Swann SWADS-WVDCM1 Handleiding

Swann Deurbel SWADS-WVDCM1

Lees hieronder de 📖 handleiding in het Nederlandse voor Swann SWADS-WVDCM1 (2 pagina's) in de categorie Deurbel. Deze handleiding was nuttig voor 42 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/2

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and (2) this device must accept any interference received,

including interference that may cause undesired operation.

WARNING: Modiﬁcations not approved by the party responsible for compliance could void user’s authority to

operate the equipment.

Battery Safety Information

Replace batteries at the same time. Do not mix new and old batteries or battery types (for example, alkaline and

lithium batteries). Keep batteries out of reach of children. Dispose of used batteries promptly in accordance

with local regulations.

CE marking on this product represents the product is in compliance with all directives that are applicable to it.

Correct Disposal of This Product. This marking indicates that this product should not be disposed with

other household wastes throughout the EU. To prevent possible harm to the environment or human

health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of

material resources. To return your used device, please use the return and collection systems or contact the

retailer where the product was purchased. They can take this product for environment safe recycling.

QSGWVDPCMVER1E

ENGLISH

Chime Accessory

QUICK START GUIDE

For Smart Video Doorbell Security System

Chime Overview Chime Setup

LED light

Chime melody button

(36 melodies available)

Pairing button

Volume button

Speaker (back)

Battery cover (back)

The Chime accessory is a battery-powered indoor speaker that monitors for signals coming

from your Smart Video Doorbell, and plays a melody when the front button of your Smart

Video Doorbell is pressed.

VOL CODE

Installing batteries & Pairing the Chime

1. To install batteries, open the battery cover on the back of the Chime and insert two

new, high quality "AA" alkaline batteries, matching the polarity markings (+ and -)

shown inside the battery compartment. Snap the battery cover back into place.

2. To pair with your Smart Video Doorbell, brieﬂy press the Chime's button, and CODE

then press the button on the front of your Smart Video Doorbell within 10 seconds.

You'll hear the default chime melody as conﬁrmation.

Melody selection

To select a different melody, press the button repeatedly to cycle through all the available

sounds. Stop when you hear something you like. There is no need to conﬁrm your selection.

Volume control

To adjust the volume, press the button repeatedly until the desired volume is obtained. VOL

You can also completely turn off both sound and LED light.

Mounting the Chime

1. Insert the supplied screw (depending on the surface type, use a wall plug if needed)

into the wall at the desired location, leaving it protruding slightly.

2. Hang the Chime on the screw through the keyhole slot on the back of the Chime and

then slide the Chime down to ensure it sits ﬁrmly on the screw.

Product specificaties

Merk:	Swann
Categorie:	Deurbel
Model:	SWADS-WVDCM1
Kleur van het product:	Grey,White
Gewicht:	71 g
Breedte:	65 mm
Diepte:	28 mm
Hoogte:	105 mm
Type stroombron:	Batterij/Accu
Indicatielampje:	Ja
Ondersteund aantal accu's/batterijen:	2
Volumeregeling:	Ja
Maximumbereik:	20 m
Type batterij:	AA
Aantal belvolumeniveaus:	3
Regelbaar volume:	Ja
Verbindingstype:	Draadloos