Tripp Lite PDUMH16HV Handleiding

Tripp Lite Stekkerdoos PDUMH16HV

Lees hieronder de 📖 handleiding in het Nederlandse voor Tripp Lite PDUMH16HV (36 pagina's) in de categorie Stekkerdoos. Deze handleiding was nuttig voor 20 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/36

Owner’s Manual

Metered Rack PDU

Model: PDUMH16HV

(Series Number: AG-00D9)

Important Safety Instructions 2

Installation 3

Features 5

Warranty & Product Registration 7

Español 8

Français 15

Русский 22

Deutsch 29

1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support

PROTECT YOUR INVESTMENT!

and ultimate peace of mind.

You could also win an

ISOBAR6ULTRA surge protector—

a $100 value!

www.tripplite.com/warranty

18-11-319-93331C.indb 1 2/20/2019 4:44:40 PM

Important Safety Instructions

SAVE THESE INSTRUCTIONS

This manual contains instructions and warnings that should be

followed during the installation, operation and storage of this

product. Failure to heed these instructions may affect your

warranty.

Important Warnings

• Operate the PDU at indoor temperatures between 32°F and 104°F (between 0°C and 40°C)

only.

• Provide adequate protection against excess currents, short circuits, and ground faults in

accordance with local and national electrical code, such as NEC in the U.S.

• The mains socket that supplies the PDU should be near the PDU and easily accessible.

• The PDU provides convenient multiple outlets but it DOES NOT provide surge or line noise

protection for connected equipment.

• The PDU is designed for indoor use only in a controlled environment away from excess

moisture, temperature extremes, conductive contaminants, dust or direct sunlight.

• Do not connect the PDU to an ungrounded outlet or extension cords or adapters that

eliminate the connection to ground.

• The power requirement for each piece of equipment connected to the PDU must not exceed

the individual outlet's load rating.

• The total power requirement for equipment connected to the PDU must not exceed the

maximum load rating for the PDU.

• Do not drill into or attempt to open any part of the PDU housing. There are no user-serviceable

parts inside.

• Do not attempt to modify the PDU, including the input plugs and power cables.

• Do not attempt to use the PDU if any part of it becomes damaged.

• Do not attempt to mount the PDU to an insecure or unstable surface.

• Never attempt to install electrical equipment during a thunderstorm.

• Use of this equipment in life support applications where failure of this equipment can

reasonably be expected to cause the failure of the life support equipment or to significantly

affect its safety or effectiveness is not recommended. Do not use this equipment in the

presence of a flammable anesthetic mixture with air, oxygen or nitrous oxide.

• The PDU must be installed by a qualified technician only.

• Install in accordance with local electrical codes. Be sure to use the proper over current

protection for the installation, in accordance with the plug rating/equipment rating.

• The electrical sockets supplying power to the equipment shall be installed near the equipment

and be easily accessible.

18-11-319-93331C.indb 2 2/20/2019 4:44:40 PM

Installation

Note: Regardless of installation configuration, the user must determine the fitness of hardware

and procedures before mounting. The PDU and included hardware are designed for common

rack and rack enclosure types and may not be appropriate for all applications. Exact mounting

configurations may vary.

1-1 1U Rack Installation. Attach the PDU to

the rack by inserting four user-supplied

screws A through the PDU mounting

brackets B and into the mounting holes of

the rack rail as shown.

1-2 0U Rack Installation. Part 1: Remove the

screws C attaching the mounting brackets

to the PDU, change the orientation of the

brackets as shown and reattach the

brackets. Use only the screws supplied by

the manufacturer or their exact equivalent

(#6-32, 1/4” flat head). Attach the Part 2:

PDU vertically by inserting two or more user-

supplied screws A through the PDU

mounting brackets B and into mounting

points in the rack or rack enclosure.

1-3 Wall Installation. After repeating Part 1

above, attach the PDU to a stable mounting

surface by inserting two or more user-

supplied screws A through the PDU

mounting brackets B and into secure

mounting points on the mounting surface.

1-4 Under-Counter Installation. After repeating

Part 1 above, attach the PDU to a stable

mounting surface by inserting four user-

supplied screws A through the PDU

mounting brackets B and into secure

mounting points on the mounting surface.

1-1

1-4

1-2

1-3

18-11-319-93331C.indb 3 2/20/2019 4:44:41 PM

Product specificaties

Merk:	Tripp Lite
Categorie:	Stekkerdoos
Model:	PDUMH16HV
Kleur van het product:	Zwart
Gewicht:	1770 g
Breedte:	444.5 mm
Diepte:	165.1 mm
Hoogte:	44.4 mm
Snoerlengte:	2.5 m
Gewicht verpakking:	2950 g
Breedte verpakking:	519.9 mm
Diepte verpakking:	277.9 mm
Hoogte verpakking:	77 mm
Materiaal behuizing:	Metaal
LED-indicatoren:	Ja
Beeldscherm:	LCD
Land van herkomst:	Taiwan
Afmetingen verpakking (BxDxH):	521 x 279 x 76 mm
Certificering:	CE (IEC / EN60950-1), GOST
Duurzaamheidscertificaten:	RoHS
Hoogte, in bedrijf:	0 - 3000 m
Afmetingen (B x D x H):	444 x 165 x 28.7 mm
Montage:	Horizontaal
Stekker:	IEC309
(Buitenste) hoofdverpakking hoogte:	77 mm
(Buitenste) hoofdverpakking breedte:	519.9 mm
(Buitenste) hoofdverpakking brutogewicht:	2950 g
(Buitenste) hoofdverpakking lengte:	277.9 mm
Hoeveelheid per (buitenste) hoofdverpakking:	1 stuk(s)
Rackcapaciteit:	1U
Bedrijfstemperatuur (T-T):	-15 - 50 °C
Relatieve vochtigheid in bedrijf (V-V):	5 - 95 procent
Aantal AC uitgangen:	10 AC-uitgang(en)
Nominale input voltage:	200-240 V
Stopcontacttypes:	C13 coupler, C19 coupler
Stroom (max.):	16 A
PDU types:	Gemeten
Netspanning, in bedrijf:	200-240 V
Output-aansluitingen:	8 x C13 & 2 x C19