Teac CR-H238I S Handleiding

Teac Receiver CR-H238I S

Lees hieronder de 📖 handleiding in het Nederlandse voor Teac CR-H238I S (118 pagina's) in de categorie Receiver. Deze handleiding was nuttig voor 115 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/118

ENGLISH

CR-H238i

Z7202-090600301

CD Receiver

OWNER'S MANUAL

MODE D’EMPLOI

MANUAL DEL USUARIO

FRANÇAIS ESPAÑOL

The lightning flash with arrowhead symbol,

within an equilateral triangle, is intended to

alert the user to the presence of uninsulated

“dangerous voltage” within the product's

enclosure that may be of sufficient magnitude

to constitute a risk of electric shock to persons.

The exclamation point within an equilateral

triangle is intended to alert the user to the

prese nce of impo rt ant o perating and

maintenance (servicing) instructions in the

literature accompanying the appliance.

10) Protect the power cord from being walked

on or pinched particularly at plugs, convenience

receptacles, and the point where they exit from the

apparatus.

11) Only use attachments/accessories specified by the

manufacturer.

12) Use only with the cart, stand,

tripod, bracket, or table specified

by the manufacturer, or sold with

the apparatus. When a cart is

used, use caution when moving

the cart/apparatus combination

to avoid injury from tip-over.

13) Unplug this apparatus during lightning storms or

when unused for long periods of time.

14) Refer all servicing to qualified service personnel.

Servicing is required when the apparatus has been

damaged in any way, such as power-supply cord or

plug is damaged, liquid has been spilled or objects

have fallen into the apparatus, the apparatus has

been exposed to rain or moisture, does not operate

normally, or has been dropped.

< Do not expose this apparatus to drips or splashes.

< Do not place any objects filled with liquids, such as

vases, on the apparatus.

< Do not install this apparatus in a confined space such

as a bookcase or similar unit.

< The apparatus draws nominal non-operating power

from the AC outlet with its POWER or STANDBY/ON

switch not in the ON position.

< The apparatus should be located close enough to the

AC outlet so that you can easily grasp the power cord

plug at any time.

< The mains plug is used as the disconnect device, the

disconnect device shall remain readily operable.

< If the product uses batteries (including a battery pack

or installed batteries), they should not be exposed to

sunshine, fire or excessive heat.

< Caution should be taken when using earphones or

headphones with the product because excessive

sound pressure (vo lume) from e arphone s or

headphones can cause hearing loss.

IMPORTANT SAFETY

INSTRUCTIONS

1) Read these instructions.

2) Keep these instructions.

3) Heed all warnings.

4) Follow all instructions.

5) Do not use this apparatus near water.

6) Clean only with dry cloth.

7) Do not block any ventilation openings. Install in

accordance with the manufacturer's instructions.

8) Do not install near any heat sources such as radiators,

heat registers, stoves, or other apparatus (including

amplifiers) that produce heat.

9) Do not defeat the safety purpose of the polarized or

grounding-type plug. A polarized plug has two blades

with one wider than the other. A grounding type plug

has two blades and a third grounding prong. The

wide blade or the third prong are provided for your

safety. If the provided plug does not fit into your

outlet, consult an electrician for replacement of the

obsolete outlet.

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,

DO NOT REMOVE COVER (OR BACK). NO USER-

SERVICEABLE PARTS INSIDE. REFER SERVICING TO

QUALIFIED SERVICE PERSONNEL.

WA RN I N G : T O PR E VE N T F I R E OR

SHOCK HAZARD, DO NOT EXPOSE THIS

APPLIANCE TO RAIN OR MOISTURE.

CAUTION

< DO NOT REMOVE THE EXTERNAL CASES OR CABINETS

TO EXPOSE THE ELECTRONICS. NO USER SERVICEABLE

PARTS ARE WITHIN!

< IF YOU ARE EXPERIENCING PROBLEMS WITH THIS

PRODUCT, CONTACT TEAC FOR A SERVICE REFERRAL.

DO NOT USE THE PRODUCT UNTIL IT HAS BEEN

REPAIRED.

< US E O F C O NT RO L S O R AD JU S TM E N T S O R

PERFORMANCE OF PROCEDURES OTHER THAN THOSE

SPECIFIED HEREIN MAY RESULT IN HAZARDOUS

RADIATION EXPOSURE.

For U.S.A.

This equipment has been tested and found to

comply with the limits for a Class B digital device,

pursuant to Part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against

harmful interference in a residential installation. This

equipment generates, uses, and can radiate radio

frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful

interference to radio communications. However, there

is no guarantee that interference will not occur in a

particular installation. If this equipment does cause

harmful interference to radio or television reception,

which can be determined by turning the equipment

off and on, the user is encouraged to try to correct

the interference by one or more of the following

measures:

< Reorient or relocate the equipment and/or the

receiving antenna.

< Increase the separation between the equipment

and receiver.

< Connect the equipment into an outlet on a

circuit different from that to which the receiver is

connected.

< Consult the dealer or an experienced radio/TV

technician for help.

CAUTION

Changes or modifications to this equipment not

expressly approved by TEAC CORPORATION for

compliance will void the user’s warranty.

This product has been designed and manufactured

according to FDA regulations “title 21, CFR, chapter 1,

subchapter J, based on the Radiation Control for Health

and Safety Act of 1968”, and is classified as class 1 laser

product. There is not hazardous invisible laser radiation

during operation because invisible laser radiation emitted

inside of this product is completely confined in the

protective housings.

The label required in this regulation is shown as follows.

Optical pickup :

Type : SF-P101VF

Manufacturer : Sanyo Electric Co., Ltd

Laser output : Less than 1mW on the objective lens

Wavelength : 790±30nm

MPEG Layer-3 audio coding technology licensed from

Fraunhofer IIS and Thomson.

This product is protected by certain intellectual property

rights of Microsoft. Use or distribution of such technology

outside of this product is prohibited without a license

from Microsoft.

“Made for iPod” means that an electronic accessory

has been designed to connect specifically to iPod and

has been certified by the developer to meet Apple

performance standards.

Apple is not responsible for the operation of this device

or its compliance with safety and regulatory standards.

Apple and iPod are trademarks of Apple Inc., registered in

the U.S. and other countries.

iPhone is a trademark of Apple Inc.

SDHC Logo is a trademark of SD-3C, LLC.

Product specificaties

Merk:	Teac
Categorie:	Receiver
Model:	CR-H238I S
Kleur van het product:	Zilver
Gewicht:	4200 g
Type aansluitplug:	3,5 mm
Connectiviteitstechnologie:	Bedraad
Hoofdtelefoonuitgangen:	1
Digitale audio, optische uitgang:	1
Aansluitingen:	USB, SD, 1 Ipod(18 pin)
Uitgangsvermogen:	25W + 25W
Impedantie:	6 Ohm
Audio-uitgangskanalen:	2.1 kanalen
Frequentiebereik:	20000 - 30000 Hz
Signaal/ruis-verhouding:	86 dB
Ondersteunde frequentiebanden:	AM, DAB, FM
Afmetingen (B x D x H):	215 x 359 x 110 mm
Inclusief RDS tuner:	Ja
Totale harmonische vervorming (THD):	0.5 procent