Supermicro PDSBA-Q+ Handleiding

Supermicro Moederborden PDSBA-Q+

Lees hieronder de 📖 handleiding in het Nederlandse voor Supermicro PDSBA-Q+ (87 pagina's) in de categorie Moederborden. Deze handleiding was nuttig voor 8 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/87

PDSBA-Q+

PDSBA+

PDSBA

PDSBE

USER’S MANUAL

Revision 1.1c

Manual Revision: Rev. 1.1c

Release Date: August 13, 2009

Unless you request and receive written permission from Super Micro Computer, Inc., you may not

copy any part of this document.

Information in this document is subject to change without notice. Other products and companies

referred to herein are trademarks or registered trademarks of their respective companies or mark

holders.

Printed in the United States of America

The information in this User’s Manual has been carefully reviewed and is believed to be accurate.

The vendor assumes no responsibility for any inaccuracies that may be contained in this document,

makes no commitment to update or to keep current the information in this manual, or to notify any

person or organization of the updates. Please Note: For the most up-to-date version of this

manual, please see our website at www.supermicro.com.

Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product

described in this manual at any time and without notice. This product, including software, if any,

and documentation may not, in whole or in part, be copied, photocopied, reproduced, translated or

reduced to any medium or machine without prior written consent.

IN NO EVENT WILL SUPER MICRO COMPUTER, INC. BE LIABLE FOR DIRECT, INDIRECT,

SPECIAL, INCIDENTAL, SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE

USE OR INABILITY TO USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF

THE POSSIBILITY OF SUCH DAMAGES. IN PARTICULAR, SUPER MICRO COMPUTER, INC.

SHALL NOT HAVE LIABILITY FOR ANY HARDWARE, SOFTWARE, OR DATA STORED OR USED

WITH THE PRODUCT, INCLUDING THE COSTS OF REPAIRING, REPLACING, INTEGRATING,

INSTALLING OR RECOVERING SUCH HARDWARE, SOFTWARE, OR DATA.

Any disputes arising between manufacturer and customer shall be governed by the laws of Santa

Clara County in the State of California, USA. The State of California, County of Santa Clara shall

be the exclusive venue for the resolution of any such disputes. Super Micro's total liability for all

claims will not exceed the price paid for the hardware product.

FCC Statement: This equipment has been tested and found to comply with the limits for a Class B

digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation. This equipment generates,

uses, and can radiate radio frequency energy and, if not installed and used in accordance with the

manufacturer’s instruction manual, may cause interference with radio communications. However,

there is no guarantee that interference will not occur in a particular installation. If this equipment

does cause harmful interference to radio or television reception, which can be determined by turning

the equipment off and on, you are encouraged to try to correct the interference by one or more of

the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and the receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

Consult the dealer or an experienced radio/television technician for help.

California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate

warning applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate

Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”.

WARNING: Handling of lead solder materials used in this

product may expose you to lead, a chemical known to

the State of California to cause birth defects and other

reproductive harm.

Preface

About This Manual

Th is ma nual is wr itte n for system in te grat or s, PC te chni ci an s a nd

knowledgeable PC users. It provides information for the installation and use of

the motherboard. The PDSBA-Q+/PDSBA+/PDSBA/PDSBE supports a

single Intel Quad-core/Dual-core Core2 Duo/E6000/E4000/Xeon 3000/Pentium

® D/

Pentium® 4/Celeron Processor with a system bus speed of 1066/800/533 MHz. The

Intel Core2 Duo, Xeon, Pentium®

D, Pentium® 4 and Celeron Processors, housed

in a Flip-Chip Land Grid Array, support the 775-Land Grid Array Package that

interfaces with the motherboard via an LGA775 socket. The PDSBA-Q+/PDSBA+/

PDSBA/PDSBE supports up to 4MB of L2 Cache, Intel Trusted Platform Module

(TPM) (Note), EM64T, Enhanced Intel SpeedStep (EIST), Intel Virtualization Tech-

nology (VT), Streaming SIMD Extensions 2 (SSE2), Streaming SIMD Extensions 3

(SSE3), and Execute Disable (XD) Bit. Please refer to the motherboard specica-

tions pages on our website (http://www.supermicro.com/Product/motherboard) for

updates on processor support. This product is intended to be professionally installed

by a technician.

Manual Organization

Chapter 1 describes the features, specications and performance of the mainboard

and provides detailed information about the chipset.

Chapter 2 provides hardware installation instructions. Read this chapter when

installing the processor, memory modules and other hardware components into

the system. If you encounter any problems, see Chapter 3, which describes

troubleshooting procedures for the video, the memory and the system setup stored

in CMOS.

Chapter 4 includes an introduction to BIOS and provides detailed information on

running the CMOS Setup utility.

Appendix A lists BIOS POST Error Codes.

Appendix B and Appendix C list Windows OS and Software Installation Instruc-

tions.

Note: TPM support is available for the PDSBA-Q+/PDSBA+/PDSBA only.

Preface

iii

Product specificaties

Merk:	Supermicro
Categorie:	Moederborden
Model:	PDSBA-Q+
Breedte:	292 mm
Diepte:	240 mm
Aantal processorkernen:	2
Grafische adapter:	GMA 3000
Ethernet LAN:	Ja
Type stroombron:	ATX
Aantal USB 2.0-poorten:	6
VGA (D-Sub)poort(en):	1
Microfoon, line-in ingang:	Ja
Aantal Ethernet LAN (RJ-45)-poorten:	1
USB-versie:	2.0
Duurzaamheidscertificaten:	RoHS
Processorfabrikant:	Intel
Maximum intern geheugen:	8 GB
Ingebouwde grafische adapter:	Ja
Audio-uitgangskanalen:	7.1 kanalen
Ethernet interface type:	Fast Ethernet, Gigabit Ethernet
Chipset moederbord:	Intel Q965
Trusted Platform Module (TPM):	Ja
Geheugen slots type:	DIMM
Audiochip:	Realtek ALC883
PCI Express x1 slots:	1
PCI Express x16 slots:	1
Grafische adapter-familie:	Intel
Geheugen kanaal:	Dubbelkanaals
Maximum aantal HDD's per behuizing:	4
Ondersteunde opslagstationinterfaces:	SATA
PS/2 poort(en):	2
PCI Express x4 slots:	1
Component voor:	PC
Geheugen voltage:	1.8 V
LAN controller:	Intel® 82573L
Non-ECC:	Ja
Wake-on-LAN:	Ja
Compatibele processors:	Intel Celeron D, Intel Pentium 4, Intel Pentium D
Ondersteunde geheugen types:	DDR2-SDRAM
Max. aantal SMP-processoren:	1
Ondersteuning voor processor FSB:	533,800,1066 MHz
Moederbord chipset familie:	Intel
Moederbord form factor:	ATX
Aantal geheugenslots:	4
Supported memory clock speeds:	533,677,800 MHz
BIOS type:	Phoenix
Grootte BIOS-geheugen:	8 Mbit
ACPI version:	1.0
Ondersteuning voor parallel processing:	Niet ondersteund
Aantal SATA-aansluitingen:	4
USB 2.0 aansluitingen:	4
Aansluiting voor audiopaneel aan voorzijde:	Ja
Aansluiting voor diskettestation:	Ja
PC gezondheids monitor:	FAN, LED, Temperature, Voltage
Niet gebufferd geheugen:	Ja
Chassis intrusion aansluiting:	Ja
Ondersteunde geheugenmodule capaciteiten:	1GB, 2GB, 256MB, 512MB
Supported processor sockets:	LGA 775 (Socket T)
Serial port headers:	1
Parallele connector:	Ja
Seriële port via interne header:	Ja
Waakhondfunctie:	Ja