Tripp Lite PDU3XMV6G32 Handleiding

Tripp Lite Stekkerdoos PDU3XMV6G32

Lees hieronder de 📖 handleiding in het Nederlandse voor Tripp Lite PDU3XMV6G32 (56 pagina's) in de categorie Stekkerdoos. Deze handleiding was nuttig voor 45 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/56

Owner’s Manual

3-Phase Metered 0U

Power Distribution Unit

(Phase and Bank Measurements)

PDU3XMV6G32

(Series Number: AG-00BD)

Important Safety Instructions 2

Installation 3

Digital Display 5

Using the Digital Display 6

Features 12

Service 13

Warranty and 14

Product Registration

Español 15

Français 29

Русский 43

1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support

14-08-206-93338E.indb 1 10/9/2014 11:31:48 AM

Important Safety Instructions

SAVE THESE INSTRUCTIONS

This manual contains instructions and warnings that should be followed during

the installation, operation, and storage of this product. Failure to heed these

instructions and warnings may affect the product warranty.

• The PDU provides the convenience of multiple outlets, but DOES NOT provide surge or line

noise protection for connected equipment.

• The PDU is designed for indoor use only, in a controlled environment, away from excess

moisture, temperature extremes, conductive contaminants, dust or direct sunlight.

• Keep indoor ambient temperature between 32°F and 122°F (0°C and 50°C).

• The PDU must be installed by a qualiﬁed technician only.

• Do not attempt to mount the PDU to an insecure or unstable surface.

• Install in accordance with National Electrical Code standards. Be sure to use the proper

overcurrent protection for the installation, in accordance with the plug/equipment rating.

• Connect the PDU to an outlet that is in accordance with your local building codes and that is

adequately protected against excess currents, short circuits and earth faults.

• The electrical outlets supplying power to the equipment should be installed near the equipment

and easily accessible.

• Do not connect the PDU to an ungrounded outlet or to extension cords or adapters that

eliminate the connection to ground.

• Be sure to provide a local disconnect device on any models that are permanently installed

without a plug that is easily accessible.

• Never attempt to install electrical equipment during a thunderstorm.

• Individual equipment connected to the PDU should not draw more current than the individual

PDU’s outlet’s rating.

• The total load connected to the PDU must not exceed the maximum load rating for the PDU.

• Do not attempt to modify the PDU, input plugs or power cables.

• Do not drill into or attempt to open any part of the PDU housing. There are no user-serviceable

parts inside.

• Do not attempt to use the PDU if any part of it becomes damaged.

• Use of this equipment in life support applications where failure of this equipment can

reasonably be expected to cause the failure of the life support equipment or to signiﬁcantly

affect its safety or effectiveness is not recommended. Do not use this equipment in the

presence of a ﬂammable anesthetic mixture with air, oxygen or nitrous oxide.

14-08-206-93338E.indb 2 10/9/2014 11:31:48 AM

1-5

1-1

1-6

1-5

1-2 1-3 1-4

Installation

Mounting the PDU

Note: The illustrations may differ somewhat from your PDU model. Regardless of conﬁguration, the user must

determine the ﬁtness of hardware and procedures before mounting. The PDU and included hardware are designed

for common rack and rack enclosure types and may not be appropriate for all applications. Exact mounting

conﬁgurations may vary. Screws for attaching the mounting brackets to the PDU are included. Use only the screws

supplied by the manufacturer or their exact equivalent.

Note: Mounting buttons come preinstalled to the PDU for toolless mounting.

1-1 To mount the PDU using the pre-installed

mounting buttons, position the PDU as

desired in the rack enclosure, align the

buttons with the rack mounting slots,

and slide the PDU into position.

1-2 To attach the mounting brackets to the

PDU, remove the mounting buttons.

1-3 Attach the mounting brackets to the

PDU with the included screws.

1-4 Attach the PDU to a vertical rail in

your rack or rack enclosure. (Use the

mounting hardware that came with your

rack or rack enclosure to attach the

mounting brackets to the rail.)

1-5 To reinstall the mounting buttons for

toolless mounting, remove the mounting

brackets then install the mounting

buttons onto the PDU.

Note: Be sure to insert the 2 buttons into either

the upper hole at of the PDU or into each end

the lower hole at of the PDU.each end

1-6 To install the PDU with its outlets facing

the rear of the rack, use the included

PDUMVROTATEBRKT accessory. First,

attach the mounting button A to the

V-shaped bracket B using the included

screw and washer. Then, use the

button-mount slot to attach the bracket

to the PDU and the mounting button to

attach the PDU to the rack. The bracket

effectively repositions the mounting

brackets allowing for the PDU outlets to

face the rear of the rack.

14-08-206-93338E.indb 3 10/9/2014 11:31:50 AM

Product specificaties

Merk:	Tripp Lite
Categorie:	Stekkerdoos
Model:	PDU3XMV6G32
Kleur van het product:	Zwart
Gewicht:	6480 g
Breedte:	55.1 mm
Diepte:	63.2 mm
Hoogte:	1778 mm
Snoerlengte:	1.83 m
Gewicht verpakking:	9300 g
Breedte verpakking:	150.1 mm
Diepte verpakking:	1944.9 mm
Hoogte verpakking:	175 mm
Materiaal behuizing:	Metaal
LED-indicatoren:	Ja
Aan/uitschakelaar:	Ja
Land van herkomst:	Taiwan
Afmetingen verpakking (BxDxH):	150 x 175 x 1945 mm
Certificering:	Tested to CE (IEC 60950-1, EN55022, EN55024), EN Class A (Emissions), TAA Compliant
Duurzaamheidscertificaten:	RoHS
Temperatuur bij opslag:	-15 - 60 °C
Stroomspanning bescherming:	Overbelasting
Bedrijfstemperatuur, bereik:	32 - 122 °F
Hoogte, in bedrijf:	0 - 3000 m
Maximaal vermogen:	23000 W
Afmetingen (B x D x H):	55.1 x 63.2 x 1778 mm
Montage:	Verticaal
Stekker:	IEC309
Hoeveelheid per (buitenste) hoofdverpakking:	1 stuk(s)
Rackcapaciteit:	0U
AC-ingangsfrequentie:	50 - 60 Hz
Bedrijfstemperatuur (T-T):	0 - 50 °C
Relatieve vochtigheid in bedrijf (V-V):	5 - 95 procent
Aantal AC uitgangen:	42 AC-uitgang(en)
Nominale input voltage:	380-400 V
Stopcontacttypes:	C13 coupler, C19 coupler
Stroom (max.):	32 A
PDU types:	Gemeten
Netspanning, in bedrijf:	200-240 V
Aantal masterstopcontacten:	36
Aantal slavestopcontacten:	6
Maximum totaalstroomverbruik per fase:	16 A