Supermicro X8DAH+ Handleiding


Lees hieronder de šŸ“– handleiding in het Nederlandse voor Supermicro X8DAH+ (103 pagina's) in de categorie Moederborden. Deze handleiding was nuttig voor 50 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/103
USERā€™S MANUAL
Revision 1.0c
X8DAH+-F
X8DAH+
Manual Revision 1.0c
Release Date: April 26, 2010
Unless you request and receive written permission from Super Micro Computer, Inc., you may not
copy any part of this document.
Information in this document is subject to change without notice. Other products and companies
referred to herein are trademarks or registered trademarks of their respective companies or mark
holders.
Copyright Ā© 2010 by Super Micro Computer, Inc.
All rights reserved.
Printed in the United States of America
The information in this Userā€™s Manual has been carefully reviewed and is believed to be accurate.
The vendor assumes no responsibility for any inaccuracies that may be contained in this document,
makes no commitment to update or to keep current the information in this manual, or to notify any
person or organization of the updates. Please Note: For the most up-to-date version of this
manual, please see our website at www.supermicro.com.
Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product
described in this manual at any time and without notice. This product, including software and docu-
mentation, is the property of Supermicro and/or its licensors, and is supplied only under a license.
Any use or reproduction of this product is not allowed, except as expressly permitted by the terms
of said license.
IN NO EVENT WILL SUPER MICRO COMPUTER, INC. BE LIABLE FOR DIRECT, INDIRECT,
SPECIAL, INCIDENTAL, SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE
USE OR INABILITY TO USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF
THE POSSIBILITY OF SUCH DAMAGES. IN PARTICULAR, SUPER MICRO COMPUTER, INC.
SHALL NOT HAVE LIABILITY FOR ANY HARDWARE, SOFTWARE, OR DATA STORED OR USED
WITH THE PRODUCT, INCLUDING THE COSTS OF REPAIRING, REPLACING, INTEGRATING,
INSTALLING OR RECOVERING SUCH HARDWARE, SOFTWARE, OR DATA.
Any disputes arising between manufacturer and customer shall be governed by the laws of Santa
Clara County in the State of California, USA. The State of California, County of Santa Clara shall be
the exclusive venue for the resolution of any such disputes. Supermicro's total liability for all claims
will not exceed the price paid for the hardware product.
FCC Statement: This equipment has been tested and found to comply with the limits for a Class
A digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the manufacturerā€™s instruction manual, may cause harmful
interference with radio communications. Operation of this equipment in a residential area is likely
to cause harmful interference, in which case you will be required to correct the interference at your
own expense.
California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate
warning applies only to products containing CR (Manganese Dioxide) Lithium coin cells. ā€œPerchlorate
Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorateā€.
WARNING: Handling of lead solder materials used in this
product may expose you to lead, a chemical known to
the State of California to cause birth defects and other
reproductive harm.
Preface
About this Manual
This manual is written for system integrators, PC technicians and knowledgeable PC
users. It provides information for the installation and use of the X8DAH+/
X8DAH+-F motherboard.
About this Motherboard
The X8DAH+/X8DAH+-F supports the IntelĀ® 5500/5600 Series Proces-
sor platform, the ļ¬ rst dual-processing platform that supports the Intel QuickPath
Interconnect (QPI) Technology, providing the next generation point-to-point system
interface to replace the current Front Side Bus. With the Intel 5520 chipset built in,
the X8DAH+/X8DAH+-F substantially enhances system performance with increased
bandwidth and unprecedented scalability optimized for HPC/Cluster systems and
intensive applications. Please refer to our website (http://www.supermicro.com/
products/) for updates on supported processors. This product is intended to be
installed and serviced by professional technicians.
Manual Organization
Chapter 1 describes the features, speciļ¬ cations and performance of the mother-
board and provides detailed information about the chipset.
Chapter 2 provides hardware installation instructions. Read this chapter when in-
stalling the processor, memory modules and other hardware components into the
system. If you encounter any problems, see , which describes trouble-Chapter 3
shooting procedures for video, memory and system setup stored in the CMOS.
Chapter 4 includes an introduction to the BIOS and provides detailed information
on running the CMOS Setup utility.
Appendix A . Appendix Blists BIOS POST Error Codes and Appendix C provide
the Windows OS and Other Software Installation Instructions.
iii
Preface


Product specificaties

Merk: Supermicro
Categorie: Moederborden
Model: X8DAH+
Breedte: 347 mm
Diepte: 330 mm
Type stroombron: ATX
Aantal USB 2.0-poorten: 10
Aantal Ethernet LAN (RJ-45)-poorten: 2
Processor socket: Socket B (LGA 1366)
Processorfabrikant: Intel
Maximum intern geheugen: 192 GB
ECC: Ja
Chipset moederbord: IntelĀ® 5520
Aantal IEEE 1394-/Firewire-poorten: 2
PCI Express x16 slots: 2
PS/2 poort(en): 2
Seriƫle poort(en): 2
PCI Express x8 slots: 4
PCI Express x4 slots: 1
LAN controller: IntelĀ® 82576
Soorten RAID: 0, 1,10
Non-ECC: Ja
Bedrijfstemperatuur (T-T): 10 - 35 Ā°C
Relatieve vochtigheid in bedrijf (V-V): 8 - 90 procent
Moederbord form factor: Verlengd ATX
Grootte BIOS-geheugen: 32 Mbit
Aantal SATA-aansluitingen: 6
USB 2.0 aansluitingen: 10
Aansluiting voor diskettestation: Ja
IEEE1394 aansluitingen: 2
Soort aansluiting controller: SATA
CF card connector: Ja

Heb je hulp nodig?

Als je hulp nodig hebt met Supermicro X8DAH+ stel dan hieronder een vraag en andere gebruikers zullen je antwoorden