Tiptop Audio CYMBL909 Handleiding

Tiptop Audio Niet gecategoriseerd CYMBL909

Lees hieronder de 📖 handleiding in het Nederlandse voor Tiptop Audio CYMBL909 (5 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 2 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/5
CYMBL909
TIPTOP AUDIO
CYMBL909
Introduction.
The CYMBL909 is a dual voice module featuring the original TR-909 crash and ride
sound generators adapted for modular synthesizer use. The front panel contains all of
the controls found on the original TR-909 drum machine, allowing you full control over
the sound’s volume levels to mix with other drums, and accent levels. In addition to those
original controls we have also added manual and voltage control of each generator
frequency, further enhancing this circuit.
About the Making of the CYMBL909.
The Cymbal is a one-to-one clone of the original circuit found in Roland's TR-909 drum
machine. During the design phase, we created additional features only when
implementation would not compromise the original signature sound. Cloning a circuit
that was designed and produced in the 80's was not an easy task. A variety of obstacles
including availability of the original parts, the modern SMT manufacturing process, the
dierences in +/-12V Eurorack power versus the +/-15V of the original 909, and far many
more were addressed in the creation of this module. To learn more about the process of
remaking the sound generators in this series please refer to the BD808 user guide.
Let’s get started.
On the left side of the module are the Crash controls, on the right are the Ride.
To start using the CYMBL909, take two gate outputs from your sequencer and plug them
into the GATE IN for each sound, plug the CR OUT and RD OUT to your mixer or sound
system, set ACCENT to max, set the LEVEL half way and TUNE half way. Readjust the
TUNE till you hear the original sound of each.
Dynamics and Gain:
Accent and Levels:
Dynamic Accent and Level control of any drum sound in the mix is a big part of making a
beat sound right. Dynamic Accent provides emphasis on a particular note through
loudness. In analog circuits like the CYMBL909, the accent pulse physically "hits" the
internal envelope circuit harder and provides not only a louder sound but also slightly
more attack (much like if you hit a real drum harder or softer with a drum stick.)
While the original 909 has one global accent knob for setting accents levels for all of its
sounds, the CYMBL909 (and all other drum modules in this series) oers an independent
accent level control. This feature expands the work flow beyond what is possible with
the original machine.
Accent Explained:
The accent input can be driven by either a gate/trigger or CV signal.
When the accent input is not in use, the incoming gate input is routed (normalized) to
both the accent input and the gate input. This serves two purposes:
1. To allow you to reach the hottest drum sound possible even when there is no accent
input signal connected.
2. It makes the ACCENT knob act as a fine control of the output gain level. This is very
useful in situations where the level knob range is too coarse for setting precise levels in
a mix with other drum sounds.
Connecting a gate or CV signal into the accent input will break the internal routing
mentioned above and will allow for independent control over accent regardless of the
incoming gate signal. In this case as long as there is no accent signal present, the drum
sound will be set to the minimum accent level set internally, and once the accent input
gets hit by a gate or CV signal, the drum sound will get louder in proportion to the accent
level set by the accent knob. In short: the higher the knob setting, the larger the
dierence will be in gain levels between the accented notes and the un-accented notes.
Using CV allows for even greater variations.

Product specificaties

Merk: Tiptop Audio
Categorie: Niet gecategoriseerd
Model: CYMBL909

Heb je hulp nodig?

Als je hulp nodig hebt met Tiptop Audio CYMBL909 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Niet gecategoriseerd Tiptop Audio

Tiptop Audio

Tiptop Audio CYMBL909 Handleiding

30 Januari 2025
Tiptop Audio

Tiptop Audio Z2040 LP-VCF Handleiding

3 Augustus 2023
Tiptop Audio

Tiptop Audio HATS909 Handleiding

5 Mei 2023
Tiptop Audio

Tiptop Audio Z4000 Handleiding

18 April 2023
Tiptop Audio

Tiptop Audio SD909 Handleiding

13 April 2023
Tiptop Audio

Tiptop Audio MISO Handleiding

2 April 2023
Tiptop Audio

Tiptop Audio ModFX Handleiding

9 Maart 2023
Tiptop Audio

Tiptop Audio MIXZ Handleiding

2 Maart 2023
Tiptop Audio

Tiptop Audio CP909 Handleiding

28 Februari 2023
Tiptop Audio

Tiptop Audio FSU Handleiding

27 Februari 2023

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Sunding

Sunding SD-581C Handleiding

30 Januari 2025
Viking

Viking PRONGK1 Handleiding

30 Januari 2025
Creative

Creative Sound BlasterX Katana V2X Handleiding

30 Januari 2025
XTRARM

XTRARM XTR-FS5100 Handleiding

30 Januari 2025
XTRARM

XTRARM XTR-FS5050 Handleiding

30 Januari 2025
XTRARM

XTRARM XTR-FS5110 Handleiding

30 Januari 2025
XTRARM

XTRARM XTR-FS2070 Handleiding

30 Januari 2025
Sunding

Sunding SD-589 Handleiding

30 Januari 2025
XTRARM

XTRARM XTR-FS4030 Handleiding

30 Januari 2025
Viking

Viking PROLPK1 Handleiding

30 Januari 2025