Tripp Lite PDU15NETLX Handleiding

Tripp Lite Stekkerdoos PDU15NETLX

Lees hieronder de 📖 handleiding in het Nederlandse voor Tripp Lite PDU15NETLX (20 pagina's) in de categorie Stekkerdoos. Deze handleiding was nuttig voor 34 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/20

Owner’s Manual

PDU15NETLX

Mini Switched PDU

120V, 50/60Hz AC Input and Output

(AG-019E)

Important Safety Instructions 2

Installation 3

Features 4

Configuration and Operation 6

Technical Support 6

Warranty and Product Registration 7

Español 8

Français 15

PROTECT YOUR INVESTMENT!

and ultimate peace of mind.

You could also win an

ISOBAR6ULTRA surge protector—

a $100 value!

www.tripplite.com/warranty

1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support

17-02-373-9336CA.indb 1 6/2/2017 2:08:37 PM

Important Safety Instructions

SAVE THESE INSTRUCTIONS

This manual contains instructions and warnings that should be

followed during the installation, operation, and storage of this

product. Failure to heed these instructions and warnings may

affect the product warranty.

• The PDU provides the convenience of multiple outlets, but DOES NOT provide surge

or line noise protection for connected equipment.

• The PDU is designed for indoor use only, in a controlled environment, away from

excess moisture, temperature extremes, conductive contaminants, dust or direct

sunlight.

• Keep indoor ambient temperature between 32°F and 122°F (0°C and 50°C).

• The PDU must be installed by a qualified technician only.

• Do not attempt to mount the PDU to an insecure or unstable surface.

• Install in accordance with National Electrical Code standards. Be sure to use the

proper overcurrent protection for the installation, in accordance with the plug/

equipment rating.

• Connect the PDU to an outlet that is in accordance with your local building codes

and that is adequately protected against excess currents, short circuits and earth

faults.

• The electrical outlets supplying power to the equipment should be installed near the

equipment and easily accessible.

• Do not connect the PDU to an ungrounded outlet or to extension cords or adapters

that eliminate the connection to ground.

• Be sure to provide a local disconnect device on any models that are permanently

installed without a plug that is easily accessible.

• Never attempt to install electrical equipment during a thunderstorm.

• Individual equipment connected to the PDU should not draw more current than the

individual PDU’s outlet’s rating.

• The total load connected to the PDU must not exceed the maximum load rating for

the PDU.

• Do not attempt to modify the PDU, input plugs or power cables.

• Do not drill into or attempt to open any part of the PDU housing. There are no user-

serviceable parts inside.

• Do not attempt to use the PDU if any part of it becomes damaged.

• Use of this equipment in life support applications where failure of this equipment

can reasonably be expected to cause the failure of the life support equipment or to

significantly affect its safety or effectiveness is not recommended.

17-02-373-9336CA.indb 2 6/2/2017 2:08:37 PM

1-1

1-2

1-3

Installation

Mounting the PDU

The PDU supports three primary mounting configurations: 0U Rack (Vertical), Wall and

Under-Counter.

Note: Regardless of configuration, the user must determine the fitness of hardware and procedures before

mounting. The PDU and included hardware are designed for common rack and rack enclosure types and may

not be appropriate for all applications. Exact mounting configurations may vary. Screws for attaching the

mounting brackets are included. Use only the screws supplied by the manufacturer or their exact equivalent

(#6-32, 3/16" flat head).

1-1 0U Rack Mounting: Use 2 screws

A to attach each of the 2

mounting brackets B to the PDU.

Mount the PDU vertically by

inserting 2 or more user-supplied

screws C through the mounting

brackets B and into mounting

points in the rack or rack

enclosure.

1-2 Wall Mounting: Use 2 screws A

to attach each of the 2 mounting

brackets B to the PDU. Mount

the PDU to the wall by inserting 2

or more user-supplied screws C

through the mounting brackets B

and into secure mounting points.

1-3 Under-Counter Mounting: Use 2

screws A to attach each of the 2

mounting brackets B to the PDU.

Mount the PDU under the counter

by inserting 2 or more user-

supplied screws C through the

mounting brackets B and into

secure mounting points.

17-02-373-9336CA.indb 3 6/2/2017 2:08:38 PM

Product specificaties

Merk:	Tripp Lite
Categorie:	Stekkerdoos
Model:	PDU15NETLX
Kleur van het product:	Zwart
Gewicht:	1200 g
Breedte:	127 mm
Diepte:	43.9 mm
Hoogte:	177.8 mm
Snoerlengte:	1.8 m
Gewicht verpakking:	1490 g
Breedte verpakking:	212.1 mm
Diepte verpakking:	205 mm
Hoogte verpakking:	50 mm
Soort:	Eenfasig
Gebruikershandleiding:	Ja
Materiaal behuizing:	Metaal
LED-indicatoren:	Activity,Network,Power,Status
Land van herkomst:	Taiwan
Aantal Ethernet LAN (RJ-45)-poorten:	2
Aantal USB-aansluitingen:	1
Certificering:	UL 60950-1, CSA, NOM, TAA
Duurzaamheidscertificaten:	RoHS
Ondersteunde beveiligingsalgoritmen:	SNMP,SNMPv3
Temperatuur bij opslag:	-30 - 60 °C
Reset button:	Ja
Bedrijfstemperatuur, bereik:	32 - 122 °F
Hoogte, in bedrijf:	0 - 3000 m
Maximaal vermogen:	15200 W
Montage:	Verticaal
Stekker:	NEMA 5–15P
(Buitenste) hoofdverpakking hoogte:	180.1 mm
(Buitenste) hoofdverpakking breedte:	430 mm
(Buitenste) hoofdverpakking brutogewicht:	17900 g
(Buitenste) hoofdverpakking lengte:	450.1 mm
Hoeveelheid per (buitenste) hoofdverpakking:	12 stuk(s)
Rackcapaciteit:	0U
AC-ingangsfrequentie:	50/60 Hz
Bedrijfstemperatuur (T-T):	0 - 50 °C
Relatieve vochtigheid in bedrijf (V-V):	5 - 95 procent
GTIN (EAN/UPC)-nummer (buitenste) hoofdverpakking:	10037332203264
Aantal AC uitgangen:	2 AC-uitgang(en)
Nominale input voltage:	100; 120; 127 V
Stopcontacttypes:	NEMA 5–15R
Stroom (max.):	15 A
PDU types:	Geschakeld
Netspanning, in bedrijf:	100; 120; 127 V