Sunbeam Pro Steam SR4400 Handleiding

Sunbeam Strijkijzer Pro Steam SR4400

Lees hieronder de 📖 handleiding in het Nederlandse voor Sunbeam Pro Steam SR4400 (13 pagina's) in de categorie Strijkijzer. Deze handleiding was nuttig voor 57 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/13
PRO STEAM
IRON
User Guide
SR4400
SR4400 Pro Steam® Power Iron
Contents
Sunbeam’s Safety Precautions 3
Features of your Pro Steam Iron 4
Using your Pro Steam Iron 6
Care and Cleaning 8
Ironing Tips and Tricks 9
Ironing Chart 10
3
Sunbeam is very safety conscious when designing
and manufacturing consumer products, but it is
essential that the product user also exercise care
when using an electrical appliance. Listed below
are precautions which are essential for the safe use
of an electrical appliance:
• Read carefully and save all the instructions
provided with an appliance.
• Always turn the power off at the power outlet
before you insert or remove a plug. Remove
by grasping the plug - do not pull on the cord.
• Turn the power off and remove the plug when
the appliance is not in use and before cleaning.
• Do not use your appliance with an extension
cord unless this cord has been checked and
tested by a qualified technician or service
person.
• Always use your appliance from a power outlet of
the voltage (A.C. only) marked on the appliance.
• This appliance is not intended for use by
persons (including children) with reduced
physical, sensory or mental capabilities, or lack
of experience and knowledge, unless they have
been given supervision or instruction concerning
use of the appliance by a person responsible for
their safety.
• Children should be supervised to ensure that
they do no play with the appliance.
• The temperature of accessible surfaces may be
high when the appliance is operating.
• Never leave an appliance unattended while in
use.
• Do not use an appliance for any purpose other
than its intended use.
• Do not place an appliance on or near a hot gas
flame, electric element or on a heated oven.
• Do not place on top of any other appliance.
• Do not let the power cord of an appliance hang
over the edge of a table or bench top or touch
any hot surface.
• Do not operate any electrical appliance with
a damaged cord or after the appliance has
been damaged in any manner. If damage is
suspected, return the appliance to the nearest
Sunbeam Appointed Service Centre
for examination, repair or adjustment.
• For additional protection, Sunbeam recommend
the use of a residual current device (RCD) with
a tripping current not exceeding 30mA in
the electrical circuit supplying power to your
appliances.
• Do not immerse the appliance in water or any
other liquid unless recommended.
• Appliances are not intended to be operated by
means of an external timer or separate remote
control system.
• This appliance is intended to be used in
household and similar applications such as: staff
kitchen areas in shops, offices and other working
environments; farm houses; by clients in hotels,
motels and other residential type environments;
bed and breakfast type environments.
If you have any concerns regarding the performance and use of your appliance,
please visit www.sunbeam.com.au or contact the Sunbeam Consumer Service Line.
Ensure the above safety precautions are understood.
Sunbeam’s Safety Precautions
SAFETY PRECAUTIONS FOR YOUR IRON
• Do not leave a hot iron within reach of children.
If they come into contact with a hot iron it
could lead to serious burns.
• Iron only on an ironing board.
• An iron takes approximately 30 minutes to cool
down. Allow the iron to cool completely before
storing.
• Do not wind the cord around the soleplate while
the iron is still hot.
• Do not leave the iron unattended while it is
plugged into the power outlet.
• Always unplug the iron from the power outlet
before filling or emptying the water tank.
• The iron must be used and rested on a stable
surface.
• When placing the iron on its heel, ensure that
the surface on which the stand is placed is
stable.
• The iron is not to be used if it has been
dropped, if there are any visible signs of
damage or if it is leaking.

Product specificaties

Merk: Sunbeam
Categorie: Strijkijzer
Model: Pro Steam SR4400

Heb je hulp nodig?

Als je hulp nodig hebt met Sunbeam Pro Steam SR4400 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Strijkijzer Sunbeam

Sunbeam

Sunbeam Verve 620 SRA6200 Handleiding

13 December 2024
Sunbeam

Sunbeam SB8300 Handleiding

13 November 2024
Sunbeam

Sunbeam Pro Glide Plus 8700 SR8700 Handleiding

25 Juli 2024
Sunbeam

Sunbeam Verve 680 SRA6800 Handleiding

30 Augustus 2023
Sunbeam

Sunbeam PressXPress STC5000 Handleiding

30 Augustus 2023
Sunbeam

Sunbeam Verve 650 CeraFlow SRC6500 Handleiding

30 Augustus 2023
Sunbeam

Sunbeam Verve 655 SRS6550 Handleiding

30 Augustus 2023
Sunbeam

Sunbeam Simple Press 3050 Handleiding

14 Juni 2023
Sunbeam

Sunbeam Verve SR6585 Handleiding

1 Juni 2023
Sunbeam

Sunbeam Steam Master LX 4059 Handleiding

30 Mei 2023

Handleiding Strijkijzer

Nieuwste handleidingen voor Strijkijzer

Girmi

Girmi ST51 Handleiding

17 December 2024
Girmi

Girmi ST05 Handleiding

17 December 2024
Girmi

Girmi SS04 Handleiding

17 December 2024
Girmi

Girmi ST63 Handleiding

17 December 2024
Girmi

Girmi ST04 Handleiding

17 December 2024
Bosch

Bosch Sensixx AdvancedSteam TDS3761GB Handleiding

16 December 2024
Adler

Adler AD 5042 Handleiding

9 December 2024
Izzy

Izzy Steam Station Active Force IZ-1112 Handleiding

9 December 2024
Scarlett

Scarlett SC-SI30K30 Handleiding

8 December 2024
Scarlett

Scarlett SC-SI30K26 Handleiding

8 December 2024