Sunding SD-515 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Sunding SD-515 (2 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 35 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2
+
CR2032
+CR
2032
MapMyRIDE MapMyFitness Wahoo Fitness Endomondo Runtastic Road bike
JoycuneLite
单车蓝牙踏频器(包含踏频传感器及速度
传感器)安装在车架后叉上,精准的测算
骑行过程中的速度与踏频。
产品特点:蓝牙 赫兹无线传输4 0.2 4.
电池寿命达(预计): 小时500
电池类型: 纽扣电池*CR2032 1
无线传输距离:< 米( . 3 9 9 f t
防水级别:防泼溅级别
:- ~ ℃ 10 50 14F 122F
克/ . 盎4 0 1 4
1、将扎带穿过踏频器底部小孔。
2、曲柄磁铁的安装。
将磁铁装在左侧曲柄脚踏背面固定牢固。用扎带将
蓝牙踏频传感器固定在后下叉位置。先不要将扎带
锁紧,将速度传感器磁铁装在对应的后轮靠近传感
器侧的一根辐条上,并固定牢固。
同智能手机/蓝牙码表匹配:
1 1.摇动曲柄或轮圈 mm 3mm~ 使磁铁划过传感器
2.传感器唤醒后将发送匹配信息至之智能手机
或蓝牙码表。在安装电池并启动传感器后,匹
配请求将持续发送 分钟至智能手机或蓝牙码表1
进行匹配请求。若两分钟没有进行匹配操作,
传感器将自动进入休眠状态。
1.请确保蓝牙传感器不要受到猛烈撞击。
2.请确保蓝牙传感器远离高温物质,高温可导致
传感器内电池爆炸。
3.请用软布和普通清洁剂对传感器进行擦拭清洁
请勿自行打开或对传感器内部元件进行维修,如
进行任何未经授权操作,或者不再提供产品的官
方三包服务。
3、调整好轮圈磁铁和传感器的间隔位置。确
保间隔不超过 毫米,当位置调整合适后,请3
将扎带锁紧。
4、换电池
牙 . 单线4 0
. 单线4 0
踏频器安装步
器 电
铁 曲
应用软件在应用商店
BLUETOOTH4.0 2.4GHz Wireless Bike Combo Sensor
User s Guide`
Bike combo sensor (includes the cadence
sensor and a speed sensor)attaches to the
chain stay of your bike to help you track
your speed and cadence accurately
SPECIFICATION
BIKE COMBO SENSOR INSTALLATION PROCEDURE
Tech:BLE2.4GHz Wireless
Battery Lifetime(approx):500hours
Battery:CR2032 1pc(included)×
Transmisson range:< 3 meter(9.9ft)
Waterproof:Splash proof
Operating temperature:-10 50 14 122 ℃( )
Weight:40g/1.41oz(Bike combo sensor)
Use the supplied cable ties to hold the sensor
in place, Do not fully tighten, Attach the magnet
to a spoke, Do not fully tighten.
Adjust the magnets and the sensors, making sure
the air gap between sensor markings and magnets
is less than 3mm,when setup is complete, tighten
the cable tiles
PAIRING WITH BIKE COMPUTER
WARNING
CHANGING BATTERY
Swipe the wheel magnet crank magnet about 1mm~3mm from the speed
sensor inorder to wake up the combo sensor.
Combo sensor will transmit a pairing bit when it tigger by wheel magnet
or crankmagnet. The pairing bit will present after a battery installation
and it will last for 1minute. Combo sensor will stop transmit RF signal
and go back to sleep modewhen there is no tigger in 2 minutes.
Do not drop a bike sensor or object it to severe shock.
Do not expose a bike Combo Sensor to extreme to temperatures and
excessive moistureUse diluted neutral on a solt cloth to clcan a bike
combo Sensor.
Do not attempt to disassemble,repair,or make any modifications to a Bike
ComboSensor. Any attempt to do so will make the warranty invalid.
+
CR2032
1.Combo sensor
2.Battery Cover
3.Wheel Magnet
4.Crank Magnet
5.Sponge
6.Nylon Ties
APPS IN APP STORE
Bluetooth
1 2 3
MapMyRIDE MapMyFitness Wahoo Fitness Endomondo Runtastic Road bike
JoycuneLite


Product specificaties

Merk: Sunding
Categorie: Niet gecategoriseerd
Model: SD-515

Heb je hulp nodig?

Als je hulp nodig hebt met Sunding SD-515 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Sunding

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd