Tiptop Audio Z4000 Handleiding

Tiptop Audio Niet gecategoriseerd Z4000

Lees hieronder de 📖 handleiding in het Nederlandse voor Tiptop Audio Z4000 (4 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 58 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/4

www.tiptopaudio.com

Z4000 - Voltage Controlled Envelope Generator

User Manual

Introduction

The Z4000 is a four-segment envelope generator with an additional CV processor that can be

used to scale, invert, mirror or clip the generated envelope. With its snappy envelopes, the

Z4000 can generate complex CV signals for controlling any CV input in your modular.

Let’s get started.

To start using the Z4000, plug in a gate signal into the gate input, set ATTACK to minimum,

DECAY to 50%, SUSTAIN to 50%, and RELEASE to 50%. Set the ATTENUVERTER all the way to the

right and set the DEVIATER to 50%. Connect the OUT jack to the CV of a VCA or the FM of a lter

like the Z2040, or the FM input of the Z3000. When the gate goes high, the led should turn red

indicating an envelope. You should also hear the eect of the envelope over the VCA or lter.

Playing with segment knobs will let you set dierent envelopes, and playing with the

Attenuverter will let you scale down the envelope and invert it if set left of the 50%

position.

With the Deviater you can oset the envelope’s position, pushing it into the negative voltage

range (CCW, yellow light) or positive voltage range (CW, red light) by applying CV into the

Deviater’s CV input. The same eect can be done using external CV control from sequencers,

LFO’s, or another Z4000. You can even feedback the signal from the Z4000 into itself for further

manipulation of the curve shapes and time.

Segment Control Knobs Range up to 50%

You might have noticed that the segments control knobs start being responsive from about

50%. Although that might seems odd at rst, there is a good reason.

Creating snappy envelopes requires fast transients, but fast transients can also add artifacts to

the sound the envelope is applied to: This is known as pop or click.

In some sound design, this click is a welcomed part of the sound but in other designs, there is

a desire to reduce the click yet keep a snappy response.

Those two qualities are in opposite relation to each other. The Z4000’s rst 50% of the

segments’ knob range is dedicated to that initial area of sound design, providing you high

resolution for ne tuning of the envelope segments in the millisecond range. This large

millisecond range makes up for a great kitchen to cook up

transient sounds and percussive elements.

http://tiptopaudio.com/z4000-ns/

Segment Control Knobs Range from 50% and up

From 50% and up, the segments set envelopes in the range of a second and up to minutes,

and innity with the release set to maximum.

Attack Curve Switch

The attack curve switch (ATK) switches the attack segment slope from exponential to

logarithmic. This has a subtle eect and can be heard best with envelopes having long attack

segments. Below are two scope shots of the same envelope with the switch set in the two

modes:

Voltage Controlled Segments

Each of the four segments in the Z4000 are voltage controlled. The effective

voltage input range for each input is 0 to 5V. Higher voltage levels or negative

levels will not damage the Z4000. For example, the Z8000 Matrix Sequencer has

a voltage range of 0 to 10V so the effective range for the Z8000 to control the

Z4000 segments is up to 50% of the knob rotation. Please note that the incoming

CV is summed up with the internal voltage provided by the segment control knob,

i.e. if your Decay knob is set all the way to max, a CV in will do nothing as it

has no headroom left.

The CV inputs are what makes the envelope live, use them.

Attenuverter and Deviater Explained

The Attenuverter is a voltage attenuating and inverter; this means that in the 50% position, the

Z4000 will output no signal, turning the knob clockwise the envelope will become a positive

voltage and counter-clockwise will turn it into a negative voltage. The LED will indicate those

states with either an unlit, red, or yellow state, respectfully.

In addition, the envelope signal passes through yet another cv processor circuit called the

Deviater. What this does is add a static voltage to the signal, this is a mathematical analog

function of summing. The static voltage can be set to negative (counter-clockwise) or positive

(clockwise). So when summing the static voltage with the envelope voltage, a lot of interesting

things can happen such as osetting, mirroring and clipping. But voltage manipulation doesn't

end there, the Deviater includes a VC input allowing you to inject even more static signals or

dynamic signals into the analog “calculator”. Go wild with the Deviater—plug in audio or

another envelope.

http://tiptopaudio.com/z4000-ns/

Product specificaties

Merk:	Tiptop Audio
Categorie:	Niet gecategoriseerd
Model:	Z4000

Heb je hulp nodig?

Als je hulp nodig hebt met Tiptop Audio Z4000 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Niet gecategoriseerd Tiptop Audio

Tiptop Audio Z2040 LP-VCF Handleiding

3 Augustus 2023

Tiptop Audio HATS909 Handleiding

5 Mei 2023

Tiptop Audio Z4000 Handleiding

18 April 2023

Tiptop Audio SD909 Handleiding

13 April 2023

Tiptop Audio MISO Handleiding

2 April 2023

Tiptop Audio ModFX Handleiding

9 Maart 2023

Tiptop Audio MIXZ Handleiding

2 Maart 2023

Tiptop Audio CP909 Handleiding

28 Februari 2023

Tiptop Audio FSU Handleiding

27 Februari 2023

Tiptop Audio Fold Processor Handleiding

17 Februari 2023

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Inglesina Front Handleiding

22 December 2024

Inglesina Newborn Winter Muff Handleiding

22 December 2024

Inglesina Stroller Winter Muff Handleiding

22 December 2024

Protector AS-5030.3 V2 Handleiding

21 December 2024

Sabrent AU-MMCW Handleiding

21 December 2024

Sabrent AU-2X35 Handleiding

21 December 2024

Sabrent CB-RS232 Handleiding

21 December 2024

Owon 500W Handleiding

21 December 2024

Owon 300W Handleiding

21 December 2024

Sabrent SB-RKTQ4-1TB Handleiding

21 December 2024