Sun Joe 24V-CSSHRP-LTE-RM Handleiding
Sun Joe
Zaagmachine
24V-CSSHRP-LTE-RM
Lees hieronder de 📖 handleiding in het Nederlandse voor Sun Joe 24V-CSSHRP-LTE-RM (20 pagina's) in de categorie Zaagmachine. Deze handleiding was nuttig voor 62 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/20
© 2022 by Snow Joe
®, LLC
All rights reserved. Original instructions. SAVE THESE INSTRUCTIONS
A Division of Snow Joe
®, LLC
OPERATOR’S MANUAL
Model 24V-CSSHRP-LTE-RM Form No. SJ-24V-CSSHRP-LTE-RM-880E-M-V1
CORDLESS CHAIN SAW SHARPENER
24-VOLT MAX* | 2.0 Ah
R
© 2022 by Snow Joe
®, LLC
All rights reserved. Original instructions. SAVE THESE INSTRUCTIONS
A Division of Snow Joe
®, LLC
OPERATOR’S MANUAL
Model 24V-CSSHRP-LTE-RM Form No. SJ-24V-CSSHRP-LTE-RM-880E-M-V1
CORDLESS CHAIN SAW SHARPENER
24-VOLT MAX* | 2.0 Ah
R
IMPORTANT!
Safety Instructions
All Operators Must Read These
Instructions Before Use
Read all instructions before using this cordless chain saw
sharpener. Basic safety precautions should always be followed
to reduce the risk of re, electric shock and personal injury.
General Safety WARNINGS!
You and any other operator of this chain saw sharpener must
read, understand and follow these instructions in their entirety.
Failure to follow these instructions may result in ELECTRIC
SHOCK, FIRE and/or serious PERSONAL INJURY.
Notice the personal safety alert symbol used in this m
manual to draw your attention to a WARNING given along
with the particular operating instruction. This means that
the operation requires special ATTENTION, CAUTION
and AWARENESS.
The warnings, cautions, and instructions in this manual cannot
cover all possible conditions or situations that could occur.
Exercise common sense and caution when using this tool.
Always be aware of the environment and ensure that the tool is
used in a safe and responsible manner.
mWARNING! This machine can be dangerous! Careless
or improper use can cause serious injury.
mWARNING! The rotating grinding wheel can cut
you. Keep hands and feet away from the wheel and the
cutting area.
• Before using the chain saw sharpener, familiarize yourself
with the controls, especially how to stop the chain saw
sharpener in an emergency. The only individuals who
should use the chain saw sharpener are those who
thoroughly understand these instructions and know how
to properly operate the machine. Children should never be
allowed access to the chain saw sharpener.
• Do not allow persons to operate or assemble the product
until they have read this manual and have developed a
thorough understanding of how it works.
• Do not modify this product in any way. Unauthorized
modication may impair the function and/or safety and
could aect the life of the product. There are specic
applications for which the product was designed.
• Use the right tool for the job. DO NOT attempt to force
small equipment to do the work of larger industrial
equipment. There are certain applications for which this
equipment was designed. This product will be safer and
do a better job at the capacity for which it was intended.
DO NOT use this equipment for a purpose for which it was
not intended.
Work Area Safety
1. Keep work area clean and well lit – Cluttered, dark areas
invite accidents.
2. Avoid dangerous environments – Do not use the chain
saw sharpener in rain or in damp or wet locations. Do not
operate the chain saw sharpener in gaseous or explosive
atmospheres or use the chain saw sharpener near
ammable or combustible liquids. Motors in these tools
normally spark, and the sparks might ignite fumes.
3. Do not allow the product to come into contact with an
electrical source. The tool is not insulated and contact will
cause electrical shock.
4. Keep children, bystanders and pets away – All
spectators, including pets, should be kept a safe distance
away from the work area.
5. Make workshop kid proof with padlocks, master
switches, or by removing starter keys.
Personal Safety
1. Stay alert – Watch what you are doing. Use common
sense. Do not operate the cordless chain saw sharpener
when you are tired or under the inuence of alcohol or
drugs. A moment of inattention while operating the tool
may result in serious personal injury.
2. Dress properly – Do not wear loose articles of clothing
or jewelry. They can come into contact and get caught in
the grinding wheel or any other moving part. Non-slipping
footwear is recommended. Wear protective hair covering
to contain long hair.
3. Do not overreach – Keep proper footing and balance at
all times.
4. Never operate the machine on an unstable platform –
Always work in a safe and stable position. Serious injury
could occur if the machine is tipped or the grinding wheel
is unintentionally contacted.
5. Remove adjusting keys and wrenches – Always make
sure the adjusting keys and wrenches are removed before
turning on the machine.
1
2
6. Secure work – Use the chain guide lock to secure the
chain to free both hands for moving the motor head/
grinding wheel.
Chain Saw Sharpener Use and Care
1. Do not force the tool – It will perform better with less
likelihood of personal or mechanical injury if it is used at
the rate for which it was designed.
2. Use the right product – Do not use this machine for any
job except that for which it is intended.
3. Check for damaged parts – Carefully check that the
product will operate properly and perform its intended
function. Replace damaged or worn parts immediately.
Never operate the product with a damaged part.
4. Safety switch – Do not use a product with a malfunctioning
switch. Any power tool that cannot be controlled with the
power switch is dangerous and must be repaired by an
authorized service representative before using.
5. Disconnect the tool – Turn o the power switch and
remove the battery when it is not in use, before servicing
it, when changing accessories and when performing any
other maintenance task.
6. Store idle tool indoors – When not in use, the cordless
chain saw sharpener should be stored indoors in a dry,
locked place out of the reach of children. Inspect the tool
prior to storage and before re-use.
7. Replacement parts – When servicing this unit, use only
identical replacement parts. Replace or repair damaged
cord immediately on the charger.
8. Use recommended accessories – Consult page 17
for recommended accessories. The use of improper
accessories could cause personal injury or property
damage. To guarantee the eciency and consistent
performance of the machine, replace any worn or broken
parts with only genuine parts from Snow Joe® + Sun Joe®.
9. Moving parts – Keep hands and feet away from
moving parts.
10. Keep guard in place and in good working order –
Never start the machine without the grinding wheel
guard in place.
11. Maintain the cordless chain saw sharpener with care
– Follow the applicable maintenance instructions for
replacing parts and changing accessories. Lubrication is
not required.
12. Do not stand on the machine – Serious injury could
occur if the tool is tipped or if the cutting edge is
unintentionally contacted.
13. Never leave tool running unattended – Turn o and
remove the battery. Don’t leave tool until it comes to a
complete stop.
Service
mWARNING! Have your power tool serviced by a
qualied repair person using only identical replacement parts.
This will ensure that the safety of the power tool is maintained.
1. Replace cracked wheel immediately.
2. Always use guards and eye shields.
3. Do not overtighten the grinding wheel retainer.
4. Use only retainers furnished with the chain saw sharpener.
5. Frequently clean grinding dust that accumulate under the
chain saw sharpener.
mWARNING! Risk of injury due to accidental starting. Do
not use in an area where children may be present.
Specic Safety Rules for Chain
Saw Sharpener and the Grinding
Wheel
• Use only identical replacement grinding wheel.
• Keep hands clear from grinding wheel during use. Never try
to stop the grinding wheel by your hands.
• Electric shock hazard. Do not expose to rain or use in
damp locations.
• Do not use for wet grinding.
• Not for use by or around children.
• Always keep the hand grips clean and dry.
• Switch o the machine and disconnect battery pack from
tool before making any adjustments, changing accessories,
or storing the tool. Such preventive safety measures reduce
the risk of starting the tool accidentally.
• Do not push the On/O switch any more if the protective
circuit is triggered. This may damage the battery.
• Always wear the proper personal protective equipment
including heavy-duty gloves when handling the wheel.
• Do not use a wheel that is cracked or chipped.
• Before starting the machine, make sure the grinding wheel
is correctly secured and positioned up in rest mode. Do not
overtighten the wheel mounting retainer.
• Always ensure the appropriate wheel guards are installed.
• Store out of reach of children.
Product specificaties
| Merk: | Sun Joe |
| Categorie: | Zaagmachine |
| Model: | 24V-CSSHRP-LTE-RM |
Heb je hulp nodig?
Als je hulp nodig hebt met Sun Joe 24V-CSSHRP-LTE-RM stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Zaagmachine Sun Joe
15 November 2024
15 November 2024
26 Juli 2023
2 Juli 2023
20 Juni 2023
17 Juni 2023
4 Juni 2023
10 Mei 2023
7 Mei 2023
5 Mei 2023
Handleiding Zaagmachine
- Zaagmachine Bosch
- Zaagmachine AEG
- Zaagmachine DeWalt
- Zaagmachine Ford
- Zaagmachine Al-ko
- Zaagmachine Atika
- Zaagmachine BabyGO
- Zaagmachine Batavia
- Zaagmachine Bavaria
- Zaagmachine Bebe Confort
- Zaagmachine BGU
- Zaagmachine Black Decker
- Zaagmachine Blucave
- Zaagmachine Bort
- Zaagmachine Brennenstuhl
- Zaagmachine Bruder Mannesmann
- Zaagmachine Budget
- Zaagmachine Defort
- Zaagmachine Dolmar
- Zaagmachine Dremel
- Zaagmachine Duro
- Zaagmachine Duro Pro
- Zaagmachine Echo
- Zaagmachine Einhell
- Zaagmachine Elektra Beckum
- Zaagmachine Elu
- Zaagmachine Ergofix
- Zaagmachine Exakt
- Zaagmachine Fein
- Zaagmachine Felisatti
- Zaagmachine Ferm
- Zaagmachine Ferrex
- Zaagmachine Festool
- Zaagmachine Flex
- Zaagmachine Florabest
- Zaagmachine FOM
- Zaagmachine Fuxtec
- Zaagmachine Gamma
- Zaagmachine Gardena
- Zaagmachine Gardenline
- Zaagmachine Germania
- Zaagmachine Global
- Zaagmachine Goon
- Zaagmachine Greenworks
- Zaagmachine Grizzly
- Zaagmachine Gude
- Zaagmachine Gude Pro
- Zaagmachine Hammer
- Zaagmachine Hikoki
- Zaagmachine Hitachi
- Zaagmachine Holzmann
- Zaagmachine Homelite
- Zaagmachine Husqvarna
- Zaagmachine Huvema
- Zaagmachine Hyundai
- Zaagmachine Ideal
- Zaagmachine Kompernass
- Zaagmachine Kress
- Zaagmachine Lux Tools
- Zaagmachine Luxor
- Zaagmachine Maestro
- Zaagmachine Makita
- Zaagmachine Maktec
- Zaagmachine Matrix
- Zaagmachine Max
- Zaagmachine Maxx
- Zaagmachine McCulloch
- Zaagmachine Metabo
- Zaagmachine Milwaukee
- Zaagmachine Parkside
- Zaagmachine Pattfield
- Zaagmachine Plantiflor
- Zaagmachine Powerfix
- Zaagmachine Powerplus
- Zaagmachine Remington
- Zaagmachine Robust
- Zaagmachine Ryobi
- Zaagmachine Scheppach
- Zaagmachine Shindaiwa
- Zaagmachine Silverline
- Zaagmachine Skil
- Zaagmachine Solo
- Zaagmachine Stanley
- Zaagmachine Sterwins
- Zaagmachine Stiga
- Zaagmachine Stihl
- Zaagmachine Tanaka
- Zaagmachine Texas
- Zaagmachine Toledo
- Zaagmachine Toolcraft
- Zaagmachine Topcraft
- Zaagmachine Triton
- Zaagmachine Trotec
- Zaagmachine Troy-Bilt
- Zaagmachine Varo
- Zaagmachine Vonroc
- Zaagmachine Westfalia
- Zaagmachine Workzone
- Zaagmachine Worx
- Zaagmachine Zipper
- Zaagmachine Oregon Scientific
- Zaagmachine Ozito
- Zaagmachine Black And Decker
- Zaagmachine Cocraft
- Zaagmachine Draper
- Zaagmachine Meec Tools
- Zaagmachine Lionelo
- Zaagmachine Clarke
- Zaagmachine Genesis
- Zaagmachine Hilti
- Zaagmachine Cobra
- Zaagmachine Hobart
- Zaagmachine ACG
- Zaagmachine Cotech
- Zaagmachine Power Craft
- Zaagmachine Tacklife
- Zaagmachine Truper
- Zaagmachine Fieldmann
- Zaagmachine Mafell
- Zaagmachine Prime3
- Zaagmachine Proxxon
- Zaagmachine Biltema
- Zaagmachine Porter-Cable
- Zaagmachine Yard Force
- Zaagmachine Challenge
- Zaagmachine EGO
- Zaagmachine Hurricane
- Zaagmachine MacAllister
- Zaagmachine Maruyama
- Zaagmachine Sovereign
- Zaagmachine Spear & Jackson
- Zaagmachine Royal Catering
- Zaagmachine Dedra
- Zaagmachine Graphite
- Zaagmachine Narex
- Zaagmachine RIDGID
- Zaagmachine Tryton
- Zaagmachine CMI
- Zaagmachine Garland
- Zaagmachine Herkules
- Zaagmachine Powerworks
- Zaagmachine MSW
- Zaagmachine Sthor
- Zaagmachine Evolution
- Zaagmachine Craftsman
- Zaagmachine Rikon
- Zaagmachine Verto
- Zaagmachine Erbauer
- Zaagmachine Snow Joe
- Zaagmachine Chicago Pneumatic
- Zaagmachine Alpha Tools
- Zaagmachine Hazet
- Zaagmachine Yato
- Zaagmachine Jonsered
- Zaagmachine Qualcast
- Zaagmachine Total
- Zaagmachine Avantco
- Zaagmachine Bestgreen
- Zaagmachine Masport
- Zaagmachine Morrison
- Zaagmachine Stalco
- Zaagmachine Baumr-AG
- Zaagmachine Martha Stewart
- Zaagmachine IKRA
- Zaagmachine MTM
- Zaagmachine Meister Craft
- Zaagmachine Łucznik
- Zaagmachine King Craft
- Zaagmachine Max Bahr
- Zaagmachine Toolson
- Zaagmachine Wolfcraft
- Zaagmachine Kreg
- Zaagmachine Vulcan
- Zaagmachine Anova
- Zaagmachine Challenge Xtreme
- Zaagmachine Pro-Cut
- Zaagmachine Power Smart
- Zaagmachine Backyard Pro Butcher Series
- Zaagmachine EFA
- Zaagmachine Einhell Bavaria
- Zaagmachine McKenzie
- Zaagmachine Prowork
- Zaagmachine Proviel
- Zaagmachine Backyard Pro
- Zaagmachine Ultranatura
- Zaagmachine FIXIT
- Zaagmachine Ergotools Pattfield
- Zaagmachine MyTool
- Zaagmachine Bavaria By Einhell
- Zaagmachine Donau Elektronik
- Zaagmachine Rona
- Zaagmachine TAURUS Titanium
- Zaagmachine Maxbear
- Zaagmachine Extralink
- Zaagmachine Yellow Garden Line
- Zaagmachine Turbo-Silent
Nieuwste handleidingen voor Zaagmachine
17 December 2024
16 December 2024
16 December 2024
16 December 2024
5 December 2024
5 December 2024
5 December 2024
4 December 2024
4 December 2024
4 December 2024