Sauter SD 50N100 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Sauter SD 50N100 (10 pagina's) in de categorie Meetapparatuur. Deze handleiding was nuttig voor 7 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/10
SD BA- -e-2121
Sauter GmbH
Ziegelei 1
D-72336 Balingen
e-mail: info@kern-sohn.com
Phone : +49-[0]7433- 9933-0
Fax: +49-[0]7433- - 9933 149
Internet: www.sauter.eu
Instruction manual spring testing
system
SAUTER SD
Version 2.1
11/2021
GB
PROFESSIONAL MEASURING
2 - -e-2121 SD BA
GB
Congratulations on your purchase of the SAUTER SD spring test bench. We hope you
enjoy your quality measurement system with its wide range of functions and high
reproducibility. If operated correctly, this high-quality product will give you many years
of use.
For questions, wishes or suggestions we are always at your disposal.
Table of contents:
Scope of delivery ...................................................................................................... 3
1 Weight and dimensions ................................................................................. 3
2 Check before use ........................................................................................... 3
3 Technical data ................................................................................................ 3
4 Operation ........................................................................................................ 4
4.1 Display ....................................................................................................................................... 4
4.2 Control keys .............................................................................................................................. 4
4.3 Limit value display good / bad ................................................................................................ 6
4.4 Simple measurement (track mode) ......................................................................................... 6
4.5 Peak hold function (peak mode) ............................................................................................. 6
4.6 Auto Peak Hold Mode (Auto Peak Mode) ............................................................................... 6
4.7 Minimum limit value function to activate the measured value storage .............................. 6
4.8 Storage of peak values and calculation of average values from up to 10 values ............. 7
4.9 Reset key ................................................................................................................................... 7
5 Thread of the ne adjustment screw ............................................................ 7
6 Printout to printer or PC ................................................................................ 7
7 General safety instructions ........................................................................... 9
SD BA- -e-2121 3
Scope of delivery
- SAUTER SD
- Power cord
- Instruction manual
- Additional descriptions
1 Weight and dimensions
Test bench
SD 50N100
SD 100N100
SD 200N100
SD 500N100
Dimensions
(LxWxH)
300x235x620mm
Weight
21kg
2 Check before use
After receipt of the test stand, it should be checked in advance whether no transport
damage has occurred, whether the outer packaging, the metal housing, other parts
or even the test stand itself have been damaged. If any damage is evident, please
notify SAUTER GmbH immediately.
3 Technical data
Test bench
SD
50N100
SD
100N100
SD
200N100
SD
500N100
Maximum force
50 N
100 N
200 N
500N
Readability
0,01N
0,02N
0,05N
0,1N
Maximum stroke
length
100mm
Maximum
measuring room
height
100mm
Working
temperature
20±10°C
Storage and
transport temp.
-5°C~40°C
Relative air
humidity
15%~80%


Product specificaties

Merk: Sauter
Categorie: Meetapparatuur
Model: SD 50N100

Heb je hulp nodig?

Als je hulp nodig hebt met Sauter SD 50N100 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Meetapparatuur Sauter

Handleiding Meetapparatuur

Nieuwste handleidingen voor Meetapparatuur