Topeak Hexus X Handleiding


Lees hieronder de šŸ“– handleiding in het Nederlandse voor Topeak Hexus X (2 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 2 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2
Install new chain pin or remove old chain pin.
Use Primary Chain Link Fence to install
or remove chain pin. Use Secondary
Chain Link Fence to loosen stiļ¬€ links.
Primary Chain
Link Fence
Secondary
Chain Link Fence
4mm
Allen
key
WARNING
Chain Pin Tool
Press chain pin
as little as
necessary to
loosen the
stiļ¬€ link.
4mm for
chain pin breaker
+ +
1 5 g1 4 g
USING CHAIN TOOL
HEXUSā„¢ X USER'S GUIDE
Tire Lever
Air Pressure
Release Button
Presta Core tool
EN
8 mm 5 mm 6 mm 5 mm 4 mm 4 mm
4 mm
3 mm
4 mm
2.5 mm 2 mm Phillips T15T25T30
2 mm
4 mm
2.5 mm
Chain
Hook
T25 Torx
T30
Torx
Chain pin breaker
6 mm
3 mm 5 mm
Phillips
Chain
Tool
8 mm
T25
T15
When pressing in the chain pin, push down on the
top of the chain to keep it fully engaged in the
chain tool cradle. Make sure the press pin of the
chain tool is centered against the chain pin.
Inspect chain rivet again and be
sure chain links can bend freely
after replacement.
* The chain tool is compatible with
single and multi-speed chains up to 12
speed, NOT including CampagnoloĀ® 11
speed hollow pin chains.
WARRANTY
M-TT2573B-GB 09/17Copyright Ā© Topeak, Inc. 2017
USING TIRE LEVERS BUILT-IN PRESTA
CORE TOOL
USING AIR PRESSURE
RELEASE BUTTON
TOOL MAINTENANCE
Use T25 Torx bit
on tire lever to adjust
the folding resistance.
USING CHAIN HOOK AND CHAIN TOOL
4 mm
Allen
key
USING T25 TORX
Tighten disc brake rotor bolts with the T25 Torx bit.
4mm
Allen Key
USING 8MM ALLEN KEY
HEXUSā„¢ X USER'S GUIDE
Tighten or
remove
two-piece
Presta valve
cores.
Insert 5mm Allen key into 8mm tool bit.
8 mm
T25
T15
2-year Warranty: All mechanical components against manufacturer defects only.
Warranty Claim Requirements
To obtain warranty service, you must have your original sales receipt. Items r rned without a sales receipt will assume that the warranty etu
begins on the date of manufacture. All warranties will be void if the product is damaged due to user crash, abuse, system alteration,
modiļ¬cation, or used in any way not intended as described in this manual.
* The speciļ¬cations and design are subject to change without notice.
Please contact your Topeak dealer with any questions.
For USA customer service call: 1-800-250-3068 / www.topeak.com
1. Lubricate and maintain tool with Teī˜ŸonĀ® based lubricant when needed.
2. To prevent rusting, keep tool dry.
MAINTENANCE
* CampagnoloĀ® is a registered trademark of Campagnolo S.r.I.
* Teī˜ŸonĀ® is a registered trademark of DuPont.


Product specificaties

Merk: Topeak
Categorie: Niet gecategoriseerd
Model: Hexus X
Kleur van het product: Black, Stainless steel
Gewicht: 170 g
Breedte: 90 mm
Diepte: 40 mm
Hoogte: 27 mm
Soort: Multitool
Materiaal: Chroom-vanadium staal
Aantal per verpakking: 1 stuk(s)
Merkcompatibiliteit: Topeak

Heb je hulp nodig?

Als je hulp nodig hebt met Topeak Hexus X stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Topeak

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd