Tripp Lite PDUH32HV19 Handleiding
Tripp Lite
Stekkerdoos
PDUH32HV19
Lees hieronder de 📖 handleiding in het Nederlandse voor Tripp Lite PDUH32HV19 (20 pagina's) in de categorie Stekkerdoos. Deze handleiding was nuttig voor 8 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/20
Basic Rack PDU
Important Safety Instructions 2
Important Warnings 2
Installation 3
Features 4
Warranty & Product Registration 4
Español 5
Français 9
Русский 13
Deutsch 17
Owner’s Manual
1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support
Copyright © 2019 Tripp Lite. All rights reserved.
PDUH30HV19
(Series Number: AG-00E6)
PDUH32HV19
(Series Number: AG-00E5)
PDUH30HV
(Series Number: AG-00E6)
PDUH32HV
(Series Number: AG-00E5)
PROTECT YOUR INVESTMENT!
Register your product for quicker service
and ultimate peace of mind.
You could also win an
ISOBAR6ULTRA surge protector—
a $100 value!
www.tripplite.com/warranty
21-03-409-9333BC.indb 1
21-03-409-9333BC.indb 1
21-03-409-9333BC.indb 1
21-03-409-9333BC.indb 121-03-409-9333BC.indb 1 4/1/2021 2:37:14 PM
4/1/2021 2:37:14 PM
4/1/2021 2:37:14 PM
4/1/2021 2:37:14 PM4/1/2021 2:37:14 PM
2
Important Safety Instructions
SAVE THESE INSTRUCTIONS
This manual contains instructions and warnings that should be followed
during the installation, operation and storage of this product. Failure to
heed these instructions and warnings will void the product warranty.
CAUTION Only those who are properly trained or qualified to use this device should
do so. Anyone who is not trained or qualified should not use this device unless it is
under the supervision of someone who is properly trained or qualified to do so.
Children must be supervised to ensure that they do not use the device as a toy.
Never use the device if the cord and plug are damaged; if it is not working properly,
or if it has been dropped or damaged, take it to an authorized service center for
inspection and repair.
If the power cord is damaged, it must be replaced by the manufacturer, its authorized
service agent, or by qualified personnel in order to avoid a danger.
Important Warnings
• The PDU provides the convenience of multiple outlets, but DOES NOT provide surge or line noise
protection for connected equipment.
• The PDU is designed for indoor use only, in a controlled environment, away from excess
moisture, temperature extremes, conductive contaminants, dust or direct sunlight.
• Keep indoor ambient temperature between 32°F and 104°F (0°C and 40°C).
• The PDU must be installed by a qualified technician only.
• Do not attempt to mount the PDU to an insecure or unstable surface.
• Install in accordance with National Electrical Code standards. Be sure to use the proper
overcurrent protection for the installation, in accordance with the plug/equipment rating.
• Connect the PDU to an outlet that is in accordance with your local building codes and that is
adequately protected against excess currents, short circuits and earth faults.
• The electrical outlets supplying power to the equipment should be installed near the equipment
and easily accessible.
• Do not connect the PDU to an ungrounded outlet or to extension cords or adapters that
eliminate the connection to ground.
• Be sure to provide a local disconnect device on any models that are permanently installed
without a plug that is easily accessible.
• Never attempt to install electrical equipment during a thunderstorm.
• Individual equipment connected to the PDU should not draw more current than the individual
PDU’s outlet’s rating.
• The total load connected to the PDU must not exceed the maximum load rating for the PDU.
• Do not attempt to modify the PDU, input plugs or power cables.
• Do not drill into or attempt to open any part of the PDU housing. There are no user-serviceable
parts inside.
• Do not attempt to use the PDU if any part of it becomes damaged.
• Use of this equipment in life support applications where failure of this equipment can reasonably
be expected to cause the failure of the life support equipment or to significantly affect its safety
or effectiveness is not recommended. Do not use this equipment in the presence of a
flammable anesthetic mixture with air, oxygen or nitrous oxide.
21-03-409-9333BC.indb 2
21-03-409-9333BC.indb 2
21-03-409-9333BC.indb 2
21-03-409-9333BC.indb 221-03-409-9333BC.indb 2 4/1/2021 2:37:14 PM
4/1/2021 2:37:14 PM
4/1/2021 2:37:14 PM
4/1/2021 2:37:14 PM4/1/2021 2:37:14 PM
3
Installation
Note: The illustrations may differ somewhat from
your PDU model.
1 The Determine Installation Configuration.
PDU supports four primary installation
configurations: 1U Rack, 0U Rack, Wall and
Under-Counter. Choose a configuration and
follow the installation instructions in the
appropriate section of Step 1 before
proceeding to Step 2.
Note: Regardless of installation configuration,
the user must determine the fitness of
hardware and procedures before mounting.
The PDU and included hardware are designed
for common rack and rack enclosure types
and may not be appropriate for all
applications. Exact mounting configurations
may vary.
1-1 1U Rack Installation. Attach the PDU to the
rack by inserting four user-supplied screws (A)
through the PDU mounting brackets ( ) and B
into the mounting holes of the rack rail as
shown.
1-2 Remove the 0U Rack Installation. Part 1:
screws ( ) attaching the mounting brackets to C
the PDU, change the orientation of the
brackets as shown and reattach the brackets.
Use only the screws supplied by the
manufacturer or their exact equivalent
(#6-32, 1/4” flat head). Attach the Part 2:
PDU vertically by inserting two or more user-
supplied screws ( ) through the PDU mounting A
brackets ( ) and into mounting points in the B
rack or rack enclosure.
1-3 After repeating Part 1 Wall Installation.
above, attach the PDU to a stable mounting
surface by inserting two or more user-supplied
screws ( ) through the PDU mounting brackets A
(B) and into secure mounting points on the
mounting surface.
1-4 After repeating Under-Counter Installation.
Part 1 above, attach the PDU to a stable
mounting surface by inserting four user-
supplied screws ( ) through the PDU mounting A
brackets ( ) and into secure mounting points B
on the mounting surface.
2 Attach the input plug of the PDU to a grounded outlet. Insert the plug directly into a
grounded outlet that does not share a circuit with a heavy electrical load (such as an air
conditioner or refrigerator).
3 Attach equipment to the PDU. Do not exceed the load rating of the PDU. The total electrical
current used by the PDU will be displayed on the digital meter in amperes.
2
1-1
1-2
1-3
1-4
3
A
A
A
C
C
B
B
B
A
A
B
C
Step 1
Step 1
Step 1
21-03-409-9333BC.indb 3
21-03-409-9333BC.indb 3
21-03-409-9333BC.indb 3
21-03-409-9333BC.indb 321-03-409-9333BC.indb 3 4/1/2021 2:37:15 PM
4/1/2021 2:37:15 PM
4/1/2021 2:37:15 PM
4/1/2021 2:37:15 PM4/1/2021 2:37:15 PM
Product specificaties
Merk: | Tripp Lite |
Categorie: | Stekkerdoos |
Model: | PDUH32HV19 |
Kleur van het product: | Zwart |
Gewicht: | 2870 g |
Breedte: | 439.4 mm |
Diepte: | 95.2 mm |
Hoogte: | 43.2 mm |
Snoerlengte: | 3.66 m |
Gewicht verpakking: | 3210 g |
Breedte verpakking: | 514.4 mm |
Diepte verpakking: | 285.8 mm |
Hoogte verpakking: | 76.2 mm |
Soort: | Eenfasig |
Materiaal behuizing: | Metaal |
Land van herkomst: | China |
Afmetingen verpakking (BxDxH): | 514 x 286 x 76 mm |
Duurzaamheidscertificaten: | RoHS |
Temperatuur bij opslag: | -15 - 50 °C |
Stroomspanning bescherming: | Overbelasting |
Maximaal vermogen: | 7700 W |
Afmetingen (B x D x H): | 445 x 95.3 x 45 mm |
Montage: | Horizontaal |
Stekker: | IEC309 |
(Buitenste) hoofdverpakking hoogte: | 304.8 mm |
(Buitenste) hoofdverpakking breedte: | 508 mm |
(Buitenste) hoofdverpakking brutogewicht: | 16270 g |
(Buitenste) hoofdverpakking lengte: | 533.4 mm |
Hoeveelheid per (buitenste) hoofdverpakking: | 5 stuk(s) |
Rackcapaciteit: | 1U |
AC-ingangsfrequentie: | 50 - 60 Hz |
Relatieve vochtigheid in bedrijf (V-V): | 5 - 95 procent |
GTIN (EAN/UPC)-nummer (buitenste) hoofdverpakking: | 10037332183207 |
Aantal AC uitgangen: | 4 AC-uitgang(en) |
Nominale input voltage: | 200-240 V |
Stopcontacttypes: | C19 stekker |
Stroom (max.): | 32 A |
PDU types: | Basis |
Netspanning, in bedrijf: | 200-240 V |
Heb je hulp nodig?
Als je hulp nodig hebt met Tripp Lite PDUH32HV19 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Stekkerdoos Tripp Lite
30 Mei 2023
29 Mei 2023
26 Mei 2023
25 Mei 2023
23 Mei 2023
21 Mei 2023
18 Mei 2023
4 Mei 2023
4 Mei 2023
3 Mei 2023
Handleiding Stekkerdoos
- Stekkerdoos Apc
- Stekkerdoos Bachmann
- Stekkerdoos Brennenstuhl
- Stekkerdoos Digitus
- Stekkerdoos Eaton
- Stekkerdoos Eglo
- Stekkerdoos Eminent
- Stekkerdoos Ewent
- Stekkerdoos Furman
- Stekkerdoos Gembird
- Stekkerdoos Hama
- Stekkerdoos HQ
- Stekkerdoos Icy Box
- Stekkerdoos Konig
- Stekkerdoos Kopp
- Stekkerdoos Nedis
- Stekkerdoos Ufesa
- Stekkerdoos Oregon Scientific
- Stekkerdoos Caliber
- Stekkerdoos GoGEN
- Stekkerdoos Steren
- Stekkerdoos Ubiquiti Networks
- Stekkerdoos Sven
- Stekkerdoos REV
- Stekkerdoos Bauhn
- Stekkerdoos Kondator
- Stekkerdoos Intellinet
- Stekkerdoos Energenie
- Stekkerdoos CyberPower
- Stekkerdoos Yato
- Stekkerdoos DataVideo
- Stekkerdoos Kindermann
- Stekkerdoos ATen
- Stekkerdoos Lanberg
- Stekkerdoos Anton/Bauer
- Stekkerdoos StarTech.com
- Stekkerdoos Legrand
- Stekkerdoos Panduit
- Stekkerdoos EVOline
- Stekkerdoos V7
- Stekkerdoos Oehlbach
- Stekkerdoos Geist
- Stekkerdoos Salicru
- Stekkerdoos Adam Hall
- Stekkerdoos Panamax
- Stekkerdoos Altronix
- Stekkerdoos Middle Atlantic
- Stekkerdoos Tecnoware
Nieuwste handleidingen voor Stekkerdoos
14 November 2024
15 Oktober 2024
15 Oktober 2024
1 Oktober 2024
6 September 2024
6 September 2024
10 Juli 2024
18 Juni 2024
26 Maart 2024
19 Maart 2024