TAIDEN HCS-8316SDI Handleiding

TAIDEN Server HCS-8316SDI

Lees hieronder de 📖 handleiding in het Nederlandse voor TAIDEN HCS-8316SDI (15 pagina's) in de categorie Server. Deze handleiding was nuttig voor 38 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/15

HCS-8316 Series Encoder

Excellent solutions for conferences

Installation and Operation Manual

V 1.0

Remark:

 Contents may change without prior announcement

 All technical specifications are guideline data and not guaranteed features

 Taiden Co., Ltd. is not responsible for any damage caused by improper use of this manual

 The equipment must be connected to earth!

 This product conforms to the rules of the European directive 2004/108/EC.

 If any detailed information needed, please contact your local agent or TAIDEN service center in your region.

Any feedback, advice and suggestion about the products is appreciated

 TAIDEN is the registered trademark of TAIDEN Co., Ltd.

Important Safety Instruction

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. The apparatus shall not be exposed to dripping or

splashing and that no objects filled with liquids, such

as vases, shall be placed on the apparatus.

6. The MAINS plug serving as a disconnection device,

should be easy to operate.

7. The apparatus should be connected to the MAINS

socket-outlet with protective earth.

8. Clean only with dry cloth.

9. Do not block any ventilation openings. Install in

accordance with the manufacturer’s instructions.

10. Do not install near any heat sources such as radiators,

heat registers, stoves, or other apparatus (including

amplifiers) that produce heat.

11. Do not defeat the safety purpose of the polarized or

grounding-type plug. A polarized plug has two blades

with one wider than the other. A grounding type plug

has two blades and a third grounding prong. The wide

blade and the third prong are provided for your safety.

If the provided plug does not fit into your outlet,

consult an electrician for replacement of the obsolete

outlet.

12. Protect the power cord from being walked on or

pinched particularly at plugs, convenience

receptacles, and the point where they exit from the

apparatus.

13. Only use attachments/accessories specified by the

manufacturer.

14. Use only with the cart, stand, tripod, bracket, or table

specified by the manufacturer, or sold with the

apparatus. When a cart is used, use caution when

moving the cart/apparatus combination to avoid injury

from tip-over.

15. Unplug this apparatus during lightning storms or

when unused for long periods of time.

16. Refer all servicing to qualified service personnel.

Servicing is required when the apparatus has been

damaged in any way, such as power-supply cord or

plug is damaged, liquid has been spilled or objects

have fallen into the apparatus, the apparatus has

been exposed to rain or moisture, does not operate

normally, or has been dropped.

17. Do not place the equipment on any uneven or

unstable stand; original product package or

appropriate package should be used to avoid damage

caused by strong impacts during transportation.

18. Power supply cords:

AC 100 V-120 V 60 Hz or AC 220 V-240 V 50 Hz

19. For service, please contact the nearest TAIDEN

Service Center.

20. All TAIDEN products are guaranteed for definite time

(see the WARRANTY CARD for details) excluding the

following cases:

A. All damage or malfunction caused by human

negligence;

B. Damage or malfunction caused by improper

operating by operator;

C. Parts damage or loss caused by disassembling

the product by non-authorized personnel.

21. Use ONLY specified connection cable to connect the

system equipment.

22. Upon receipt of the product, please fill out the

Warranty Card enclosed and post it to TAIDEN

Service Center.

CAUTION: To reduce the risk of electric shock,

DO NOT open covers, no user serviceable parts

inside. Refer servicing to qualified service

personnel only.

CAUTION: DO NOT use alcohol, ammonia or

petroleum solvents or abrasive cleaners to

clean the devices.

The lightning flash with an arrowhead symbol, with

an equilateral triangle, is intended to alert the user

to the presence of uninsulated ‘dangerous voltage’

within the products enclosure that may be of

sufficient magnitude to constitute a risk of electric

shock to persons.

The exclamation mark within an equilateral triangle

is intended to alert the user to the presence of

important operating and maintenance (servicing)

instructions in the literature accompanying the

appliance.

Product specificaties

Merk:	TAIDEN
Categorie:	Server
Model:	HCS-8316SDI
Kleur van het product:	Grijs
Gewicht:	2700 g
Breedte:	483 mm
Diepte:	208 mm
Hoogte:	43 mm
LED-indicatoren:	Ja
Maximale beeldsnelheid:	- fps
Aantal Ethernet LAN (RJ-45)-poorten:	1
Maximale videoresolutie:	1920 x 1080 Pixels
RS-232 port:	1
PTZ control:	Nee
Stroomverbruik (typisch):	10 W