Sun Joe SWJ698E-RM Handleiding

Sun Joe Zaagmachine SWJ698E-RM

Lees hieronder de 📖 handleiding in het Nederlandse voor Sun Joe SWJ698E-RM (24 pagina's) in de categorie Zaagmachine. Deze handleiding was nuttig voor 44 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/24

A Division of Snow Joe

®, LLC Model SWJ698E-RM Form No. SJ-SWJ698E-RM-880E-M-V1

OPERATOR’S MANUAL

®, LLC

ELECTRIC CHAIN SAW

12-INCH | 9-AMP

A Division of Snow Joe

®, LLC Model SWJ698E-RM Form No. SJ-SWJ698E-RM-880E-M-V1

OPERATOR’S MANUAL

®, LLC

ELECTRIC CHAIN SAW

12-INCH | 9-AMP

IMPORTANT!

Safety Instructions

All Operators Must Read These

Instructions Before Use

Read all the instructions contained in this manual. Keep this

manual in a safe place, so that the information is available at

all times. If you give the equipment to another person,

make sure to provide these operating instructions. Basic safety

precautions should always be followed to reduce the risk of

re, electric shock, and personal injury.

Notice the personal safety alert symbol used in this m

manual to draw your attention to a given along WARNING

with the particular operating instruction. This means that the

operation requires special ATTENTION, CAUTION,

and AWARENESS.

Intended use

This electric chain saw was designed and manufactured for

trimming and pruning tree limbs and branches and for cutting

smaller logs up to 9 in. (23 cm) thick. All of the wooden objects

intended to be cut with this chain saw should be no thicker

than the guide bar's maximum cutting capabilities.

Improper use

Any other use diering from the above mentioned applications

poses a serious hazard to the user and may damage both the

tool and your personal property. Examples of improper use

include, but are not limited to:

• trimming hedges;

• carving;

• sectioning pallets, crates, and various packing materials;

• sectioning furniture or other materials with nails, screws,

or other metal components;

• butchering meat;

• using the machine to lift, move, or split objects;

• using the machine while fastened to xed supports.

Improper use of the machine will invalidate the warranty,

relieve the manufacturer from all liabilities. The user will

consequently be liable for all and any damage or injury to

himself/herself or others.

General Safety

mWARNING! When using electric yard tools, basic safety

precautions should always be followed to reduce the risk of

re, electric shock, and personal injury, including the following:

1. Keep guards in place – Protective guards should be

checked periodically to ensure they are properly tted and

in correct working order.

2. Remove adjusting keys and wrenches – Check that

adjusting wrenches are removed from the saw before

turning it on.

3. Keep work area clean and well-lit – Clear work area of

branches and limbs after each cutting session.

Cluttered areas invite accidents.

4. Avoid dangerous conditions – Do not use this machine

in rainy, stormy, damp, or wet locations. Do not operate

the unit in gaseous or explosive atmospheres.

Motors in these units normally spark, and the sparks may

ignite fumes.

5. Do not use the chain saw in the rain.

6. Keep bystanders and children away – All bystanders,

including children and pets, should be kept a safe

distance away from the work area.

7. Do not force the tool – It will do the job eectively and

safely if it is used at the rate for which it was designed.

8. Use the right tool – Do not force the tool or any

attachment on the tool to do a job for which it was not

intended.

9. Wear proper apparel – Do not wear loose articles of

clothing or jewelry since such items may get caught

in moving parts. Wearing heavy-duty rubber gloves,

substantial non-skid footwear, and close-tting clothing is

recommended when working outdoors with power tools.

10. Wear protective hair coverings to contain long hair.

11. Always wear safety glasses and ear defenders to

provide eye and ear protection – Everyday eyeglasses

only have impact resistant lenses and do not provide the

same protection as safety glasses.

12. Wear face or dust masks – If the cutting operation is

dusty, the use of a face or dust mask specially designed

to lter out microscopic particles is recommended.

13. Do not overreach – Keep proper footing and balance

at all times.

14. Maintain tools with care – Keep tools sharp and clean

for the best and safest performance. Follow instructions

for lubricating and changing accessories.

15. Disconnect tool – Disconnect the chain saw from the

power supply when not in use, before servicing,

when transporting, or when changing the chain or other

accessories.

16. Reduce the risk of unintentional starting – Make sure

the switch is in the OFF position before plugging the tool

into a power source.

17. Use recommended accessories – Consult the owner’s

manual for recommended accessories. The use of

improper accessories may cause risk of injury.

18. Check for damaged parts – Before each use, repair or

replace any guard or part that is damaged. In addition,

check for alignment of moving parts, binding of moving

parts, breakage of parts, and any other conditions that

may aect the tool's operation.

19. Never leave tool unattended while it is running –

Turn the power OFF by removing the power cord directly

from its socket. Do not leave the saw until the cutting bar

comes to a complete stop.

20. Avoid unintentional starting – Do not carry the chain saw

with your nger on the switch.

21. Do not grasp the exposed cutting blade or cutting

edges when picking up or holding the saw – Be sure to

encase the cutting bar in its protective sheath when not

in use.

22. Stay alert – Watch what you are doing. Use common

sense. Do not operate the chain saw when you are tired.

23. Store idle tool indoors – When not in use, appliances

should be stored indoors in a dry and high or locked-up

place out of the reach of children.

Chain Saw Use + Care

Save all warnings and instructions for future reference.

The term “power tool” in the warnings refers to your electric

chain saw.

mWARNING! Turn o the power switch and disconnect

the power source before adjusting, inspecting, servicing or

cleaning the power tool, when changing accessories,

or when any other dangerous conditions present themselves.

All maintenance tasks should be performed after the power

tool's rotating parts have stopped completely. Such preventive

safety measures reduce the risk of starting the power tool

accidentally.

1. Do not force the power tool. Use the correct power tool

for your application. The correct power tool will perform

better with less likelihood of personal or mechanical

damage if it is used at the rate for which it was designed.

2. Do not use the power tool if the switch does not turn it on

and o. Any power tool that cannot be controlled with the

switch is dangerous and must be repaired.

3. Disconnect the unit from its power source before making

any adjustments, changing accessories, or storing the

power tool. Such preventive safety measures reduce the

risk of starting the power tool accidentally.

4. Store idle power tools indoors in a dry, locked place

out of the reach of children. Do not allow anyone who is

unfamiliar with the power tool or these instructions access

to the machine. Power tools are dangerous in the hands of

untrained users.

5. Maintain power tools with care to ensure safe operation

and optimal performance. Keep handles dry, clean,

and free from oil and grease. Check for misalignment or

obstruction of moving parts, breakage of parts, and any

other condition that may aect the power tool’s operation.

If damage is found, have the power tool repaired before

use. Many accidents are caused by poorly maintained

power tools.

6. Keep cutting tools sharp and clean. Properly maintained

cutting tools with sharp cutting edges are less likely to jam

and are easier to control.

7. Use the power tool and accessories in accordance with

these instructions, and be sure to take into account the

working conditions and the work to be performed.

Using the power tool for operations other than those

intended could result in a hazardous situation.

8. Moving parts presents risks. Keep your face, hair, clothing,

hands, and feet away from all moving parts. All guards

and safety attachments must be installed properly before

using the power tool. Shut o and disconnect the power

supply before touching any parts other than the handles

and the switch.

Electrical Safety

1. Ground fault circuit interrupter (GFCI) protection should

be provided on the circuit(s) or outlet(s) to be used for

this electric chain saw. Receptacles are available having

built-in GFCI protection and may be used for this

measure of safety.

2. Make sure that the mains voltage matches that listed on

the unit's rating label. Using the improper voltage can

damage the motor and injure the user.

3. To reduce the risk of electric shock, this appliance has a

polarized plug (i.e. one blade is wider than the other).

Use this appliance only with a polarized UL-, CSA-,

or ETL-listed extension cord recommended for outdoor,

all-weather use.

The appliance plug will t into a polarized extension

cord only one way. If the appliance plug does not t

fully into the extension cord, reverse the plug. If the plug

still does not t, obtain a correct polarized extension

cord. A polarized extension cord will require the use of a

polarized wall outlet. The extension cord plug will t into

the polarized wall outlet only one way. If the plug does

not t fully into the wall outlet, reverse the plug. If the plug

still does not t, contact a qualied electrician to install

the proper wall outlet. Do not modify the appliance plug,

extension cord receptacle, or extension cord plug in any

way.

Product specificaties

Merk:	Sun Joe
Categorie:	Zaagmachine
Model:	SWJ698E-RM

Heb je hulp nodig?

Als je hulp nodig hebt met Sun Joe SWJ698E-RM stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Zaagmachine Sun Joe

Sun Joe 20VIONLTE-CS10-RM Handleiding

15 November 2024

Sun Joe SWJ802E-PRP Handleiding

15 November 2024

Sun Joe iON8PS2 Handleiding

26 Juli 2023

Sun Joe 24V-HCSWP-CT Handleiding

2 Juli 2023

Sun Joe 24V-CSSHRP-LTE-RM Handleiding

20 Juni 2023

Sun Joe SWJ803E Handleiding

17 Juni 2023

Sun Joe SWJ599E Handleiding

4 Juni 2023

Sun Joe SWJ699E-RED-RM Handleiding

10 Mei 2023

Sun Joe 24V-PS10-CT Handleiding

7 Mei 2023

Sun Joe SWJ699E-RM Handleiding

5 Mei 2023

Handleiding Zaagmachine

Nieuwste handleidingen voor Zaagmachine

Shindaiwa 269TS Handleiding

19 November 2024

Shindaiwa 320TS Handleiding

19 November 2024

Shindaiwa 488 Handleiding

19 November 2024

Shindaiwa 352s Handleiding

19 November 2024

Ergotools Pattfield E-PST 800 L Handleiding

19 November 2024

Bavaria By Einhell Bavaria BFS 600 E Handleiding

19 November 2024

Bavaria By Einhell Bavaria BSTL 800 Profi Handleiding

19 November 2024

Proviel STL 800 Handleiding

19 November 2024

Proviel PVBK 40 Handleiding

19 November 2024

Proviel PVKS 38/40 B Handleiding

19 November 2024