Tecmate Optimate 4 Dual Program Handleiding

Tecmate Batterij-oplader Optimate 4 Dual Program

Lees hieronder de 📖 handleiding in het Nederlandse voor Tecmate Optimate 4 Dual Program (30 pagina's) in de categorie Batterij-oplader. Deze handleiding was nuttig voor 218 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/30
Automatic charger for 12V lead-acid batteries
• Chargeur automatique pour batteries 12V
plomb-acide • Cargador automático para
baterías 12V plomo-ácido • Carregador
automático para baterias de 12V chumbo-
ácido • Automatische Ladegerät für 12V Blei-
Säure Batterien • Automatische lader voor 12V
loodzuur accu’s • Caricabatterie automatico
per batterie 12V piombo-acido • Automatisk
diagnostisk laddare för 12V blybatterier
1 x 12V
STD / AGM-MF / GEL
3 - 50Ah (max. Ah rating based
on 48 hour charge).
+ -
MODEL: TM340 / TM341 / TM342 / TM348
AC: 100 – 240V 50-60Hz
0.15A @ 240V / 0.28A @ 100V
DC: 12V 1A
INSTRUCTIONS FOR USE
IMPORTANT: Read completely
before charging
MODE D’EMPLOI
IMPORTANT: à lire avant
d’utiliser l’appareil
MODO DE EMPLEO
IMPORTANTE: a leer antes de
utilizar el aparato
ANWENDUNGSVORSCHRIFTEN
WICHTIG: Vollständig vor der
Benutzung lesen
GEBRUIKSAANWIJZING
BELANGRIJK: Lees volledig voor
gebruik
INSTRUÇÕES DE UTILIZAÇÃO
IMPORTANTE: Ler antes de
utilizar.
ISTRUZIONI PER L’USO
IMPORTANTE: da leggere prima
di utilizzare l’apparecchio
INSTRUKTIONER
VIKTIGT: läs följande fullständiga
instruktioner för användningen
innan du använder laddaren
PROGRAM 1 - STANDARD / DIRECT CHARGE : 9 STEPS
L Vow olt
Start (0.5V)
1 3
Controlled
CHARGE
6
OPTIMIZE
7
TEST after
CHARGE
8
OptiMate
‘365’
maintenance
95
Pulse
SAVE
4
SAVE
sulphated
battery
2
TEST
before charge
PULSE
‘wake up’
PROGRAM 2 - CAN-bus (BMW) : 8 STEPS
CAN-bus
‘wake up’
pulse
1 3
Controlled
CHARGE
5
CAN-bus
OPTIMIZE
6
CAN-bus
TEST after
CHARGE
7
OptiMate
‘365’
maintenance
84
Pulse
SAVE
2
TEST
before charge
CAN-bus
low volt
check
4
dual program
copyright © 2016 TecMate International – TM34x-IN1-161115
LEDs
TEST LEDs
MAINTAIN
CHARGE
SAVE
12V
7
8
34
6
5
2
1
765
80 100%604020AGM
100% 806040STD
76 6 5
0
0
CHARGE
48h max
MAINTAIN
365
SAVE
15m - 2h
TEST
30m - 12h
2: CAN-bus1: STD
TEST
10s
100-240Vac
2
5 5
Program LEDs
1
3 4
5
6
7
1 1 3 4
10 sec.
2. 5.3.1. 4.
Change program: Standard CAN-bus
2
3
4
dual program
IMPORTANT SAFETY
INSTRUCTIONS FOR CANADA & USA
THIS PORTION OF THE MANUAL CONTAINS IMPORTANT SAFETY INSTRUCTIONS FOR
THE OPTIMATE 4 BATTERY CHARGER. IT IS OF THE UTMOST IMPORTANCE THAT
EACH TIME, BEFORE USING THE CHARGER, YOU READ AND EXACTLY FOLLOW THESE
INSTRUCTIONS. SAVE THESE INSTRUCTIONS.
Automatic charger for 12V lead-acid batteries
DO NOT USE FOR NiCd, NiMH, Li-Ion OR NON-RECHARGEABLE BATTERIES.
1. CAUTION : CLASS II APPLIANCE. DO NOT CONNECT TO GROUND.
2. Do not expose charger to rain or snow.
3. Use of an attachment not recommended or sold by the battery charger manufacturer may result in a risk of fire, electric shock,
or injury to persons.
4. To reduce risk of damage to electric plug and cord, pull by plug rather than cord when disconnecting charger.
5. An extension cord should not be used unless absolutely necessary. Use of improper extension cord could result
in a risk of fire and electric shock. If extension cord must be used make sure that :
a) pins on plug of extension cord are the same number, size and shape as those of plug on charger.
b) the extension cord is properly wired and in good electrical condition, and
c) the conductor wire size is large enough for the AC ampere rating of the charger as specified in the table below.
AC INPUT RATING IN AMPERES
Equal to or greater than But less than
LENGTH OF CORD,
FEET (m)
AWG SIZE
OF CORD
2A 3A 25 (17.6)
50 (15.2)
100 (30.5)
18
18
14
6. Do not operate charger with damaged cord or plug – replace the cord or plug immediately.
7. Do not operate charger if it has received a sharp blow, been dropped,or otherwise damaged in any way;
take it to a qualified serviceman.
8. Do not disassemble charger; take it to a qualified serviceman when service or repair is required.
Incorrect reassembly may result in a risk of electric shock or fire.
9. To reduce risk of electric shock, unplug the charger from outlet before attempting any maintenance or cleaning.
Turning off controls will not reduce this risk.Clean only with slightly moist,not wet, cloth.Do not use solvents.
10. WARNING - RISK OF EXPLOSIVE GASES.
a) WORKING IN VICINITY OF A LEAD-ACID BATTERY IS DANGEROUS. BATTERIES GENERATE EXPLOSIVE GASES
DURING NORMAL BATTERY OPERATION. FOR THIS REASON, IT IS OF UTMOST IMPORTANCE THAT YOU FOLLOW THE
INSTRUCTIONS EACH TIME YOU USE THE CHARGER.
b) To reduce risk of battery explosion, follow these instructions and those published by the battery manufacturer
and manufacturer of any equipment you intend to use in vicinity of the battery. Review cautionary marking on
these products and on engine.
11. PERSONAL PRECAUTIONS.
a) Someone should be within range of your voice OR close enough to come to your aid when you work near a lead-acid battery.
b) Have plenty of fresh water and soap nearby in case battery acid contacts skin, clothing or eyes.
c) Wear complete eye protection and clothing protection. Avoid touching eyes while working near battery.
d) If battery acid contacts or enters eye, flood eye with cold running water for at least 10 minutes and get medical
attention immediately. If battery acid contacts skin or clothing, wash immediately with soap and water.
e) NEVER smoke or allow a spark or flame in vicinity of battery or engine.
f) Be extra cautious to reduce risk of dropping a metal tool onto battery. It might spark or short-circuit battery or other electrical
part that may cause explosion.
g) Remove personal metal items such as rings, bracelets, necklaces, and watches when working with a lead-acid
battery. A lead-acid battery can produce a short-circuit current high enough to weld a ring or the like to metal,
causing a severe burn.
i) NEVER charge a frozen battery.
SAFETY US & CAN

Product specificaties

Merk: Tecmate
Categorie: Batterij-oplader
Model: Optimate 4 Dual Program

Heb je hulp nodig?

Als je hulp nodig hebt met Tecmate Optimate 4 Dual Program stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Batterij-oplader Tecmate

Tecmate

Tecmate Optimate Lithium Handleiding

21 Juni 2023
Tecmate

Tecmate Optimate 2 Handleiding

18 Juni 2023
Tecmate

Tecmate Optimate 4 CAN-bus Handleiding

17 Juni 2023
Tecmate

Tecmate Optimate 7 Handleiding

21 Mei 2023
Tecmate

Tecmate Optimate 6 Ampmatic Handleiding

20 Mei 2023
Tecmate

Tecmate Optimate 3 Handleiding

20 Mei 2023
Tecmate

Tecmate Optimate Solar Handleiding

15 Mei 2023
Tecmate

Tecmate Optimate DC-DC Handleiding

14 Mei 2023
Tecmate

Tecmate Optimate 1 Handleiding

14 Mei 2023
Tecmate

Tecmate Optimate 4 Dual Program Handleiding

12 Mei 2023

Handleiding Batterij-oplader

Nieuwste handleidingen voor Batterij-oplader

Mophie

Mophie Snap+ powerstation Stand Handleiding

20 November 2024
Deye

Deye SUN-5K-SG03LP1-EU Handleiding

20 November 2024
Deye

Deye SUN2000G3-EU-230 Handleiding

20 November 2024
Deye

Deye SUN1600G3-EU-230 Handleiding

20 November 2024
APSystems

APSystems EZ1-M Handleiding

20 November 2024
Celly

Celly PC2TC20WUSBCCAB Handleiding

20 November 2024
Celly

Celly PC2TC20WLIGHTCA Handleiding

19 November 2024
Celly

Celly PC2TCUSBA20WWH Handleiding

19 November 2024
Celly

Celly GHOSTSUPERMAGCH Handleiding

19 November 2024
Celly

Celly GHOSTMAGCHARGE Handleiding

19 November 2024