Supermicro SuperServer SYS-110D-4C-FRDN8TP Handleiding

Supermicro Niet gecategoriseerd SuperServer SYS-110D-4C-FRDN8TP

Lees hieronder de 📖 handleiding in het Nederlandse voor Supermicro SuperServer SYS-110D-4C-FRDN8TP (1 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 173 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/1
SuperServer 110D-4C/8C/14C/16C/20C-FRA(D)N8TP Quick Reference Guide
http://www.supermicro.com MNL-2541-QRG Rev. 1.0
Caution
System Fans
Installing the Air Shroud
For more information go to: http://www.supermicro.com/support
Always be sure all power supplies for this system have the same
power output. If mixed power supplies are installed, the system
will not operate.
IMPORTANT: See installation instructions and safety warning
before connecting system to power supply.
http://www.supermicro.com/about/policies/safety_information.cfm
SAFETY INFORMATION
To reduce risk of electric shock/damage to equipment, disconnect
power from server by disconnecting all power cords from electrical
outlets.
If any CPU socket empty, install protective plastic CPU cap.
WARNING:
WARNING:
The SYS-110D-4C/8C/14C/16C/20C-FRA(D)N8TP supports two types of PCI-E expansion card air shrouds, one for full-height cards and one for half-
height cards. (Optional)
1. Position the air shrouds in the chassis, as illustrated below. The air shroud fits just behind the fans.
2. Slide the air shroud into the grooves just behind the fan rack. If necessary, move any cables that interfere with the air shroud placement.
3. Remove perforated tabs, if necessary, for a good fit.
The fans can adjust their speed according to the heat level sensed in the system,
which results in more efficient and quieter fan operation. Fan speed is controlled by IPMI.
Each fan has its own separate tachometer.
If a fan fails, the remaining fans will ramp up to full speed, the overheat/fan fail LED on
the control panel will blink on and off, and an alarm will sound. Replace any failed fan at
your earliest convenience with the same type and model.
Power Supply
The power supplies are auto-switching capable. The 800W AC
power supplies can operate at a 100V to 240V input range.
The 600W DC power supplies can operate at -48V DC input
range. If replacing a power supply, the system does not need
to be powered down.
Warning: Do not tilt or
wiggle the riser bracket
when lifting it up.
AC PWS LED
DC PWS LED
Re ease evel L r
I tncorrec
I ctncorre
Correct
L reve
Accessing the System and installing the add-on Card
Replacing the Fans and Power Supply
Front View and Rear Features
Front View
Control Panel
System FeaturesBoard Layout
PWR
LED
HDD
LED
NIC1
FF
OH
ON
NIC2PWR RST X
JF1:
USB 4/5(3.0)
IPMI_LAN
SUPERDOM
LEDPWR
PCIe 4.0X8
JTPM1:TP M/PORT80
PCIe 4.0X8
CPU SLOT6 PCIe 4.0 X16
LAN 1/2LAN 3/4
LAN 5/6
LEDBMC
USB 2/3 USB 0/1
UID
DIMMC1
DIMMD1
LAN 7/8
CPU
DIMMA1
DIMMB1
VGA
JTPM1
JMD1
JBT1
I-SGPIO1
I-
I-S A1AT
JSLIM1
JSLIM2
JSTBY1
BT1
J10G_PWR
JRK1
JPH1
JTGLED2
S A0AT JSD1
JPT1
JSMB1
JLANLED1_1
JSFPLED1
JPI2C1
JD1
JGP1
JPCIe6
LEDT2 LEDT4
JPF1
JNS1
JPG1
JPTG1
J RM1
JWD1
JPME2
JPL1
JSDP1
COM1
JPV1
LED3
LEDT3 LEDT1
LED2
LED1
JMD1_SRW1
MH1
JMD1_SRW2
MH6
MH5
M 3
JL1
JOPPS
JBM2
JPWR1
JIPMB1
JNVI2C1
JF1
FAN2
FAN4
1NAF
FAN3
FANB FANA
JBM1
P1_NVME0
1
PRESS FIT
DESIGNED IN USA BAR CODE
X12SDV-4C-SPT8F
REV:1.00A
J BY1ST
FANB
I- 1SGPIO
FAN3
J M1TP
LED1 JF1 JSDP1
P1_NVME0
VGA LAN 7/8UIDMH6 LAN 5/6 LAN 3/4 LAN 1/2 BMC_LAN
JPME2
FANA
COM1
SLOT6
J 1PTG
JN 2CVI 1
JMD1_
SRW1
DI 1MMA
LEDBMC
J 1IPMB
JGP1
MH5
JMD1_
SRW2
DI 1MMB
JWD1
LED2
USB 0/1
USB 2/3
J M2SLI
J M1SLI
JMD1
JRK1
J 1PT
JSD1
I-S A1AT
FAN JD2 1 JL1
USB 4/5(3.0)LED3 JTGLED2
DIMMC1
DIMMD1
JOPPS
JLANLED1
_1
BT1
CPU
JPWR1
JPI2C1
JPL1
MH1
FAN4
MH3
I-SATA0
FAN1
JBT1
JPV1
JBM2
JSFPLED1
JBM1
JPH1
JNS1
JPG1
Connector Description
BT1 Onboard Battery
COM1 COM Header
CPU/System Fan Headers
BMC LAN Dedicated BMC LAN Port
FAN1 - FAN4, FANA, FANB
I-SATA0, I-SATA1
Serial Link General Purpose I/O HeaderI-SGPIO1
JD1 Speaker/Power LED Indicator (Pins 1-3: Power LED,
Pins 4-7: Speaker)
JF1 Front Control Panel Header
JGP1
Intel PCH SATA 3.0 Ports (I-SATA0 has built-in SATA
DOM Power on Pin 8)
General Purpose I/O Header
JIPMB1 System Mangement Bus Header (for BMC only)
JL1 Chassis Intrusion Header
JLANLED1_1 LAN3/4 Activity LED Header
JMD1 M.2 M-Key 2242/2280 (PCIe x4/SATA) Slot
JMD1_SRW1, JMD1_SRW2
M.2 Holding Screws
JNVI²C1
JOPPS Reserved for One Pulse Per Second
Non-Volatile Memory (NVMe) I²C Header
JPH1 4-pin HDD Power Connector
JPI²C1 Power I²C System Management Bus (Power SMB) Header
JPWR1
JPV1
JRK1
JSD1
JSDP1
JSFPLED1
JSLIM1, JSLIM2
JSTBY1
JTGLED2
JTPM1
LAN1/2, LAN3/4
LAN5/6
LAN7/8
P1_NVME0
SLOT6
UID
USB0/1, USB2/3
USB4/5
VGA
24-pin ATX Power Connector (Required)
8-pin CPU Power Connector (Required)
Intel RAID Key Header
Reserved for time synchronization
SATA DOM Power Connectors
LAN7/8 Activity LED Header
PCIe 4.0 p1-x8 SlimSAS Connector
Standby Power Header
LAN5/6 Activity LED Header
Trusted Platform Module/Port 80 Connector
1GbE RJ45 LAN Ports
10G BASE-T RJ45 LAN Ports
25GbE SFP28 LAN Ports
OCuLink Connector (to 4x SATA3.0 or PCIe 3.0 x4)
CPU1 PCIe 4.0 p1-x16 Slot
Front Accessible USB 2.0 Headers
Back Panel USB 3.0 Ports
VGA Port
Unit Identifier Switch
Control Panel Features
Item Features Description
1 Informational LED Indicates one of multiple conditions
Indicates network activity on LAN port 2
when flashing.
2 NIC2 LED
3 NIC1 LED
4 HDD LED
5 Power LED
6 UID Button
Indicates power is being supplied to the
system power supply.
7 Power
The main power button is used to apply
or remove power from the power supply
to the server.
Indicates network activity on LAN port 1
when flashing.
Indicates hard drive activity when flashing.
The UID is used to switch/turn on/turn off
UID LED next to the PCI-E slots.
6 7
1 2 3 4 5
12
Each system comes with a unique
default password for the ADMIN
user.
This can be found on a sticker
on the motherboard and a sticker
underneath the service tag on
chassis.
If necessary, the password can
be reset by the Supermicro
IPMICFG tool.
BMC Password Label
Pull-out tag with BMC unique
password underneath.
For more information, please visit
https://www.supermicro.com/en/solutions/management-software/bmc-resources
VGA PortI/O Ports PCI-EControl
Panel Service/Asset
Tag (BMC label)
Redundant power supplyRedundant and hot-swappable fans
PULL
System Overview
Motherboard X12SDV-4C/8C/14C/16C/20C-SPT8F
Chassis
Processor
Support
CSE-515M-R000NP2
Intel® Xeon D Ice Lake 4/8/14/16/20 Cores Processor from 65W to 120W
Memory
Drive Support
Four DIMM slots, up to 256GB ECC RDIMM or 512GB LRDIMM DDR4
memory withspeeds of up to 2933MT/s
Note: 128GB RDIMM is not compatible with the system.
Expansion Slots
Two internal 2.5" SATA3 drive bays
I/O Ports
One PCIe 4.0 p1-x16 slots (FHFL slots)
One M.2 PCIe 3.0 x4/SATA3 slot (supports M-Key 2280 and 2242)
System Cooling Five counter-rotating, hot-swappable fans
Power
Four GbE LAN ports, two 10G BASE-T LAN ports, two 25G SFP28 ports
One dedicated RJ45 BMC LAN port
One VGA port
Two USB 3.0 Type A
Form Factor 1U; (WxHxD) 17.2 x 1.7 x 15.7 in (437 x 43 x 398.78 mm)
SYS-110D-4C/8C/14C/16C/20C-FRAN8TP: Two 800W AC redundant power supplies
SYS-110D-4C/8C/14C/16C/20C-FRDN8TP: Two 600W DC redundant power supplies
Note: The Quick Reference Guide can be found on the product page for SYS-110D-4C/8C/14C/
16C/20C-FR(A/D)N8TP.
The following safety agency or regulatory models associated with the SYS-110D-4C/8C/14C/16C
/20C-FRA(D)N8TP have been certified as compliant with UL or CSA: 515M-R8X12, 515M-8, 515
M-R6DX12, and 515M-6D.
This chapter provides a brief outline of the functions and features of the SuperServer
SYS-110D-4C/8C/14C/16C/20C-FR(A/D)N8TP.
It is based on the X12SDV-4C/8C/14C/16C/20C-SPT8F motherboard and the
CSE-515M-R000NP2 chassis.
The following provides an overview of the specifications and capabilities.

Product specificaties

Merk: Supermicro
Categorie: Niet gecategoriseerd
Model: SuperServer SYS-110D-4C-FRDN8TP

Heb je hulp nodig?

Als je hulp nodig hebt met Supermicro SuperServer SYS-110D-4C-FRDN8TP stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Niet gecategoriseerd Supermicro

Supermicro

Supermicro SC813T-500C Handleiding

17 November 2024
Supermicro

Supermicro SC813T-500 Handleiding

17 November 2024
Supermicro

Supermicro SC512L Handleiding

17 November 2024
Supermicro

Supermicro H14DSH Handleiding

5 November 2024
Supermicro

Supermicro SuperStorage 6049P-E1CR60H Handleiding

7 Augustus 2024
Supermicro

Supermicro AOM-TPM-9670V-S-O Handleiding

26 Juli 2024
Supermicro

Supermicro AOM-TPM-9670H-S-O Handleiding

26 Juli 2024
Supermicro

Supermicro AOM-TPM-9670H-S Handleiding

26 Juli 2024
Supermicro

Supermicro SuperServer SSG-640P-E1CR24H Handleiding

3 Juli 2024
Supermicro

Supermicro SuperStorage 6049P-E1CR45L Handleiding

10 Juni 2024

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Livarno Lux

Livarno Lux IAN 74336 Handleiding

17 November 2024
Livarno Lux

Livarno Lux IAN 277515 Handleiding

17 November 2024
Livarno Lux

Livarno Lux IAN 114812 Handleiding

17 November 2024
Livarno Lux

Livarno Lux IAN 292286 Handleiding

17 November 2024
Livarno Lux

Livarno Lux IAN 291521 Handleiding

17 November 2024
Livarno Lux

Livarno Lux IAN 275705 Handleiding

17 November 2024
Livarno Lux

Livarno Lux IAN 276468 Handleiding

17 November 2024
Livarno Lux

Livarno Lux IAN 90241 Handleiding

17 November 2024
Livarno Lux

Livarno Lux IAN 277535 Handleiding

17 November 2024
Livarno Lux

Livarno Lux IAN 277533 Handleiding

17 November 2024