Sun Joe SWJ599E Handleiding

Sun Joe Zaagmachine SWJ599E

Lees hieronder de 📖 handleiding in het Nederlandse voor Sun Joe SWJ599E (72 pagina's) in de categorie Zaagmachine. Deze handleiding was nuttig voor 49 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/72

®, LLC

A Division of Snow Joe

®, LLC

OPERATOR’S MANUAL

Model SWJ599E Form No. SJ-SWJ599E-880E-MR3

ELECTRIC CHAIN SAW

14-INCH | 9-AMP

IMPORTANT!

Safety Instructions

All Operators Must Read These

Instructions Before Use

Read all the instructions contained in this manual. Keep this

manual in a safe place, so that the information is available at

all times. If you give the equipment to another person, make

sure to provide these operating instructions. Basic safety

precautions should always be followed to reduce the risk of

re, electric shock, and personal injury.

Notice the personal safety alert symbol m used in this

manual to draw your attention to a given along WARNING

with the particular operating instruction. This means that

the operation requires special ATTENTION, CAUTION, and

AWARENESS.

Intended Use

This electric chain saw was designed and manufactured for

trimming and pruning tree limbs and branches and for cutting

smaller logs up to 10 in. (25 cm) thick. All of the wooden

objects intended to be cut with this chain saw should be no

thicker than the guide bar's maximum cutting capabilities.

Improper Use

Any other use diering from the above mentioned applications

poses a serious hazard to the user and may damage both the

tool and your personal property. Examples of improper use

include, but are not limited to:

• trimming hedges;

• carving;

• sectioning pallets, crates, and various packing materials;

• sectioning furniture or other materials with nails, screws, or

other metal components;

• butchering meat;

• using the machine to lift, move, or split objects;

• using the machine while fastened to xed supports.

Improper use of the machine will invalidate the warranty,

relieve the manufacturer from all liabilities. The user will

consequently be liable for all and any damage or injury to

himself/herself or others.

General Safety

mWARNING! When using electric yard tools, basic safety

precautions should always be followed to reduce the risk of

re, electric shock, and personal injury, including the following:

1. Keep guards in place – Protective guards should be

checked periodically to ensure they are properly tted and

in correct working order.

2. Remove adjusting keys and wrenches – Check that

adjusting wrenches are removed from the saw before

turning it on.

3. Keep work area clean and well-lit – Clear work area of

branches and limbs after each cutting session. Cluttered

areas invite accidents.

4. Avoid dangerous conditions – Do not use this machine

in rainy, stormy, damp, or wet locations. Do not operate

the unit in gaseous or explosive atmospheres. Motors

in these units normally spark, and the sparks may ignite

fumes.

5. Do not use the chain saw in the rain.

6. Keep bystanders and children away – All bystanders,

including children and pets, should be kept a safe

distance away from the work area.

7. Do not force the tool – It will do the job eectively and

safely if it is used at the rate for which it was designed.

8. Use the right tool – Do not force the tool or any

attachment on the tool to do a job for which it was not

intended.

9. Wear proper apparel – Do not wear loose articles of

clothing or jewelry since such items may get caught

in moving parts. Wearing heavy-duty rubber gloves,

substantial non-skid footwear, and close-tting clothing is

recommended when working outdoors with power tools.

10. Wear protective hair coverings to contain long hair.

11. Always wear safety glasses and ear defenders to

provide eye and ear protection – Everyday eyeglasses

only have impact resistant lenses and do not provide the

same protection as safety glasses.

12. Wear face or dust masks – If the cutting operation is

dusty, the use of a face or dust mask specially designed

to lter out microscopic particles is recommended.

13. Do not overreach – Keep proper footing and balance

at all times.

14. Maintain tools with care – Keep tools sharp and clean

for the best and safest performance. Follow instructions

for lubricating and changing accessories.

15. Disconnect tool – Disconnect the chain saw from the

power supply when not in use, before servicing, when

transporting, or when changing the chain or other

accessories.

16. Reduce the risk of unintentional starting – Make sure

the switch is in the OFF position before plugging the tool

into a power source.

17. Use recommended accessories – Consult the owner’s

manual for recommended accessories. The use of

improper accessories may cause risk of injury.

18. Check for damaged parts – Before each use, repair or

replace any guard or part that is damaged. In addition,

check for alignment of moving parts, binding of moving

parts, breakage of parts, and any other conditions that

may aect the tool's operation.

19. Never leave tool unattended while it is running – Turn

the power OFF by removing the power cord directly from

its socket. Do not leave the saw until the cutting bar

comes to a complete stop.

20. Avoid unintentional starting – Do not carry the chain saw

with your nger on the switch.

21. Do not grasp the exposed cutting blade or cutting

edges when picking up or holding the saw – Be sure to

encase the cutting bar in its protective sheath when not

in use.

22. Stay alert – Watch what you are doing. Use common

sense. Do not operate the chain saw when you are tired.

23. Store idle tool indoors – When not in use, appliances

should be stored indoors in a dry and high or locked-up

place out of the reach of children.

Chain Saw Use + Care

Save all warnings and instructions for future reference. The

term “power tool” in the warnings refers to your electric chain

saw.

mWARNING! Turn o the power switch and disconnect

the power source before adjusting, inspecting, servicing

or cleaning the power tool, when changing accessories, or

when any other dangerous conditions present themselves.

All maintenance tasks should be performed after the power

tool's rotating parts have stopped completely. Such preventive

safety measures reduce the risk of starting the power tool

accidentally.

1. Do not force the power tool. Use the correct power tool

for your application. The correct power tool will perform

better with less likelihood of personal or mechanical

damage if it is used at the rate for which it was designed.

2. Do not use the power tool if the switch does not turn it on

and o. Any power tool that cannot be controlled with the

switch is dangerous and must be repaired.

3. Disconnect the unit from its power source before making

any adjustments, changing accessories, or storing the

power tool. Such preventive safety measures reduce the

risk of starting the power tool accidentally.

4. Store idle power tools indoors in a dry, locked place

out of the reach of children. Do not allow anyone who is

unfamiliar with the power tool or these instructions access

to the machine. Power tools are dangerous in the hands of

untrained users.

5. Maintain power tools with care to ensure safe operation

and optimal performance. Keep handles dry, clean, and

free from oil and grease. Check for misalignment or

obstruction of moving parts, breakage of parts, and any

other condition that may aect the power tool’s operation.

If damage is found, have the power tool repaired before

use. Many accidents are caused by poorly maintained

power tools.

6. Keep cutting tools sharp and clean. Properly maintained

cutting tools with sharp cutting edges are less likely to jam

and are easier to control.

7. Use the power tool and accessories in accordance with

these instructions, and be sure to take into account the

working conditions and the work to be performed. Using

the power tool for operations other than those intended

could result in a hazardous situation.

8. Moving parts presents risks. Keep your face, hair, clothing,

hands, and feet away from all moving parts. All guards

and safety attachments must be installed properly before

using the power tool. Shut o and disconnect the power

supply before touching any parts other than the handles

and the switch.

Electrical Safety

1. Ground fault circuit interrupter (GFCI) protection should

be provided on the circuit(s) or outlet(s) to be used for

this electric chain saw. Receptacles are available having

built-in GFCI protection and may be used for this

measure of safety.

2. Make sure that the mains voltage matches that listed on

the unit's rating label. Using the improper voltage can

damage the motor and injure the user.

3. To prevent electric shock, use only with an extension cord

suitable for outdoor use, such as SW-A, SOW-A, STW-A,

STOW-A, SJW-A, SJOW-A, SJTW-A, or SJTOW-A.

Before use, check that the extension cord is in good

condition. When using an extension cord, make sure to

use one heavy enough to carry the current your product

will draw. An undersized cord will cause a drop in line

voltage resulting in loss of power and overheating.

4. To reduce the risk of electric shock, this appliance has a

polarized plug (i.e. one blade is wider than the other). Use

this appliance only with a polarized UL-, CSA-, or ETL-

listed extension cord recommended for outdoor,

all-weather use.

The appliance plug will t into a polarized extension

cord only one way. If the appliance plug does not t

fully into the extension cord, reverse the plug. If the plug

still does not t, obtain a correct polarized extension

cord. A polarized extension cord will require the use of a

polarized wall outlet. The extension cord plug will t into

the polarized wall outlet only one way. If the plug does

not t fully into the wall outlet, reverse the plug. If the plug

still does not t, contact a qualied electrician to install

the proper wall outlet. Do not modify the appliance plug,

extension cord receptacle, or extension cord plug in any

way.

5. To prevent the appliance cord from disconnecting from the

extension cord during operation, use the extension cord

restraint hook and/or make a knot as shown in Table 1.

6. Do not abuse the cord. Never pull the chain saw by the

cord or yank the cord to disconnect it from the receptacle.

Keep the cord away from heat, oil, and sharp edges.

Double-Insulated Appliances

In a double-insulated appliance, two systems of insulation

are provided instead of grounding. No grounding means are

provided on a double-insulated appliance, nor should a means

for grounding be added to the appliance. Servicing a double-

insulated appliance requires extreme care and knowledge

of the system, and should be performed only by qualied

service personnel at an authorized Snow Joe® + Sun Joe®

dealer. Replacement parts for a double-insulated appliance

must be identical to the parts they replace. A double-insulated

appliance is marked with the words “Double Insulation” or

“Double Insulated.” The symbol (square within a square)

may also be marked on the appliance.

DOUBLE-INSULATED: GROUNDING NOT

REQUIRED. WHEN SERVICING, USE ONLY

IDENTICAL REPLACEMENT PARTS.

This electric chain saw is double-insulated, eliminating the

need for a separate grounding system. Use only identical

replacement parts. Read the instructions before servicing

double-insulated appliances. Use this chain saw only as

described in this manual.

m WARNING m

Electric shock may cause SEVERE INJURY or

DEATH. Heed these warnings:

• Do not allow any part of the electric chain saw to

make contact with water while it is in operation. If the

appliance becomes wet while turned o, wipe dry

before starting.

• Use only a UL-, CSA-, or ETL-rated extension cord

for outdoor, all-weather use.

• Do not use an extension cord over 100 ft (30 m).

• Do not touch the appliance or its plug with wet hands

or while standing in water. Wearing rubber boots

oers some protection.

EXTENSION CORD CHART

Extension Cord

Length

Wire Gauge (A.W.G.):

Up to 50 ft

(15 m)

+50 ft - 100 ft

(+15 m - 30 m)

16 14

(B) Connect plug and receptacle

Cord set Appliance cord

(A) Tie cord as shown

Table 1. Method of Securing Extension Cord

Product specificaties

Merk:	Sun Joe
Categorie:	Zaagmachine
Model:	SWJ599E

Heb je hulp nodig?

Als je hulp nodig hebt met Sun Joe SWJ599E stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Zaagmachine Sun Joe

Sun Joe 20VIONLTE-CS10-RM Handleiding

15 November 2024

Sun Joe SWJ802E-PRP Handleiding

15 November 2024

Sun Joe iON8PS2 Handleiding

26 Juli 2023

Sun Joe 24V-HCSWP-CT Handleiding

2 Juli 2023

Sun Joe 24V-CSSHRP-LTE-RM Handleiding

20 Juni 2023

Sun Joe SWJ803E Handleiding

17 Juni 2023

Sun Joe SWJ599E Handleiding

4 Juni 2023

Sun Joe SWJ699E-RED-RM Handleiding

10 Mei 2023

Sun Joe 24V-PS10-CT Handleiding

7 Mei 2023

Sun Joe SWJ699E-RM Handleiding

5 Mei 2023

Handleiding Zaagmachine

Nieuwste handleidingen voor Zaagmachine

Herkules KS 210 Profi Handleiding

17 December 2024

Total TS730301 Handleiding

16 December 2024

Total TJSLI8501 Handleiding

16 December 2024

Turbo-Silent EKS 2040/1 Handleiding

16 December 2024

Bavaria BJS 400 Handleiding

5 December 2024

Bavaria BCS 64/1 Handleiding

5 December 2024

Bavaria BEC 2040 TC Handleiding

5 December 2024

Einhell RT-SB 250 U Handleiding

4 December 2024

Einhell NSMS 4300 ZZ Handleiding

4 December 2024

Einhell RT-TS 2231 UD Handleiding

4 December 2024