Consumption

exceeding warning

Transfer

Partial consumption

reset

Download

consumption history

Device info

Access consumptions

CONFIGURATION MENU Allows access to the device

settings menu

Allows access to the Power Threshold Alarm

menu ( Premium version only)

Allows access to the Consumption Exceeding Warning

menu (Premium version only)

Used to transfer control of the device

to another user (Premium version only)

Used to download the consumption history saved

on the Cloud (Premium version only)

Used to reset the partial energy consumption

meter

Used to view device information:

1) Identifier

2) Serial Number

3) Modem version

4) MAC address

5) Wi-Fi signal strength

Product specificaties

Merk:	Vemer
Categorie:	Meetapparatuur
Model:	Energy-230 Wi-Fi

Heb je hulp nodig?

Als je hulp nodig hebt met Vemer Energy-230 Wi-Fi stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Meetapparatuur Vemer

Vemer Energy-230 Wi-Fi Handleiding

16 Mei 2024

Vemer Energy-230 Micro LCD Handleiding

17 Mei 2023

Vemer Energy-3x130 PWRi Handleiding

11 April 2023

Vemer Energy-400 D90 Handleiding

30 Maart 2023

Vemer Energy-400 PWR Handleiding

29 Maart 2023

Vemer Energy-400 D PWR Handleiding

1 Maart 2023

Vemer Energy-230 Micro Handleiding

27 Februari 2023

Vemer Energy-230 LC Handleiding

11 Februari 2023

Vemer Energy-View Handleiding

20 Januari 2023

Vemer Energy-400 M PWRi Handleiding

13 Januari 2023

Handleiding Meetapparatuur

Nieuwste handleidingen voor Meetapparatuur

Uni-T UT673PV Handleiding

5 November 2024

Sauter 281-301 Handleiding

3 November 2024

Sauter TVL-XL Handleiding

3 November 2024

Sauter 283-302 Handleiding

3 November 2024

Sauter FC 1K-BT Handleiding

3 November 2024

Sauter 283-502 Handleiding

3 November 2024

Sauter HEA 100 Handleiding

3 November 2024

Sauter TI-HED Handleiding

3 November 2024

Sauter 281-101 Handleiding

3 November 2024

Sauter TVO 500N300 Handleiding

3 November 2024