SureFire XSC Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor SureFire XSC (6 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 103 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/6
MICRO-COMPACT HANDGUN LIGHT
XSC-A
USER MANUAL
Revision A 08-2020
71-01-1100
XSC-A
18300 MT. BALDY CIRCLE
FOUNTAIN VALLEY, CA 92708-6122
WWW.SUREFIRE.COM
Patent: 9,551,550
THE SUREFIRE NO-HASSLE GUARANTEE
We’ll do what it takes to keep your SureFire gear running smoothly.
SureFire warrants that if you our customer purchase one
of our products, and we determine that it is defective in material
and/or workmanship during your lifetime, we will repair or replace
it — no hassle!
Our warranty does not cover consumables or normal wear-and-tear
things like batteries draining, headbands and headpads wearing
out, ink cartridges running out, and switches wearing out or
damage resulting from abuse, alterations, unauthorized repairs, or
use contrary to SureFire’s user manuals.
Should you need a replacement product, SureFire reserves the
right to replace an obsolete product with a current production,
like model. In the event that any issue with a SureFire product is
not covered under this warranty SureFire can arrange to have the
product repaired for a reasonable fee.
STANDARD DISCLAIMER
Except as specified above or prohibited by applicable law: all express
or implied conditions and warranties, including, without limitation,
any implied warranty or condition of merchantability or fitness for
a particular purpose, or accuracy of any informational content, are
hereby excluded and disclaimed by SureFire; and in no event will
SureFire be liable for any special, direct, indirect, consequential,
incidental or punitive damages howsoever arising and regardless
of the theory of liability, even if advised of the possibility of such
damages. Products, prices, availability, specifications, and offers
are subject to change or cancellation at any time without notice.
WARRANTY CLAIMS
For claims, contact Customer Service at 714-545-9444 to obtain a
Return Merchandise Authorization number (RMA#). Then package
the unit carefully and send to (no CODs):
SureFire, LLC.
Repairs Department, RMA#____
17680 Newhope Street, Suite B
Fountain Valley, CA 92708
SureFire will pay any reasonable shipping costs to return the unit to you.
XSC-A
OUTPUT 350 lumens
RUNTIME 30 minutes
PEAK BEAM INTENSITY 2,000 candela
DISTANCE 90 meters
CONSTRUCTION Aluminum
FINISH Mil-Spec Hard Anodized
WEIGHT (w/batteries) 1.7 ounces / 48.2 g
LENGTH 1.94 inches / 4.9 cm
BEZEL DIAMETER 0.78 inches / 1.9 cm
BATTERIES One proprietary rechargeable lithium polymer 3.7V battery
SWITCHING Ambidextrous momentary/constant
All performance claims tested to ANSI/NEMA FL1-2009 Standard.
SPECIFICATIONS
B12 (XSC BATTERY) RATING/PERFORMANCE
TYPE Lithium Polymer w/PCM
and fuel gauge
VOLTAGE 3.7V
CERTIFICATION UN38.3
CHARGE END VOLTAGE 4.2V
DISCHARGE END VOLTAGE 2.7V
ENERGY 0.74Wh
LITHIUM CONTENT 0.06g
OPERATING TEMP RANGE
(Charging) 0-45C
OPERATING TEMP RANGE
(Discharging) -10--65C
RATED CAPACITY 200mAh
STANDARD CHARGE RATE 0.5C
STORAGE TEMP RANGE -10-45C
USB CHARGE CURRENT 100mA
USB CHARGE VOLTAGE 5V
WEIGHT 11.5g
BATTERY PACK SPEC TABLE:
FIGURE 4
KIT CONTENTS:
• XSC-A WeaponLight
• B12 Lithium Polymer Battery
• CH21 Cradle Charger
• MICRO-USB to USB Cable
MOUNTING XSC TO A HANDGUN
BATTERY INSTALLATION
Position battery below XSC and insert until it clicks into place (Figure 3).
BATTERY REMOVAL
Press battery latch lock forward toward the direction of the beam
and then pull the battery downward (Figure 4).
LIGHT OPERATION
The XSC is designed to allow support-hand activation in both
momentary-on and constant-on modes when firing right- or
left-handed.
TOGGLE SWITCHING
Momentary-on activation Depress and hold either toggle
switch for more than a tenth of a second or as long as needed to
momentarily activate the XSC. Release to turn off. (Figure 6).
Constant-on activation with toggle switches: The XSC is
programmed for constant-on activation by a quick tap and
release action via either toggle switches. (Figure 6).
NOTE: The light will not activate when rear switches are
pushed upward or side-to-side. This intentional design feature
minimizes unintended activation when drawing or holstering.
MAINTENANCE
Use a clean, dry cloth to wipe off body and window.
For additional tips on maintaining your SureFire illumination tool,
visit www.surefire.com/faqs-maintenance.
ACCESSORIES
SureFire makes a full line of accessories for most of its
illumination tools. For a complete listing,
visit www.surefire.com/partsaccessories.
1. Loosen Rail-Adjustment Bolt by turning counterclockwise to adjust
gap between stationary and movable Rail Guide until gap is suf-
ficiently wide to fit over weapon accessory rail (Figure 1).
2. Align Fixed Rail with weapon’s accessory rail and hinge XSC over the
cross slot of host weapon.
3. Mate Crossmember with slot in weapon’s accessory rail (Figure 2).
4. Tighten Rail-Adjustment Bolt clockwise hand tight then use a coin or
flat head screw driver to further tighten bolt no more than a 1/4 turn.
Do NOT overtighten!
FIGURE 5
FIGURE 1
CROSS
MEMBER
FIGURE 3
BATTERY
LATCH
LOCK
FUEL GAUGE LED INDICATOR
LEDS BATTERY CAPACITY
0-15%
16-50%
51-80%
81-100%
= blinking = off = on
BATTERY CHARGING
The B12 battery needs to be removed from the XSC and placed into
the CH21 battery charger to charge.
HOW TO CHARGE THE BATTERY
1. Insert the MICRO-USB cable plug into the CH21 battery charger.
2. Insert the USB cable plug into a power source.
3. Insert the B12 battery into the CH21 charger (Figure 5).
NOTE: The three fuel gauge LEDs on the side of the battery
will illuminate according to the chart below while charging
and discharging.
FIGURE 6
FIGURE 2
RAIL-ADJUSTMENT
BOLT
PUSH FORWARD
OR DOWN
TO ACTIVATE
MOMENTARY-ON
QUICKLY TAP AND RELEASE
TO ACTIVATE CONSTANT-ON
3 LEDS/
FUEL GAUGE
BEAM
DIRECTION
SLIDE BATTERY LATCH LOCK
FORWARD TO REMOVE B12 BATTERY
MICRO-COMPACT HANDGUN LIGHT
XSC-HELLCAT
USER MANUAL
Revision A 08-2020
71-01-1117
XSC-HELLCAT
18300 MT. BALDY CIRCLE
FOUNTAIN VALLEY, CA 92708-6122
WWW.SUREFIRE.COM
Patent: 9,551,550
THE SUREFIRE NO-HASSLE GUARANTEE
We’ll do what it takes to keep your SureFire gear running smoothly.
SureFire warrants that if you our customer purchase one
of our products, and we determine that it is defective in material
and/or workmanship during your lifetime, we will repair or replace
it — no hassle!
Our warranty does not cover consumables or normal wear-and-tear
things like batteries draining, headbands and headpads wearing
out, ink cartridges running out, and switches wearing out or
damage resulting from abuse, alterations, unauthorized repairs, or
use contrary to SureFire’s user manuals.
Should you need a replacement product, SureFire reserves the
right to replace an obsolete product with a current production,
like model. In the event that any issue with a SureFire product is
not covered under this warranty SureFire can arrange to have the
product repaired for a reasonable fee.
STANDARD DISCLAIMER
Except as specified above or prohibited by applicable law: all express
or implied conditions and warranties, including, without limitation,
any implied warranty or condition of merchantability or fitness for
a particular purpose, or accuracy of any informational content, are
hereby excluded and disclaimed by SureFire; and in no event will
SureFire be liable for any special, direct, indirect, consequential,
incidental or punitive damages howsoever arising and regardless
of the theory of liability, even if advised of the possibility of such
damages. Products, prices, availability, specifications, and offers
are subject to change or cancellation at any time without notice.
WARRANTY CLAIMS
For claims, contact Customer Service at 714-545-9444 to obtain a
Return Merchandise Authorization number (RMA#). Then package
the unit carefully and send to (no CODs):
SureFire, LLC.
Repairs Department, RMA#____
17680 Newhope Street, Suite B
Fountain Valley, CA 92708
SureFire will pay any reasonable shipping costs to return the unit to you.
XSC-HELLCAT
OUTPUT 350 lumens
RUNTIME 30 minutes
PEAK BEAM INTENSITY 2,000 candela
DISTANCE 90 meters
CONSTRUCTION Aluminum
FINISH Mil-Spec Hard Anodized
WEIGHT (w/batteries) 1.7 ounces / 48.2 g
LENGTH 1.94 inches / 4.9 cm
BEZEL DIAMETER 0.78 inches / 1.9 cm
BATTERIES One proprietary rechargeable lithium polymer 3.7V battery
SWITCHING Ambidextrous momentary/constant
All performance claims tested to ANSI/NEMA FL1-2009 Standard.
SPECIFICATIONS
B12 (XSC BATTERY) RATING/PERFORMANCE
TYPE Lithium Polymer w/PCM
and fuel gauge
VOLTAGE 3.7V
CERTIFICATION UN38.3
CHARGE END VOLTAGE 4.2V
DISCHARGE END VOLTAGE 2.7V
ENERGY 0.74Wh
LITHIUM CONTENT 0.06g
OPERATING TEMP RANGE
(Charging) 0-45C
OPERATING TEMP RANGE
(Discharging) -10--65C
RATED CAPACITY 200mAh
STANDARD CHARGE RATE 0.5C
STORAGE TEMP RANGE -10-45C
USB CHARGE CURRENT 100mA
USB CHARGE VOLTAGE 5V
WEIGHT 11.5g
BATTERY PACK SPEC TABLE:


Product specificaties

Merk: SureFire
Categorie: Niet gecategoriseerd
Model: XSC

Heb je hulp nodig?

Als je hulp nodig hebt met SureFire XSC stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd SureFire

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd