Sun Joe ION8PS2-RM Handleiding

Sun Joe Zaagmachine ION8PS2-RM

Lees hieronder de 📖 handleiding in het Nederlandse voor Sun Joe ION8PS2-RM (28 pagina's) in de categorie Zaagmachine. Deze handleiding was nuttig voor 24 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/28
A Division of Snow Joe
®, LLC Model iON8PS2-RM Form No. SJ-iON8PS2-RM-880E-V1
R
OPERATOR’S MANUAL
CORDLESS POLE CHAIN SAW
8-INCH | 40-VOLT MAX*
THANKS FOR YOUR PURCHASE
OF A REMANUFACTURED PRODUCT.
snowjoe.com
To make sure you get the most out of
your
product, be sure to register online at
to enjoy full product support.
PASTE UPC LABEL HERE
© 2020 by Snow Joe
®, LLC
All rights reserved. Original instructions.
2
A Division of Snow Joe
®, LLC Model iON8PS2-RM Form No. SJ-iON8PS2-RM-880E-V1
R
OPERATOR’S MANUAL
CORDLESS POLE CHAIN SAW
8-INCH | 40-VOLT MAX*
SAVE THESE INSTRUCTIONS
IMPORTANT!
Safety Instructions
All Operators Must Read These
Instructions Before Use
Always follow these safety guidelines. Failure to do so may
result in serious bodily injury or death.
mDANGER! This indicates a hazardous situation, which,
if not followed, will result in serious injury or death.
mWARNING! This indicates a hazardous situation, which,
if not avoided, could result in serious injury or death.
mCAUTION! This indicates a hazardous situation, which,
if not avoided, could result in minor or moderate injury.
General Safety
mWARNING! When using cordless yard tools, basic
safety precautions should always be followed to reduce the
risk of re, electric shock and personal injury, including the
following:
1. Keep guards in placeProtective guards should be
checked periodically to ensure they are properly tted and
in correct working order.
2. Keep work area clean and well-lit – Clear work area of
branches and limbs after each cutting session. Cluttered
areas invite accidents.
3. Do not use in dangerous environments – Do not use
power tools in damp or wet locations.
4. Do not use the pole chain saw in the rain.
5. Keep bystanders and children away – All bystanders,
including children and pets, should be kept a safe
distance away from the work area.
6. Do not force the tool – It will do the job eectively and
safely if it is used at the rate for which it was designed.
7. Use the right tool – Do not force the tool or any
attachment on the tool to do a job for which they were
not designed.
8. Wear proper apparel – Do not wear loose articles of
clothing or jewelry since such items may get caught
in moving parts. Use of heavy-duty rubber gloves,
substantial non-skid footware and close-tting clothing is
recommended when working outdoors with power tools.
9. Wear protective hair coverings to contain long hair.
10. Always wear safety glasses and ear defenders to
provide eye and ear protection – Everyday eyeglasses
only have impact resistant lenses and do not provide the
same protection as safety glasses.
11. Wear face or dust masks – If the cutting operation is
dusty, the use of a face or dust mask specially designed
to lter out miscoscopic particles is recommended.
12. Do not overreach – Keep proper footing and balance
at all times.
13. Maintain tools with care – Keep tools sharp and clean
for best and safest performance. Follow instructions for
lubricating and changing accessories.
14. Disconnect tool – Turn o the power switch and remove
the battery when it is not in use, before servicing, when
transporting or when changing the chain or
other accessories.
15. Reduce the risk of unintentional starting – Make sure
the safety switch and the trigger switch are in the OFF
position before inserting the battery in the unit. Do not
carry the pole chain saw with the safety switch and the
trigger switch engaged.
16. Use recommended accessories – Consult the owner’s
manual for recommended accessories. The use of
improper accessories may cause risk of injury.
17. Check for damaged parts – Before each use, repair or
replace any guard or part that is damaged. In addition,
check for alignment of moving parts, binding of moving
parts, breakage of parts and any other conditions that
may aect the tool's operation. A guard or other part that
is damaged should be properly repaired or replaced by an
authorized service center.
18. Never leave tool unattended while it is running –
Turn the power OFF by removing the battery from the
unit. Do not leave the saw until the cutting bar comes to a
complete stop.
19. Do not grasp the exposed cutting blade or cutting
edges when picking up or holding the saw – Be sure to
encase the cutting bar in its protective sheath when not
in use.
20. Stay alertWatch what you are doing. Use common
sense. Do not operate the pole chain saw when you
are tired.
21. Store idle tool indoors – When not in use, appliances
should be stored indoors in a dry and high or locked-up
place out of the reach of children.
3
Specic Safety Rules For
Pole Chain Saws
mWARNING! To protect yourself from SHOCK HAZARD!
electrocution, do not operate the pole chain saw within
50 ft (15 m) of overhead wires. Failure to follow this instruction
could result in severe personal injury.
mWARNING! Read all safety warnings and all
instructions. Failure to follow the warnings and instructions
may result in electric shock, re and/or serious injury.
Save all warnings and instructions for future reference.
The term “power tool” in the warnings refers to your
battery-operated (cordless) power tool.
Before using
1. Study this manual thoroughly.
2. Familiarize yourself with the operation of the pole chain
saw and learn to use it properly.
3. Never permit others (especially children) who have not
read the manual to use the machine.
4. If the unit must be given to other people, give them
this manual.
5. Never remove the labels or security elements.
6. Do not use the pole chain saw if the trigger on/o switch
does not work properly. If necessary, contact your dealer
for any repair.
7. Never expose the pole chain saw to rain or moisture.
Never allow water or other liquids to enter the machine.
8. Check the oil level before each use of the pole chain saw.
Never use the pole chain saw without oil in the tank or
when the amount of oil is low.
9. Check the condition of the chain guide, chain, fasteners
and safety switch before each use. Replace excessively
worn or missing parts.
10. Do not start the pole chain saw if the chain/sprocket end
cover is not installed.
11. Do not cut near other electrical machines.
12. Do not operate the pole chain saw in an environment with
ammable materials such as liquids, gases or dust. The
sparks generated by the operation of the machine can
cause an explosion.
13. Do not start cutting until the work area is cleared and
cleaned. Keep the work area clean and tidy to reduce the
risk of an accident.
14. For the rst use, it is recommended that the user be
accompanied by an experienced person.
15. Keep all parts of the body away from the pole chain saw.
Do not remove cut material or hold material to be cut
when blades are moving. Make sure the switch is o when
clearing jammed material, as the chain saw continues
to move after the switch is turned o. A moment of
inattention while operating the pole chain saw may result
in serious personal injury.
16. Carry the pole chain saw by the handle with the unit
turned o. When transporting or storing the pole chain
saw, always use the chain saw cover. Proper handling of
the pole chain saw will reduce possible personal injury.
17. Hold the pole chain saw by insulated gripping surfaces
only, because the chain saw may contact hidden wiring.
A chain saw contacting a ″live″ wire may make exposed
metal parts of the pole chain saw ″live″ and could give the
operator an electric shock.
18. Do not use the pole chain saw in bad weather conditions,
especially when there is a risk of lightning.
19. Always use head protection when operating the pole chain
saw overhead. Falling debris can result in serious personal
injury.
When using
1. Use the pole chain saw only in daylight or good
articial light.
2. The use of power equipment can be regulated. Remember
to comply with legal regulations which may dier from one
location to another.
3. Do not use the pole chain saw if you are tired or ill.
Also avoid use if you have consumed alcohol or taken
drugs. A moment of inattention can result in serious injury.
4. When using, keep your hair away from the machine.
Never wear loose clothing or accessories such as
neckties, cords, scarves or jewelry that could get caught
in the machine or in the cutting system.
5. Wear close-tting clothing to help protect you from cuts.
Always wear long pants, sturdy non-slip shoes and
protective equipment such as gloves, goggles, a helmet
with a visor and an acoustic shield.
6. Do not allow anyone to remain in the range of the pole
chain saw during use. Keep people, children and animals
away from the work area. If conducting group work,
keep sucient distance between people.
7. Make sure that the handles are clean and dry. When the
pole chain saw is running, always rmly grip the front
handle with your left hand and the rear handle with your
right hand.
8. Always maintain a stable, balanced and rm stance during
operation. Do not work on slippery or unstable ground.
9. Firmly hold the pole chain saw with both hands.
Put yourself in a position that allows you to withstand the
forces applied by a backlash. Never let go of the machine.
10. Always start sawing with the moving chain running.
11. Do not saw with the tip of the saw guide bar.
12. During cutting, some tension on the wood may be
released suddenly and cause springbacks or hazardous
releases.
13. Never use the pole chain saw above shoulder height
when cutting.
14. Never operate a damaged machine.
15. Do not overload the machine.


Product specificaties

Merk: Sun Joe
Categorie: Zaagmachine
Model: ION8PS2-RM

Heb je hulp nodig?

Als je hulp nodig hebt met Sun Joe ION8PS2-RM stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Zaagmachine Sun Joe

Handleiding Zaagmachine

Nieuwste handleidingen voor Zaagmachine