Toa YW-4500 Q Handleiding

Toa Tv-antenne YW-4500 Q

Lees hieronder de 📖 handleiding in het Nederlandse voor Toa YW-4500 Q (4 pagina's) in de categorie Tv-antenne. Deze handleiding was nuttig voor 21 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/4
Please follow the instructions in this manual to obtain the optimum results from this unit.
We also recommend that you keep this manual handy for future reference.
YW-4500
WALL-MOUNTED WIRELESS ANTENNA
INSTRUCTION MANUAL
•Be sure to securely mount the unit on the wall or ceiling that is robust enough to stand the antenna weight.
Failure to do so may drop the antenna, causing personal injury and/or property damage.
•Do not expose the unit to rain or an environment where it may be splashed by water or other liquids, as doing so
may result in fire or electric shock.
•To prevent lightning strikes, install the unit at least five meters away from a lightning rod, and yet within the
protective range (angle of 45°) of the lightning conductor. Lightning strikes may cause a fire, electric shock or
personal injury.
•Since the unit is designed for in-door use, do not install it outdoors. If installed outdoors, the aging of parts causes
the unit to fall off, resulting in personal injury. Also, when it gets wet with rain, there is a danger of electric shock.
•Use nuts and bolts that are appropriate for the ceiling's or wall's structure and composition. Failure to do so may
cause the unit to fall, resulting in material damage and possible personal injury.
•Do not touch a plug or antenna during thunder and lightning, as this may result in electric shock.
•Leave the installation of an antenna to your TOA dealer because the installation requires expert knowledge. The
falling of an antenna may cause personal injury.
•Do not place heavy objects on the unit as this may cause it to fall or break which may result in personal injury
and/or property damage. In addition, the object itself may fall off and cause injury and/or damage.
1. SAFETY PRECAUTIONS
•Be sure to read the instructions in this section carefully before use.
•Make sure to observe the instructions in this manual as the conventions of safety symbols and messages
regarded as very important precautions are included.
•We also recommend you keep this instruction manual handy for future reference.
Safety Symbol and Message Conventions
Safety symbols and messages described below are used in this manual to prevent bodily injury and property
damage which could result from mishandling. Before operating your product, read this manual first and understand
the safety symbols and messages so you are thoroughly aware of the potential safety hazards.
English: page 1
Indicates a potentially hazardous situation which, if mishandled, could
result in death or serious personal injury.
WARNING
Indicates a potentially hazardous situation which, if mishandled, could
result in moderate or minor personal injury, and/or property damage.
CAUTION
Q
2
2. GENERAL DESCRIPTION
The TOA YW-4500 is an indoor dipole antenna designed to be used in a UHF band wireless system. A power lamp is
provided on the unit's bottom side to indicate the power supply status (it lights when power is supplied.).
Power for the YW-4500 is supplied on a coaxial cable from the antenna connector of the WT- or WD-
Cable loss can be compensated for by a built-in RF signal booster.
3. INSTALLATION PRECAUTIONS
•Avoid installing the unit in humid or dusty locations, in locations exposed to the direct sunlight, near the heaters, or in
locations generating sooty smoke or steam.
•When installing the YW-4500 in a room of a tall building, be sure to position it more than 1 m apart from a window
to minimize interference caused by external noises of radio waves.
•When using a wireless microphone, keep it 3 m or more away from the YW-4500.
Doing otherwise may cause unused other channels to operate or radio interference to occur.
•When using two or more antennas, they should be spaced out 6 to 18 m apart from each other.
•Take special care when treating coaxial cable end and when connecting the cable to the antenna and BNC
connector. Incomplete cable treatment and connection deteriorate receiving sensitivity, and increase interference
caused by external noises.
•Use the coaxial cable of 75 Ωimpedance.
4. NOMENCLATURE
[Front]
[Side] [Bottom]
[Top]
85 105
120
128
120
116
Sets attenuation level for 0, 10, or –
–20 dB positions.
(For details, refer to "7. ATTENUATOR
SWITCH SETTING.")
Lights when power is
supplied to the unit.
Attenuator switch
Power lamp
Bottom caseTop case
Unit: mm
5800
4820
3
Step 3. Strip coaxial cable end.
•RG-6/U
•RG-11/U
Step 2. Detach the top case from the bottom case.
•If the coaxial cable is wired over the wall from the
ceiling or floor
1. Cut the cable outlet of the frame using a pair of
cutting pliers, etc.
3. Run the coaxial cable through the cable outlet.
Cable outlet
Attenuator switch
Bottom case
Top case
5. INSTALLATION
Unit: mm
ø20
13
10312Jacket
Conductor
Braided shield
Dielectric
Unknit braided shields
and bend it back.
Braided shield
Braided shield
Conductor
13
103
•If the coaxial cable is to be drawn directly from the
wall surface
1. Drill a 20 mm hole.ø
2. Run the coaxial cable through the hole and the
bottom case as well, and draw it out as shown below.
•If the coaxial cable is installed using a recessed
electrical box (Mounting pitch: 83.5 mm)
Draw out the coaxial cable through the electrical box
and the bottom case.
Note: Be sure to use a pipe thick enough to allow the
wired coaxial cable to be easily inserted.
Step 1. Remove 4 screws on the top case.
2. Cut the supplied rubber bushing into halves. One
half is suited for the RG-6U cable (smaller internal
diameter) and other half for the RG-11/U cable
(larger internal diameter). Run the cable through
the bushing. (Insert the bushing into the cable entry
hole after cable installation completion.)
Rubber bushing

Product specificaties

Merk: Toa
Categorie: Tv-antenne
Model: YW-4500 Q

Heb je hulp nodig?

Als je hulp nodig hebt met Toa YW-4500 Q stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Tv-antenne Toa

Toa

Toa YW-7570 Handleiding

5 Februari 2023
Toa

Toa YW-4500 Q Handleiding

31 Januari 2023
Toa

Toa YW-4500 Handleiding

5 Oktober 2022

Handleiding Tv-antenne

Nieuwste handleidingen voor Tv-antenne

Wilson

Wilson NMO Handleiding

19 November 2024
Megasat

Megasat DVB-T 30 V2 Handleiding

6 November 2024
One For All

One For All 15584 Handleiding

2 November 2024
One For All

One For All 15520 Handleiding

2 November 2024
One For All

One For All SV 9429 Handleiding

2 November 2024
Thomson

Thomson ANT1538BK Handleiding

15 Oktober 2024
EMOS

EMOS J0704 Handleiding

16 Juli 2024
Sencor

Sencor SDA 102 Handleiding

3 Juli 2024
Sencor

Sencor SDA 512 Handleiding

3 Juli 2024
Sencor

Sencor SDA 502 Handleiding

2 Juli 2024