Tripp Lite PDUMH15HVAT Handleiding

Tripp Lite Stekkerdoos PDUMH15HVAT

Lees hieronder de 📖 handleiding in het Nederlandse voor Tripp Lite PDUMH15HVAT (48 pagina's) in de categorie Stekkerdoos. Deze handleiding was nuttig voor 42 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/48

PROTECT YOUR INVESTMENT!

and ultimate peace of mind.

You could also win an

ISOBAR6ULTRA surge protector—

a $100 value!

www.tripplite.com/warranty

1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support

Owner’s Manual

Switched/Metered Rack PDU

with Automatic Transfer Switch

Models: PDUMH15AT, PDUMH15ATNET, PDUMH15HVAT,

PDUMH15HVATNET, PDUMH20AT, PDUMH20ATNET,

PDUMH20HVAT, PDUMH20HVATNET

Series Number: AGAC7625

1. Important Safety Instructions 2

2. Installation 3

2.1 Mounting the PDU 3

2.2 Connecting the PDU 3

2.3 Networking the PDU 6

2.4 Test and Conﬁgure 9

3. Features 11

4. Conﬁguration and Operation 14

4.1 Automatic Transfer Switch 14

4.2 Remote Monitoring and Control 15

5. Technical Support 16

6. Warranty and Product Registration 16

Español 17

Français 33

16-05-185-9335E0.indb 1 7/28/2016 3:04:37 PM

SAVE THESE INSTRUCTIONS

• This manual contains instructions and warnings that should be followed

during the installation, operation, and storage of this product. Failure to

heed these instructions and warnings may affect the product warranty.

• Warning: This equipment is compliant with Class A of CISPR 32. In a

residential environment, this equipment may cause radio interference.

• The PDU provides the convenience of multiple outlets, but DOES NOT provide surge or line noise

protection for connected equipment.

• The PDU is designed for indoor use only, in a controlled environment, away from excess

moisture, temperature extremes, conductive contaminants, dust or direct sunlight.

• Keep indoor ambient temperature between 32°F and 122°F (0°C and 50°C).

• The PDU must be installed by a qualified technician only.

• Do not attempt to mount the PDU to an insecure or unstable surface.

• Install in accordance with National Electrical Code standards. Be sure to use the proper

overcurrent protection for the installation, in accordance with the plug/equipment rating.

• Connect the PDU to an outlet that is in accordance with your local building codes and that is

adequately protected against excess currents, short circuits and earth faults.

• The electrical outlets supplying power to the equipment should be installed near the equipment

and easily accessible.

• Do not connect the PDU to an ungrounded outlet or to extension cords or adapters that

eliminate the connection to ground.

• Be sure to provide a local disconnect device on any models that are permanently installed

without a plug that is easily accessible.

• Never attempt to install electrical equipment during a thunderstorm.

• Individual equipment connected to the PDU should not draw more current than the individual

PDU’s outlet’s rating.

• The total load connected to the PDU must not exceed the maximum load rating for the PDU.

• Do not attempt to modify the PDU, input plugs or power cables.

• Do not drill into or attempt to open any part of the PDU housing. There are no user-serviceable

parts inside.

• Do not attempt to use the PDU if any part of it becomes damaged.

• Use of this equipment in life support applications where failure of this equipment can reasonably

be expected to cause the failure of the life support equipment or to significantly affect its safety

or effectiveness is not recommended. Do not use this equipment in the presence of a

flammable anesthetic mixture with air, oxygen or nitrous oxide.

1. Important Safety Instructions

16-05-185-9335E0.indb 2 7/28/2016 3:04:37 PM

PDUMH15AT, PDUMH15ATNET,

PDUMH20AT, PDUMH20ATNET

PDUMH15HVAT, PDUMH15HVATNET

PDUMH20HVAT, PDUMH20HVATNET

PDUMH15HVATNET

Primary InputSecondary Input

Primary Input

Secondary Input

2.2.1

PDUMH20AT

PDUMH20ATNET

PDUMH15AT

PDUMH15ATNET

PDUMH20HVAT

PDUMH20HVATNET

Primary Input (120V Models) Primary Input (208-240V Models)

2.1 Mounting the PDU

The PDU supports 1U Rack configurations.

Note: The user must determine the fitness of

hardware and procedures before mounting. The PDU

and included hardware are designed for common

rack and rack enclosure types and may not be

appropriate for all applications. Exact mounting

configurations may vary.

1U Rack Mounting: Attach the PDU to the

rack by inserting four user-supplied screws A

through the PDU mounting brackets B and

into the mounting holes of the rack rail as

shown.

2. Installation

2.2 Connecting the PDU

All PDU models include a primary and secondary AC power input (see diagram). The reference

table below lists each model’s primary and secondary inputs:

Model Primary Input Secondary Input*

PDUMH15AT NEMA 5-15P (permanent cord) IEC C14 inlet

PDUMH15ATNET NEMA 5-15P (permanent cord) IEC C14 inlet

PDUMH15HVAT IEC C14 inlet (detachable cord) IEC C14 inlet

PDUMH15HVATNET IEC C14 inlet (detachable cord) IEC C14 inlet

PDUMH20AT NEMA 5-15P (permanent cord) IEC C20 inlet

PDUMH20ATNET NEMA 5-15P (permanent cord) IEC C20 inlet

PDUMH20HVAT IEC C20 inlet (detachable cord) IEC C20 inlet

PDUMH20HVATNET IEC C20 inlet (detachable cord) IEC C20 inlet

Note: The PDUMH15HVATNET model uses plug lock inserts over C13 plugs to securely connect to the C14

primary and secondary inputs.

16-05-185-9335E0.indb 3 7/28/2016 3:04:39 PM

Product specificaties

Merk:	Tripp Lite
Categorie:	Stekkerdoos
Model:	PDUMH15HVAT
Kleur van het product:	Zwart
Gewicht:	4680 g
Breedte:	439.9 mm
Diepte:	367 mm
Hoogte:	43.4 mm
Snoerlengte:	3.66 m
Gewicht verpakking:	7060 g
Breedte verpakking:	515.1 mm
Diepte verpakking:	579.9 mm
Hoogte verpakking:	110 mm
Materiaal behuizing:	Staal
LED-indicatoren:	Status
Land van herkomst:	Taiwan
Afmetingen verpakking (BxDxH):	515 x 580 x 110 mm
Certificering:	TAA
Duurzaamheidscertificaten:	RoHS
Maat:	19 "
Hoogte, in bedrijf:	0 - 3000 m
Maximaal vermogen:	2400 W
Afmetingen (B x D x H):	440 x 367 x 43.4 mm
Montage:	Horizontaal
Stekker:	IEC 320
Hoeveelheid per (buitenste) hoofdverpakking:	1 stuk(s)
Rackcapaciteit:	1U
AC-ingangsfrequentie:	50 - 60 Hz
Bedrijfstemperatuur (T-T):	-15 - 50 °C
Relatieve vochtigheid in bedrijf (V-V):	5 - 95 procent
Aantal AC uitgangen:	10 AC-uitgang(en)
Nominale input voltage:	200-240 V
Stopcontacttypes:	C14 stekker
Stroom (max.):	10 A
PDU types:	Metered, Switched