Thorens TD 800 Handleiding

Thorens Platenspeler TD 800

Lees hieronder de 📖 handleiding in het Nederlandse voor Thorens TD 800 (4 pagina's) in de categorie Platenspeler. Deze handleiding was nuttig voor 59 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/4

TD 800 Series

Instruction Manual

Dear Thorens customer, many thanks for your confidence

into our product, the record player of the 800 Series. With

the purchase of your record player you acquired a precision

instrument for the playback of records. To make him sound

perfect there is some attention necessary for setup and

handling. The manufacturing of this drive and the assembly

takes place completely in Germany at the highest enginee-

ring standarts - this still guarantees highest quality after

years. Understandably you want to start as immediately as

possible with listening to music. We ask you however:

Please read this guidance before the first use attentively, so

that you can use the drive optimally. We tried to put all the

necessary information into this manual. If you should have

still questions, which are not answered here, then you con-

tact us directly at www.Thorens.ch or with e-mail: tech-

nik@Thorens.ch.

Your team of Thorens

Conformity Declaration

We acknowledge the fact that the device belongs to this

instruction manual corresponds to valid EEC guidelines at

the time of printing for the acquisition of the CE-Sign. All the

necessary checks were made with positive result.

Warranty

Thorens manufacturer warranty. We commit ourselves to

replace incorrect sections of this device free of charge if it

should fail within the guarantee period. The warranty

amounts 2 year s for the turntable, counted starting from the

purchase date. The terms of the warranty are valid only if

within 4 weeks the enclosed warranty card is transmitted or

sended and filled out to Thorens. If this should not occur,

the warranty is 12 months. The manufacturer warranty

going beyond the legal warranty duration of 12 months ent-

itled Thorens to make on his own decision exchange or

repair of the defective sections. If a defect of your device

occurs within the guarantee period, then you inform

Thorens or your dealer under specification of the type of the

problem. Damage, which take place via neglect of the ope-

rating instruction or via outside mechanical effects, as well

as transport damages are not taken off by the warranty. The

warranty extends only to the turntable and the motor inclu-

sive power pack. Tone arm and pick-ups have the warranty

granted by the respective manufacturer. Warranty is valid

only for the first owner of the turntable. Sending the warr-

ranty card could be done by e-mail to technik@Thorens.ch

or by mail to THORENS EXPORT COMPANY LTD

IM JUNKHOLZ 44 ·

CH-4303 KAISERAUGST-BASEL / SWITZERLAND

Use of the turntable

Your turntable has been built to be used in closed rooms.

Please only use it in such rooms. Make sure that there is

not water or humidity close to the turntable or the PS 800

power supply.

The PS Power pack operates with 115V/230V main voltage.

Do never open it before pulling the main plug. There are no

user serviceable parts inside the PS 800.

In any case of a damage or question please contact your

importer or us.

Setup of the turntable

To avoid damages during transport your turntable comes

carefully packed and separated. Take out carefully all the

included parts. Place the included plates for the spikes

where you want to have the turntable playing. Place the

chassis on top of them. Adjust the correct height by turning

the spikes. Check the correct adjustment with a spirit level.

Now place the turntable platter with his axle over the bea-

ring and let it slide into it. Take care that the front end of the

axle is not crashing onto the bearing bottom. Then place the

rubber belt around the platter and the motor. Now put the

feltmat on the platter

Connecting the motor

Connect the motorcable with the power pack Ps 800. The

backside of the ps 800 offers 1 connector for motor. So plug

in the motor cable into the Ps 800 and lock the screws.

Make sure that the ON/OFF switch at the front side is in Off

position and the speed selector is on 33 rpm. Then plug in

the 3-pin connector from the external AC/AC adaptor to the

plug on the back of the PS800. Then connect the main

power cable to the AC/AC adaptor.

CAUTION! Never plug or unplug a motor while the Ps

800 is running. It will be damaged!

The Ps 800 power pack gets warm make sure that it is stan-

ding free so that the air can circulate.

On the Front of the Ps 800 are 2 switches. The left one is

for switching the Ps 800 on and off. An LED indicates the

operation. The right one is the speed selector. The you can

select between 33 and 45 rpm.

Because of an overload protection you must let the

turntable run for 33 rpm before switching to 45rpm. If

you do not do that the turntable will not spin at 45rpm.

Connecting the tonearm

Use the supplied RCA cable(Blue) and plug it into the plugs

on the back side of the turntable behind the tonearm. White

is left and red is right channel.

If your tonearm has not been supplied from Thorens please

use the manual supplied with the tonearm to make the

connection correct. This is only for turntables with Thorens

TP 250 or TP 300 tonearm factory mounted.

So now your turntable is ready to play.

If you have any questions please contact our service at:

e-mail: technik@thorens.ch

or your local distributor.

Thorens TP 300

Anti Skating(Bias) adjustment

Set the bias adjustment knob to the same number as the

tracking force. NOTE: This setting is not critical and a figu-

re of 1-1.5g will normally be suitable for moving magnet car-

tridges and 1.5-2g for most of the MC cartridges.

Product specificaties

Merk:	Thorens
Categorie:	Platenspeler
Model:	TD 800
Gewicht:	8000 g
Soort:	Draaitafel met riemaandrijving
Nominale snelheid:	33 1/3, 45 RPM
Productafmetingen (B x H x D):	420 x 125 x 350 mm
Draaiplateau diameter:	300 mm
Draaiplateau gewicht:	3000 g