TFA LOG110 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor TFA LOG110 (65 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 249 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/65
1 Log-Graph software
Version 1.0.1
The software enables the operation of the loggers 100/110 on a PC running Windows operating
system via a vacant USB port. It undertakes the setting of the logger and the readout/display and
archiving of recorded data. The parameters include all the functions available in the logger.
The gives an overview of all functions of the Log-Graph software. You will nd an index at content
the end of the manual.
1 Log-Graph
1.1 Contents
2 Introduction
2.1 Functional scope of the logger
2.2 Functional scope of the software
2.2.1 Logger settings
2.2.2 Logger status
2.2.3 Records
2.2.4 Actions
2.3 System requirements
2.4 Content of the software package
2.5 Installing the Log-Graph software
2.5.1 Installing the CD
2.5.2 Installing the downloads from the Internet
2.5.3 Installing the USB driver for logger operation on the USB port
2.5.3.1 Installation
2.5.3.2 Renaming the port
2.6 Communication between the PC and the logger
2.7 First connection of a device
3 Working with the Log-Graph software
3.1 Using the program menu
3.2 Using the device bar
3.3 Online view
3.4 Graph area
3.5 Status line
4 Basic settings for the software operation
5. Presentation of graphs and tables
5.1 Graph (without table)
5.2 Graph and table side by side
5.3 Table (without graph)
5.4 Functions for graph processing
5.4.1 Functions from the menu or the toolbar
5.4.2 Functions by using the mouse
5.4.3 Printing the graphs and the records
5.5 Window management
6. Log-Graph editor
6.1 Special editor functions in the active device window
Annex
Version overview
2 Introduction
This manual describes the installation of the Log-Graph software and its use in conjunction with
the loggers 100/110.
The software enables the operation of the loggers 100/110 on a PC running Windows operating
system via a vacant USB port. It undertakes the setting of the logger and the readout of recorded
data and supports all the fonctions available in the logger. The loggers 100 and 110 are
distinguishable from each other by the fact that the rst one incorporates a pure temperature
sensor while the second one has a combined temperature and humidity sensor. The logger 100
only provides raw temperature data, the logger 110 provides both temperature and humidity data
from which the dew point is calculated. An additional external temperature sensor may be
connected to both loggers via the vacant USB port.
The logger can only be operated using the buttons Start/Stop und Mode. The setting of the logger
and the readout of the recorded data must be performed via the Log-Graph software on the PC.
The connection of the logger to the PC is made using an appropriate USB cable plugged into an
available USB Port. When connecting the logger, the USB port is congured as virtual COM port
from 1-256 via the drivers installed. The logger is handled by the Log-Graph software as a device
on a serial port. This requires the installation of Windows drivers which are located on the
installation CD of Log-Graph (installation see 2.7.3 "Installing the drivers").
The paragraphs 2.1 to 2.6 describe the , the paragraph properties of the logger and the software
2.7 describes how to install the drivers and the software.


Product specificaties

Merk: TFA
Categorie: Niet gecategoriseerd
Model: LOG110

Heb je hulp nodig?

Als je hulp nodig hebt met TFA LOG110 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd TFA

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd