Sunbeam Steam Master LX 4059 Handleiding

Sunbeam Strijkijzer Steam Master LX 4059

Lees hieronder de πŸ“– handleiding in het Nederlandse voor Sunbeam Steam Master LX 4059 (48 pagina's) in de categorie Strijkijzer. Deze handleiding was nuttig voor 40 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/48
Instructio n Manual
STEAM MASTER LX IRON
Ma n u el
MASTER LX
Man u a l de
STEAM MASTER LX
Ma n u al
STEAM MASTER LX
When using your flatiron, basic safety precautions should always be followed,
including the following:
READ ALL INSTRUCTIONS BEFORE USING
1. Use iron only for its intended use.
2. To protect against risk of electric shock, do not immerse the iron in water
or other liquids.
3. The iron should always be turned to β€œOFF” before plugging or unplugging
from outlet. Never yank cord to disconnect from outlet; instead, grasp plug
and pull to disconnect.
4. Do not allow cord to touch hot surfaces. Let iron cool completely before
putting away. Retract cord into cord reel when storing.
5. Always disconnect iron from electrical outlet when filling with water or
emptying and when not in use.
6. Do not operate iron with a damaged cord’or if the iron has been dropped
or damaged. To avoid the risk of electric shock, do not disassemble the iron.
Take it to a qualified serviceman for examination and repair.
Incorrect reassembly can cause a risk of electric shock when the iron is used.
7. Close supervision is necessary for any appliance being used by or
near children. Do not leave iron unattended while connected or on
an ironing board.
8. Burns can occur from touching hot metal parts, hot water or steam.
Use caution when you turn a steam iron upside down -there may be
hot water in the reservoir.
9. If the flatiron is not operating normally, disconnect from the power supply
and have the flatiron serviced by qualified service personnel.
Your Sunbeam” Iron is designed to rest on the heel rest. Do not leave the iron.
unattended. Do not set the iron on an unprotected surface, even if it is on its
heel rest.
SPECIAL INSTRUCTIONS
This is a 1200 Watt appliance.* To avoid a circuit overload, do not operate
another high wattage appliance on the same circuit.
2. If an extension cord is absolutely necessary, a lo-ampere cord should be used.
Cords rated for less amperage may overheat. Care should be taken to arrange
the cord so that it cannot be pulled or tripped over.
FOR PRODUCTS PURCHASED IN THE U.S. AND CANADA ONLY
To reduce the risk of electrical shock, this appliance has a polarized plug
(one
blade is wider than the other). This plug fits a polarized outlet only one way;
if the plug does not fit fully into the outlet, reverse the plug. If it still does not fit,
contact a qualified electrician. Do not attempt to defeat this safety feature.
*In Mexico, the iron runs at 127 Volts, 1350 Watts. If an extension cord-is
necessary, a 13 ampere cord should be used.


Product specificaties

Merk: Sunbeam
Categorie: Strijkijzer
Model: Steam Master LX 4059

Heb je hulp nodig?

Als je hulp nodig hebt met Sunbeam Steam Master LX 4059 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Strijkijzer Sunbeam

Handleiding Strijkijzer

Nieuwste handleidingen voor Strijkijzer