Topeak Sport Camera Multi-Mount Handleiding

Topeak Niet gecategoriseerd Sport Camera Multi-Mount

Lees hieronder de 📖 handleiding in het Nederlandse voor Topeak Sport Camera Multi-Mount (1 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 29 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/1
1 2
2
3
3 41
Back
Side
SPORT CAMERA MULTI-MOUNT
User's Guide
INSTALLATION OF MOUNT A (for GoPro® HERO series and Shimano® Sport Camera)
INSTALLATION OF MOUNT B (for SONY® Action Cam / Mini)
• PLEASE READ ALL INSTRUCTIONS BEFORE FIRST USE!
• Design for GoPro® HERO series, Shimano® Sport
Camera and SONY® Action Cam / Mini only.
• Maximum Weight Capacity: 200 g / 7.05 oz
MOUNT ON HANDLEBAR
Accessories Required:
• Make sure all brackets are installed properly before riding. • NEVER exceed maximum weight capacity.
• Sport Camera Multi-Mount is designed for GoPro® HERO series, Shimano® Sport Camera and SONY® Action Cam / Mini only. DO NOT use with other types of cameras or digital devices.
IMPORTANT NOTES
MOUNT ON HELMET MOUNT ON SADDLE RAIL
GB
2-year Warranty: All mechanical components against manufacturer defects only.
Warranty Claim Requirements
To obtain warranty service, you must have your original sales receipt. Items returned without a
sales receipt will assume that the warranty begins on the date of manufacture. All warranties will
be void if the product is damaged due to user crash, abuse, system alteration, modification, or
used in any way not intended as described in this manual.
* The specifications and design are subject to change without notice.
Please contact your Topeak dealer with any questions.
For USA customer service call: 1-800-250-3068
www.topeak.com
* Shimano® is registered trademark of Shimano Inc.
* SONY® is registered trademark of Sony Corporation.
* Designed for use with GoPro® products. GoPro® is a registered trademark of GoPro, Inc.
Copyright © Topeak, Inc. 2015 M-TC3010-GB 05/15
WARRANTY
1
for SONY® Action
Cam / Mini
for GoPro®
HERO series
and Shimano®
Sport Camera
Mount BMount A
Handlebar Bracket
Rubber Pad x 6 pcs
Helmet Bracket
FRONT
BACK
Locking Lever
Release Lever
Adjusting Button
Install the device
on Mount A as
shown.
Install Handlebar Bracket
and tighten the screw.
1Install Saddle Rail Bracket and
tighten the screw.
Follow mounting procedure above
to install your device on
multi-mount.
Install proper size of Rubber Pad
then tighten the screw.
Tighten the
included screw.
GoPro®GoPro®
GoPro®
GoPro®
Shimano® Sport
Camera
Saddle Rail Bracket
with
M5 x 25 mm Screw
for ø mm22.2
Handlebar
M4 x 8 mm
Screw
M4 x 8 mm Screw M4 x 8 mm Screw
M4 x 8 mm Screw
M5 x 25 mm Screw
M5 x 20 mm Screw
M4 x 8 mm
Screw
M5 x 16 mm
Screw
M5 x 16 mm Screw
3mm Allen Key
x2
x2
x2
for ø 25.4 mm
Handlebar
for ø 31.8 mm
Handlebar
Straps x 2 pcs
2.5 mm Allen Key
3 mm Allen Key
M4 x 8 mm
Screw
2 1 Install Helmet Bracket and
tighten the screw.
Fasten the straps on helmet as shown.
Cut the strap for proper length after
installation.
2Install Saddle Rail Bracket on rail
and tighten the screw.
2
3 4 Follow mounting procedure above
to install your device on
multi-mount.
Press and hold the Adjusting Button
to fine tune for proper angle.
Press and hold the Adjusting Button
to fine tune for proper angle.
Follow mounting procedure above
to install your device on
multi-mount.
3 4 Press and hold the Adjusting Button
to fine tune for proper angle.
3 4
Accessories Required: Accessories Required:
PRESS
and HOLD
2.5 mm Allen Key
1.5 N.m/ 13.27 in-lb
2.5 mm Allen Key
1.5 N.m/ 13.27 in-lb
3 mm Allen Key
1.5 N.m/ 13.27 in-lb
2.5 mm Allen Key
1.5 N.m/ 13.27 in-lb
3 mm Allen Key
1.5 N.m/ 13.27 in-lb
Short
edge
Long
edge
PRESS and HOLD
HANDLEBAR Mount Kits
MOUNTS
HELMET Mount Kits
SADDLE RAIL Mount Kits
TOOLS Included
PRESS
and HOLD
Install SONY® Action Cam in original
waterproof case, then combine the
device with Mount B as shown.
Open the
locking lever
completely
then install
the device on
Multi-Mount.
Press Locking
Lever for
security.
Press
Locking
Lever for
security.
HOW TO RELEASE
1. Open the Locking
Lever completely.
2. Press and hold
the Release Lever.
3. Remove your device.
PRESS
Open the locking
lever completely
then install the
device on
Multi-Mount.
Multi-Mount
Remove the included
screw first
You can also use SONY® Action
Cam / Mini with original Tripod
Adaptor on Mount B.
You can use GoPro®
original screw too.

Product specificaties

Merk: Topeak
Categorie: Niet gecategoriseerd
Model: Sport Camera Multi-Mount

Heb je hulp nodig?

Als je hulp nodig hebt met Topeak Sport Camera Multi-Mount stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Niet gecategoriseerd Topeak

Topeak

Topeak Roadie Rack Handleiding

20 December 2024
Topeak

Topeak Fixer 8 Handleiding

18 December 2024
Topeak

Topeak Sport Camera Multi-Mount Handleiding

7 Oktober 2024
Topeak

Topeak Nano TorqBar 5NM Handleiding

29 Augustus 2024
Topeak

Topeak Nano TorqBar 4NM Handleiding

29 Augustus 2024
Topeak

Topeak Nano TorqBox 6NM Handleiding

29 Augustus 2024
Topeak

Topeak Nano TorqBox 5NM Handleiding

29 Augustus 2024
Topeak

Topeak Nano TorqBar 6NM Handleiding

29 Augustus 2024
Topeak

Topeak Nano TorqBar X Handleiding

29 Augustus 2024
Topeak

Topeak Nano TorqBox DX Handleiding

29 Augustus 2024

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Inglesina

Inglesina Welcome Pad Handleiding

22 December 2024
Inglesina

Inglesina Front Handleiding

22 December 2024
Inglesina

Inglesina Newborn Winter Muff Handleiding

22 December 2024
Inglesina

Inglesina Stroller Winter Muff Handleiding

22 December 2024
Protector

Protector AS-5030.3 V2 Handleiding

21 December 2024
Sabrent

Sabrent AU-MMCW Handleiding

21 December 2024
Sabrent

Sabrent AU-2X35 Handleiding

21 December 2024
Sabrent

Sabrent CB-RS232 Handleiding

21 December 2024
Owon

Owon 500W Handleiding

21 December 2024
Owon

Owon 300W Handleiding

21 December 2024