Supermicro MBM-CMM-001 Handleiding

Supermicro Niet gecategoriseerd MBM-CMM-001

Lees hieronder de 📖 handleiding in het Nederlandse voor Supermicro MBM-CMM-001 (78 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 22 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/78

MicroBlade™

Web-based Management Utility

USER’S MANUAL

Revison 1.0d

MicroBlade Web-based Management Utility USER’S MANUAL

The information in this USER’S MANUAL has been carefully reviewed and is believed to be accurate. The

vendor assumes no responsibility for any inaccuracies that may be contained in this document, makes no

commitment to update or to keep current the information in this manual, or to notify any person or

organization of the updates. Please Note: For the most up-to-date version of this manual, please see

our web site at www.supermicro.com.

Super Micro Computer, Inc. (“Supermicro”) reserves the right to make changes to the product described

in this manual at any time and without notice. This product, including software, if any, and documentation

may not, in whole or in part, be copied, photocopied, reproduced, translated or reduced to any medium or

machine without prior written consent.

IN NO EVENT WILL SUPERMICRO BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL,

SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO USE

THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH

DAMAGES. IN PARTICULAR, SUPERMICRO SHALL NOT HAVE LIABILITY FOR ANY HARDWARE,

SOFTWARE, OR DATA STORED OR USED WITH THE PRODUCT, INCLUDING THE COSTS OF

REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH HARDWARE,

SOFTWARE, OR DATA.

Any disputes arising between manufacturer and customer shall be governed by the laws of Santa Clara

County in the State of California, USA. The State of California, County of Santa Clara shall be the

exclusive venue for the resolution of any such disputes. Supermicro's total liability for all claims will not

exceed the price paid for the hardware product.

FCC Statement: This equipment has been tested and found to comply with the limits for a Class A digital

device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference when the equipment is operated in a commercial environment. This

equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in

accordance with the manufacturer’s instruction manual, may cause harmful interference with radio

communications. Operation of this equipment in a residential area is likely to cause harmful interference,

in which case you will be required to correct the interference at your own expense.

California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate warning

applies only to products containing CR (Manganese Dioxide) Lithium coin cells. Perchlorate

Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate for further

details.

HANDLING OF LEAD SOLDER MATERIALS USED IN THIS PRODUCT MAY EXPOSE

YOU TO LEAD, A CHEMICAL KNOWN TO THE STATE OF CALIFORNIA TO CAUSE

BIRTH DEFECTS AND OTHER REPRODUCTIVE HARM.

Manual Revison 1.0d

Release Date: November 23, 2016

Unless you request and receive written permission from Super Micro Computer, Inc., you may not copy

any part of this document.

Information in this document is subject to change without notice. Other products and companies referred

to herein are trademarks or registered trademarks of their respective companies or mark holders.

Printed in the United States of America

iii

Preface

About this Manual

This manual is written for professional system integrators, Information Technology

professionals, service personnel and technicians. It provides information for the use of

Supermicro's MicroBlade Web-based Management Utility.

Manual Organization

Chapter 1: Introduction

The first chapter provides an introduction about the Web-based Management Utility.

Chapter 2: Blade System

This chapter covers the menu options and controls for the Blade System menu.

Chapter 3: System Health

This chapter covers the menu options and controls for the System Health menu.

Chapter 4: Configuration

This chapter covers the menu options and controls for the Configuration menu.

Chapter 5: Remote Console

This chapter covers the use of the Remote Console menu.

Chapter 6: Maintenance

This chapter covers the use of the Maintenance menu.

Product specificaties

Merk:	Supermicro
Categorie:	Niet gecategoriseerd
Model:	MBM-CMM-001
Ethernet LAN:	Ja
Aantal Ethernet LAN (RJ-45)-poorten:	2
Ethernet LAN, data-overdrachtsnelheden:	- Mbit/s
Beheerprotocollen:	RMCP, RMCP+