Supermicro X10SLQ-L Handleiding

Supermicro Moederborden X10SLQ-L

Lees hieronder de 📖 handleiding in het Nederlandse voor Supermicro X10SLQ-L (113 pagina's) in de categorie Moederborden. Deze handleiding was nuttig voor 46 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/113

X10SLQ

X10SLQ-L

USER’S MANUAL

Revision 1.0a

The information in this User’s Manual has been carefully reviewed and is believed to be accurate.

The vendor assumes no responsibility for any inaccuracies that may be contained in this document,

makes no commitment to update or to keep current the information in this manual, or to notify any

person or organization of the updates. Please Note: For the most up-to-date version of this

manual, please see our web site at www.supermicro.com.

Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product

described in this manual at any time and without notice. This product, including software and docu-

mentation, is the property of Supermicro and/or its licensors, and is supplied only under a license.

Any use or reproduction of this product is not allowed, except as expressly permitted by the terms

of said license.

IN NO EVENT WILL SUPERMICRO BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL,

SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO

USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF

SUCH DAMAGES. IN PARTICULAR, SUPERMICRO SHALL NOT HAVE LIABILITY FOR ANY

HARDWARE, SOFTWARE, OR DATA STORED OR USED WITH THE PRODUCT, INCLUDING THE

COSTS OF REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH

HARDWARE, SOFTWARE, OR DATA.

Any disputes arising between manufacturer and customer shall be governed by the laws of Santa

Clara County in the State of California, USA. The State of California, County of Santa Clara shall

be the exclusive venue for the resolution of any such disputes. Super Micro's total liability for all

claims will not exceed the price paid for the hardware product.

FCC Statement: This equipment has been tested and found to comply with the limits for a class B

digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation. This equipment generates, uses,

and can radiate radio frequency energy and, if not installed and used in accordance with the instruc-

tions, may cause harmful interference to radio communications. However, there is no guarantee that

interference will not occur in a particular installation. If this equipment does cause harmful interfer-

ence to radio or television reception, which can be determined by turning the equipment off and on,

the user is encouraged to try to correct the interference by one or more of the following measures:

•Reorient or relocate the receiving antenna.

•Increase the separation between the equipment and receiver.

•Connect the equipment to an outlet on a circuit different from that to which the receiver

is connected.

•Consult the authorized dealer or an experienced radio/TV technician for help.

California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate warn-

ing applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate

Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”

WARNING: Handling of lead solder materials used in this

product may expose you to lead, a chemical known to the

State of California to cause birth defects and other repro-

ductive harm.

Manual Revision 1.0a

Release Date: December 31, 2013

Unless you request and receive written permission from Super Micro Computer, Inc., you may not

copy any part of this document.

Information in this document is subject to change without notice. Other products and companies

referred to herein are trademarks or registered trademarks of their respective companies or mark

holders.

Printed in the United States of America

iii

Preface

This ma n ual i s writte n for sy stem in t egrato rs, PC tec hnic ians a nd

knowledgeable PC users. It provides information for the installation and use of the

X10SLQ/X10SLQ-L motherboard.

About This Motherboard

The X10SLQ/X10SLQ-L supports the 4th generation Intel® Core™ i7/i5/i3,

Pentium, and Celeron processor in an LGA 1150 (H3) socket. With the Intel® Q87

Express chipset built in, the X10SLQ(-L) motherboard offers substantial enhance-

ment in system performance and storage capability for high-end, cost-effective

system platforms in a sleek package. Please refer to our website (http://www.su-

permicro.com/products/) for processor and memory support updates. This product

is intended to be installed and serviced by professional technicians.

Manual Organization

Chapter 1 describes the features, specications and performance of the mother-

board, and provides detailed information on the Intel Q87 Express chipset.

Chapter 2 provides hardware installation instructions. Read this chapter when in-

stalling the processor, memory modules and other hardware components into the

system. If you encounter any problems, see , which describes troubleChapter 3 -

shooting procedures for video, memory and system setup stored in the CMOS.

Chapter 4 includes an introduction to the BIOS, and provides detailed information

on running the CMOS Setup utility.

Appendix A provides BIOS Error Beep Codes.

Appendix B lists software program installation instructions.

Appendix C contains UEFI BIOS Recovery instructions.

Appendix D provides instructions on how to use the dual-block boot feature for

emergency BIOS recovery.

Product specificaties

Merk:	Supermicro
Categorie:	Moederborden
Model:	X10SLQ-L
Breedte:	244 mm
Diepte:	244 mm
Grafische adapter:	HD Graphics 4600
Ethernet LAN:	Ja
Type stroombron:	ATX
Aantal USB 2.0-poorten:	2
VGA (D-Sub)poort(en):	1
Aantal HDMI-poorten:	1
Aantal Ethernet LAN (RJ-45)-poorten:	2
DVI-D poorten:	1
Duurzaamheidscertificaten:	ENERGY STAR
Aantal DisplayPorts:	1
Aantal poorten USB 3.2 Gen 1 (3.1 Gen 1) Type A:	2
Processor socket:	LGA 1150 (Socket H3)
Processorfabrikant:	Intel
Maximum intern geheugen:	16 GB
Audio-uitgangskanalen:	7.1 kanalen
Ethernet interface type:	Fast Ethernet, Gigabit Ethernet
Chipset moederbord:	Intel® Q87
Trusted Platform Module (TPM):	Ja
Geheugen slots type:	DIMM
Grafische adapter-familie:	Intel
S/PDIF-uitgang:	Ja
PCI Express x16 (Gen 3.x) slots:	1
Ondersteunde opslagstationinterfaces:	SATA III
Geheugen voltage:	1.35, 1.5 V
LAN controller:	Intel I210-AT, Intel I217LM
Soorten RAID:	0, 1,5, 10
Aantal SATA III connectors:	5
Non-ECC:	Ja
Compatibele processors:	Intel Celeron, Intel Pentium
Ondersteunde geheugen types:	DDR3-SDRAM
Wifi:	Nee
Bedrijfstemperatuur (T-T):	0 - 60 °C
PCI Express x4 (Gen 2.x) slots:	1
PCI Express x1 (Gen 2.x) slots:	1
Trusted Platform Module (TPM) version:	1.2
Moederbord chipset familie:	Intel
Moederbord form factor:	micro ATX
Aantal geheugenslots:	2
Supported memory clock speeds:	1600 MHz
BIOS type:	AMI
Grootte BIOS-geheugen:	128 Mbit
ACPI version:	5.0
USB 2.0 aansluitingen:	4
Aantal COM-poorten:	4
PC gezondheids monitor:	FAN, LED, Temperature, Voltage
Niet gebufferd geheugen:	Ja
TPM connector:	Ja
Intel® Core i3/i5/i7/i9 series:	i3-4xxx, i5-4xxx, i7-4xxx
Ondersteunde geheugenmodule capaciteiten:	1GB, 2GB, 4GB, 8GB