Tecomec TL136 Jolly Handleiding
Lees hieronder de đ handleiding in het Nederlandse voor Tecomec TL136 Jolly (13 pagina's) in de categorie Overig. Deze handleiding was nuttig voor 40 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/13
type FL 136
OWNERâS MANUAL
MANUEL DâINSTRUCTIONS
F
GB
11
8
12
16
15
14
13
7
456
3
10
1
2
9
ÂŽ
LISTED
GRINDING MACHINE
41DA
Issued by the Technical Assistance and Publications Office
ALL RIGHTS RESERVED
A copy of this manual is provided with each grinder.
NB: The descriptions and illustrations contained in this manual are not to be considered final.The manufacturer reserves the
right to make modifications without updating the manual.
INTRODUCTION
FOR YOUR OWN SAFETY READ INSTRUCTION MANUAL BEFORE OPERATING GRINDER.
Keep this manual for future reference.
To ensure the correct use of the grinder and to prevent accidents, do not start working without having read this manual carefully.
The manual explains how the various components work and provides instructions for carrying out the necessary checks and mainte-
nance operations.
SAFETY RULES
! WARNING ! - The use of accessories or attachments not recommended by the manufacturer may result in a risk of
injury to persons!
Any maintenance operation not described in this manual must only be carried out by an AUTHORIZED service center.
! CAUTION ! The following instructions should be carefully followed in order to reduce the risk of kick-back resulting from
improperly sharpened saw chains.
1 - USERS. The grinder must only be used by adults. Users must be in good physical condition and familiar with the instructions for
use.
2 - KEEP CHILDREN AWAY. All visitors should be kept at safe distance from work area.
3 - WEAR PROPER APPAREL. Never wear loose clothing, bracelets, neckties, rings or any other jewelry that could come into
contact or get caught with the grinding wheel or any other moving parts. Non slip footwear is recommended. Wear protective hair
covering to contain long hair.
4 - ALWAYS USE SAFETY GLASSES OR FACE SCREEN. Always wear gloves and protective eyewear while operating the grinder
and while retouching the wheel using the dressing stone.
Also use face or dust mask if cutting operation is dusty. Everyday eyeglasses only have impact resistant lenses, they are NOT
safety glasses.
5 - NEVER STOP THE WHEEL WITH YOUR HANDS. Never attempt to stop the rotation of the grinding wheel with your hands.
6 - DISCONNECT TOOLS before servicing. Make sure the plug is disconnected when fitting or changing the grinding wheel and
during any other operation of maintenance or transport.
7 - KEEP GUARDS IN PLACE AND IN WORKING ORDER. Never start the grinder without the wheel guards in place (12) and (15).
8 - REMOVE ADJUSTING KEYS AND WRENCHES. Make sure that keys and adjusting wrenches are removed from tool before
turning it on.
9 - DONâT FORCE TOOL. It will do the job better and safer at the rate for which it was designed. Each grinder has a plate indicating:
- size of arbor: Ă .866 in (22 mm)
- no-load speed in revolutions per minute: RPM 3400
- always to read instruction manual before operating the machine
- always to wear eye and face protection
- always use the proper grinding wheel
Also make sure that the voltage and frequency indicated on the plate applied to the grinder correspond to those of the mains
hook-up.
10 - REDUCE THE RISK OF UNINTENTIONAL STARTING. Always make sure that the start-up switch is in the â0â (OFF) position
before connecting the plug to the outlet.
11 - NEVER USE CABLES, PLUGS OR EXTENSION CABLES THAT ARE DEFECTIVE OR NON-STANDARD.
12 - REMOVE THE PLUG from the mains immediately if the cable is damaged or cut; for cable repair or replacement, contact your
authorized dealer or service center. The power supply cable is complete with terminals - with protection. The internal electrical
connection consists of inserting the feeding cable terminals directly in the switch. The electrical connection to the mains shall be
made in such a way as to prevent damages by peoples or vehicles which could endanger both them and you.
13 - KEEP WORK AREA CLEAN. Cluttered areas and benches invite accidents. Make sure that the working area of the grinding
wheel is free of tools or other objects before starting up the grinder. Frequently clean grinding dust from beneath grinder.
14 - DONâT USE IN DANGEROUS ENVIRONMENT. Donât use power tools in damp or wet locations, or expose them to rain. Keep
work area well lighted.
15 - CHECK THE POSITION OF THE CABLE DURING OPERATION, making sure that it remains outside the range of action of the
grinding wheel and is not under tension. Never operate in the vicinity of other electrical cables.
16 - DIRECTION OF FEED. Feed work into a blade or cutter against the direction of rotation of the blade or cutter only. Never advance
the chain with your left hand until the grinding wheel has moved entirely outside the work area.
17 - MAKE WORKSHOP KID PROOF with padlocks, master switches. Do not also allow anybody but the user to remain in the vicinity
of the grinder while it is operating or to touch the grinder supply cable.
18 - ALWAYS KEEP THE HAND-GRIPS CLEAN AND DRY.
19 - Before starting the grinder, MAKE SURE THAT THE GRINDING WHEEL IS CORRECTLY SECURED and outside the work area.
Do not overtighten the wheel nut.
20 - SECURE WORK. Make sure that the machine is stably secured, as shown in Figure 1. Use the vise to hold chain. It frees both
hands for moving the wheel down to grind the chain.
21 - DONâT OVERREACH. Keep proper footing and balance at all times.
22 - NEVER STAND ON TOOL. Always work in a stable and safe position. Serious injury could occur if the tool is tipped or if the
cutting tool is unintentionally contacted.
23 - ALWAYS FOLLOW THE INSTRUCTIONS for maintenance.
24 - CHECK DAMAGED PARTS. Before using the grinder, check to make sure that all the devices, those for safety and others, are in
good working order. A guard, a wheel or other part that is damaged should be carefully checked to determine that it will operate
properly and perform its intented function - check for alignment of moving parts, binding of moving parts, breakage of parts,
mounting, and any other conditions that may affect its operation. A guard, a wheel or other part that is damaged should be
properly repaired or immediately replaced.
GB
3
Ampere Rating
Volts Total lenght of cord in feet
AWGNot More Than
Not Recommended
120 V
240 V
0
6
10
12
6
10
12
16
18
18
16
14
16
16
16
12
16
14
14
14
12
12
25 ft.
50 ft.
50 ft.
100 ft.
100 ft.
200 ft.
150 ft.
300 ft.
aOnly the applicable parts of the Table need to be included. For instance, a 120-volt product need not include the 240-volt heading
More Than
25 - USE RECOMMENDED ACCESSORIES. Consult the ownerâs manual for recommended accessories.The use of improper
accessories may cause risk of injury to persons. Use only flanges furnished with the grinder. To guarantee the efficient and
consistent operation of your grinder, remember that any worn or broken parts must only be replaced using ORIGINAL SPARE
PARTS.
26 - USE ONLY RECOMMENDED GRINDING WHEELS, as specified on the table in Figure 7.
27 - CHECK YOUR MACHINE. Never work with a damaged, poorly repaired, incorrectly fitted, or arbitrarily modified grinder. Do not
remove, damage, or disable any safety device.
28 - USE RIGHT TOOL. Never use the grinder as a cutter or for grinding objects other than saw chains. Donât force tool or attachment
to do a job for which it was not designed.
29 - LEND YOUR GRINDER ONLY TO EXPERT USERS who are familiar with its operation and correct use, and always give them the
instruction manual to read before they start a job.
30 - MAINTAIN TOOLS WITH CARE. Keep tools sharp and clean for best and safest performance. Follow instructions for lubricating
and changing accessories.
31 - STORE YOUR GRINDER IN A DRY PLACE, raised off the ground and out of the reach of children.
32 - NEVER LET YOUR GRINDER BE EXPOSED TO RAIN OR DAMPNESS.
33 - NEVER USE THE GRINDER IN AN EXPLOSIVE OR INFLAMMABLE ATMOSPHERE.
34 - TAKE THE GRINDER TO YOUR DEALER. When your grinder is not in working order, do not abandon it on the work site or
elsewhere. Take it to your dealer who will store or dispose of it correctly.
35 - ALWAYS CONSULT YOUR DEALER for any clarification or important maintenance or repair operation.
36 - NEVER JERK THE CABLE TO DISCONNECT IT FROM THE OUTLET. Keep the cable away from heat, oil, and sharp objects.
37 - USE PROPER EXTENSION CORD. Make sure your extension cord is in good condition. When using an extension cord, be sure
to use one heavy enough to carry the current you product will draw. An undersized cord will cause a drop in line voltage resulting
in loss of power and overheating. Table 1 shows the correct size to use depending on cord length and nameplate ampere rating. If
in doubt, use the next heavier gage. The smaller the gage number, the heavier the cord.
HOW TO USE THE ELECTRIC SAW CHAIN GRINDER
! CAUTION - SETTING UP THE GRINDER
1 - The grinder must only be used in a place that is protected from dust and dampness, that is well-lighted, out of the reach
of children, and away from gasses or other inflammable or explosive liquids.
The grinder must be situated near a normal electrical outlet equipped with earth (grounded).**
Avoid using dangerous extension cables.
** GROUNDING INSTRUCTIONS.
A. In the event of malfunction or breakdown, grounding provides a path of least resistance for electric current to reduce the risk of
electric shock. This tool is equipped with an electric cord having an equipment-grounding conductor and a grounding plug. The
plug must be plugged into a matching outlet that is properly installed and grounded in accordance with all local codes and
ordinances.
Do not modify the plug provided - if it will not fit the outlet, have the proper outlet installed by a qualified electrician.
Improper connection of the equipment-grounding conductor can result in a risk of electric shock. The conductor with insulation
having an outer surface that is green with or without yellow stripes is the equipment-grounding conductor. If repair or
replacement of the electric cord or plug is necessary, do not connect the equipment-grounding conductor to a live terminal.
Check with a qualified electrician or service personnel if the grounding instructions are not completely understood, or if in doubt
as to whether the tool is properly grounded.
Use only 3-wire extension cords that have 3-prong grounding plugs and 3-pole receptacles that accept the toolâs plug.
Repair or replace damaged or worn cord immediately.
B. Grounded, cord-connected tools intended for use on a supply circuit having a nominal rating less than 150 volts:
This tool is intended for use on circuit that has an outlet that looks like the one illustrated in sketch A in Figure 1a. The tools has
a grounding plug that looks like the plug illustrated in sketch A in Figure 1a. A temporary adapter, which looks like the adapter
illustrated in sketches B and C, may be used to connect this plug to a 2-pole receptacle as shown in sketch B if a properly
grounded outlet is not available. The temporary adapter should be used only until a properly grounded outlet can be installed by
a qualified electrician. The green-colored rigid ear, lug, and the like, extending from the adapter must be connected to a
permanent ground such as a properly grounded outlet box.
4
Table 1
Minimum gage for cord a
Product specificaties
| Merk: | Tecomec |
| Categorie: | Overig |
| Model: | TL136 Jolly |
Heb je hulp nodig?
Als je hulp nodig hebt met Tecomec TL136 Jolly stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Overig Tecomec
8 Januari 2023
8 Januari 2023
8 Januari 2023
8 Januari 2023
8 Januari 2023
8 Januari 2023
8 Januari 2023
8 Januari 2023
8 Januari 2023
Handleiding Overig
- Overig Bosch
- Overig Panasonic
- Overig AEG
- Overig DeWalt
- Overig Karcher
- Overig WOLF-Garten
- Overig Airpress
- Overig Al-ko
- Overig Alpina
- Overig Altrex
- Overig Ateq
- Overig Atika
- Overig Bartec
- Overig Batavia
- Overig Black Decker
- Overig Blucave
- Overig Bort
- Overig Bostitch
- Overig Brandson
- Overig Brennenstuhl
- Overig Bruder Mannesmann
- Overig DAP
- Overig Datona
- Overig Defort
- Overig Digi
- Overig Dollken-Weimar
- Overig Dolmar
- Overig Dremel
- Overig Dunlop
- Overig Duro
- Overig Easymaxx
- Overig Einhell
- Overig Eliet
- Overig Emco
- Overig Ergofix
- Overig Fein
- Overig Ferm
- Overig Ferrex
- Overig Festool
- Overig Flex
- Overig Flowserve
- Overig Fuxtec
- Overig Gamma
- Overig Gloria
- Overig Greenworks
- Overig Grizzly
- Overig Gude
- Overig Gude Pro
- Overig Heidenhain
- Overig Hikoki
- Overig Hitachi
- Overig Hofmann
- Overig Holzmann
- Overig Husqvarna
- Overig Huvema
- Overig Hyundai
- Overig Ideen Welt
- Overig IntelliFlo
- Overig Komatsu
- Overig Kompernass
- Overig Kraft
- Overig Laserliner
- Overig Logilink
- Overig Lotus
- Overig Makita
- Overig Max
- Overig Maxicool
- Overig Milwaukee
- Overig NDS
- Overig Numatic
- Overig Parkside
- Overig PLS - Fluke
- Overig Powerfix
- Overig Powerfix Profi
- Overig Powerplus
- Overig Rawlink
- Overig Renovator
- Overig Rupes
- Overig Ryobi
- Overig Scheppach
- Overig Sievert
- Overig Skil
- Overig Sparky
- Overig Spero
- Overig Stanley
- Overig Stihl
- Overig Stomer
- Overig Topcraft
- Overig Triton
- Overig Tronic
- Overig Turbotech
- Overig Turbotronic
- Overig Varo
- Overig Voltcraft
- Overig Vonroc
- Overig Wagner
- Overig Workzone
- Overig Worx
- Overig Xenteq
- Overig Zodiac
- Overig OKAY
- Overig Omega
- Overig Oregon
- Overig Proxxon
- Overig Probuilder
- Overig MSW
- Overig Kyoritsu
- Overig Sola
- Overig Mac Allister
- Overig Max Bahr
- Overig Maxxtools
Nieuwste handleidingen voor Overig
5 Februari 2024
14 Januari 2024
14 Januari 2024
8 Januari 2024
10 December 2023
10 December 2023
10 December 2023
10 December 2023
10 December 2023
10 December 2023