KanexPro SP-1X16SL18G Handleiding

KanexPro Receiver SP-1X16SL18G

Lees hieronder de šŸ“– handleiding in het Nederlandse voor KanexPro SP-1X16SL18G (7 pagina's) in de categorie Receiver. Deze handleiding was nuttig voor 4 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/7
1x16 HDMI 2.0 Splitter with
Downscaling
MPN: SP-1X16SL18G
VER. SUH116-H2_2021V1.2
All brand names and trademarks are properties of their respective owners
2
Safety Precaution
ā€¢ Do not dismantle the housing or modify the module to avoid
electrical shock or burn.
ā€¢ Using supplies not meeting the productsā€™ speciļ¬cations may cause
damage, deterioration or malfunction.
ā€¢ Do not expose the unit to rain, moisture or install this product near
water.
ā€¢ Install the device in a place with ļ¬ne ventilation.
ā€¢ Do not twist or pull by force ends of the optical cable. It can cause
malfunction.
ā€¢ Do not use liquid or aerosol cleaners to clean this unit.
ā€¢ Always unplug the power to the device before cleaning.
ā€¢ Unplug the power when not used for a long period of time.
ā€¢ Refer all servicing to qualiļ¬ed service personnel.
After-sales Service
KanexPro provides a 3 year limited warranty for this product. Please
reach out to support@kanexpro.com for additional details.
Table of Contents
1. Introduction. 3
2. Features. 3
3. Package Contents. 3
4. Panel Description. 4
5. Dip Switch Operation. 6
6. RS232 Control. 7
6.1 System Commands 8
6.2 Setting Commands 8
7. Firmware Upgrade. 10
8. System Connection. 10
9. Technical Speciļ¬cations. 11
1. Introduction
4
4. PANEL DESCRIPTION:
Front Panel
ā‘  POWER SWITCH: Power on/off the splitter.
ā‘” POWER LED: The LED illuminates red when power is applied.
ā‘¢ INPUT LED: The LED illuminates green when there is HDMI input.
ā‘£ OUTPUT LEDs (1-16): The LED illuminates green when there is
HDMI output on the corresponding channel.
ā‘¤ EDID: 4-pin DIP switch for EDID setting and HDCP mode selection.
Please refer to the chapter DIP Switch Operation for more details.
ā‘„ FW: Micro-USB port for ļ¬rmware upgrade.
12 3 45 6
INPUT 1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16 12 34
EDID
1
0
ON
OFF
FW
ON
OFF


Product specificaties

Merk: KanexPro
Categorie: Receiver
Model: SP-1X16SL18G

Heb je hulp nodig?

Als je hulp nodig hebt met KanexPro SP-1X16SL18G stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Receiver KanexPro

Handleiding Receiver

Nieuwste handleidingen voor Receiver