Sunbeam Verve SR6585 Handleiding

Sunbeam Strijkijzer Verve SR6585

Lees hieronder de 📖 handleiding in het Nederlandse voor Sunbeam Verve SR6585 (12 pagina's) in de categorie Strijkijzer. Deze handleiding was nuttig voor 39 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/12

Verve® Irons

Instruction Booklet

This book covers the use and care of the following Verve™ Irons:

SR6850 Verve® 68 Resilium® Shot & Spray Iron with Safety Auto-Off

SR6650 Verve® 66 Stainless Shot & Spray Iron with Safety Auto-Off

SR6550 Verve® 65 Platinum Shot & Spray Iron with Safety Auto-Off

SR6250 Verve® 62 Platinum Shot & Spray Iron

Please read these instructions carefully

and retain for future reference.

Sunbeam’s Safety Precautions 3

Features of your Verve Iron 4

Using your Verve Iron 6

The Safety Auto-Off Feature 7

Care and Cleaning of your Verve Iron 8

Ironing Tips & Tricks 9

Ironing Chart 10

Contents

Important instructions – retain

for future use.

Sunbeam’s Safety Precautions

Sunbeam is very safety conscious when

designing and manufacturing consumer

products, but it is essential that the product

user also exercise care when using an

electrical appliance. Listed below are

precautions which are essential for the safe use

of an electrical appliance:

• Read carefully and save all the instructions

provided with an appliance.

• Always turn the power off at the power outlet

before you insert or remove a plug.

Remove by grasping the plug - do not pull on

the cord.

• Turn the power off and remove the plug

when the appliance is not in use and

before cleaning.

• Do not use your appliance with an extension

cord unless this cord has been checked

and tested by a qualified technician or

service person.

• Always use your appliance from a power

outlet of the voltage (A.C. only) marked

on the appliance.

• This appliance is not intended for use by

persons (including children) with reduced

physical, sensory or mental capabilities,

or lack of experience and knowledge,

unless they have been given supervision or

instruction concerning use of the appliance

by a person responsible for their safety.

• Children should be supervised to ensure that

they do not play with the appliance.

• The temperature of accessible surfaces may

be high when the appliance is operating.

• Never leave an appliance unattended while

in use.

• Do not use an appliance for any purpose

other than its intended use.

• Do not place an appliance on or near a hot

gas flame, electric element or on a heated

oven.

• Do not place on top of any other appliance.

• Do not let the power cord of an appliance

hang over the edge of a table or bench top

or touch any hot surface.

• Do not operate any electrical appliance with

a damaged cord or after the appliance has

been damaged in any manner. If damage

is suspected, return the appliance to the

nearest Sunbeam Appointed Service Centre

for examination, repair or adjustment.

• For additional protection, Sunbeam

recommend the use of a residual current

device (RCD) with a tripping current not

exceeding 30mA in the electrical circuit

supplying power to your appliances.

• Do not immerse the appliance in water

or any other liquid unless recommended.

• Appliances are not intended to be operated

by means of an external timer or separate

remote control system.

• This appliance is intended to be used in

household and similar applications such

as: staff kitchen areas in shops, offices and

other working environments; farm houses; by

clients in hotels, motels and other residential

type environments; bed and breakfast type

environments.

SAFETY PRECAUTIONS FOR YOUR IRON

• Do not leave a hot iron within reach of

children. If they come into contact with a

hot iron it could lead to serious burns.

• Iron only on an ironing board.

• An iron takes approximately 30 minutes to

cool down. Allow the iron to cool completely

before storing.

• Do not wind the cord around the soleplate

while the iron is still hot.

• Do not leave the iron unattended while it is

plugged into the power outlet.

• Always unplug the iron from the power

outlet before filling or emptying the water

tank.

• The iron must be used and rested on a

stable surface.

• The iron is not to be used if it has been

dropped, if there are visible signs of

damage or if it is leaking.

If you have any concerns regarding the performance and use of your appliance,

please visit www.sunbeam.com.au or contact the Sunbeam Consumer Service Line.

Ensure the above safety precautions are understood.

Product specificaties

Merk:	Sunbeam
Categorie:	Strijkijzer
Model:	Verve SR6585

Heb je hulp nodig?

Als je hulp nodig hebt met Sunbeam Verve SR6585 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Strijkijzer Sunbeam

Sunbeam SB8300 Handleiding

13 November 2024

Sunbeam Pro Glide Plus 8700 SR8700 Handleiding

25 Juli 2024

Sunbeam Verve 680 SRA6800 Handleiding

30 Augustus 2023

Sunbeam PressXPress STC5000 Handleiding

30 Augustus 2023

Sunbeam Verve 650 CeraFlow SRC6500 Handleiding

30 Augustus 2023

Sunbeam Verve 655 SRS6550 Handleiding

30 Augustus 2023

Sunbeam Simple Press 3050 Handleiding

14 Juni 2023

Sunbeam Verve SR6585 Handleiding

1 Juni 2023

Sunbeam Steam Master LX 4059 Handleiding

30 Mei 2023

Sunbeam Pro Steam Travel SR2300 Handleiding

25 Mei 2023

Handleiding Strijkijzer

Nieuwste handleidingen voor Strijkijzer

Russell Hobbs Smooth IQ Pro RHC650 Handleiding

20 November 2024

Russell Hobbs Smooth IQ Plus RHC700 Handleiding

20 November 2024

Russell Hobbs Steam Genie 27220-56 Handleiding

20 November 2024

Tefal Prima 55 FV3755 Handleiding

19 November 2024

Oster GCSTAC6952 Handleiding

18 November 2024

Easy Home GT-SF-DBL-01 Handleiding

17 November 2024

Easy Home GT-SI-lcd-03 Handleiding

17 November 2024

Calor FV4970C0 Handleiding

16 November 2024

Calor Ultimate Pure FV9845 Handleiding

16 November 2024

Taurus Fiji 3000 Ceramic Handleiding

16 November 2024