Sun Joe BDL-A0053 Handleiding

Sun Joe Zaagmachine BDL-A0053

Lees hieronder de 📖 handleiding in het Nederlandse voor Sun Joe BDL-A0053 (48 pagina's) in de categorie Zaagmachine. Deze handleiding was nuttig voor 24 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/48

®, LLC

A Division of Snow Joe

®, LLC

OPERATOR’S MANUAL

Model 24V-HCS-LTE-P1 Form No. SJ-24V-HCS-LTE-P1-880E-M

CORDLESS PRUNING SAW

24V MAX* | 2.0 Ah | 5-INCH

IMPORTANT!

Safety Instructions

All Operators Must Read These

Instructions Before Use

Read all safety warnings and all instructions. Failure to follow

the warnings and instructions may result in electric shock, re

and/or serious injury. Save all warnings and instructions for

future reference.

mDANGER! This indicates a hazardous situation, which,

if not followed, will result in serious injury or death.

mWARNING! This indicates a hazardous situation, which,

if not avoided, could result in serious injury or death.

mCAUTION! This indicates a hazardous situation, which,

if not avoided, could result in minor or moderate injury.

Intended Use

This cordless prunning saw was designed and manufactured

for trimming and pruning tree limbs and branches and for

cutting smaller logs up to recommended 4.5 inch

(11.4 cm), not to exceed a max. cut of 5.5 in. (14 cm) in

diameter depending on type of wood. All of the wooden

objects intended to be cut with this pruning saw should be no

thicker than the guide bar's maximum cutting capabilities.

Any other use diering from the above mentioned applications

poses a serious hazard to the user and may damage both the

tool and your personal property. Improper use of the machine

will invalidate the warranty, relieve the manufacturer from all

liabilities. The user will consequently be liable for all and any

damage or injury to himself/herself or others.

General Power Tool Safety

Warnings

mWARNING! Read all safety warnings, instructions,

illustrations and specications provided with this power tool.

Failure to follow all instructions listed below may result in

electric shock, re and/or serious injury. Save all warnings and

instructions for future reference.

Work Area Safety

1. Keep work area clean and well lit – Cluttered or dark

areas invite accidents.

2. Do not operate power tools in explosive atmospheres,

such as in the presence of ammable liquids, gases

or dust – Power tools create sparks which may ignite the

dust or fumes.

3. Keep children and bystanders away while operating a

power tool – Distractions can cause you to lose control.

Electric Safety

1. Power tool plugs must match the outlet. Never modify

the plug in any way. Do not use any adapter plugs with

earthed (grounded) power tools – Unmodied plugs and

matching outlets will reduce risk of electric shock.

2. Avoid body contact with earthed or grounded

surfaces, such as pipes, radiators, ranges and

refrigerators – There is an increased risk of electric shock

if your body is earthed or grounded.

3. Do not abuse the cord. Never use the cord for

carrying, pulling or unplugging the power tool. Keep

cord away from heat, oil, sharp edges or moving parts

– Damaged or entangled cords increase the risk of electric

shock

4. When operating a power tool outdoors, use an

extension cord suitable for outdoor use – Use of a cord

suitable for outdoor use reduces the risk of electric shock.

5. If operating a power tool in a damp location is

unavoidable, use a RESIDUAL CURRENT DEVICE

(RCD) protected supply – Use of an RCD reduces the

risk of electric shock

Personal Safety

1. Stay alert, watch what you are doing and use common

sense when operating a power tool. Do not use a

power tool while you are tired or under the inuence

of drugs, alcohol or medication – A moment of

inattention while operating power tools may result in

serious personal injury.

2. Use personal protective equipment. Always wear

eye protection – Protective equipment such as dust

mask, non-skid safety shoes, hard hat, or hearing

protection used for appropriate conditions will

reduce personal injuries.

3. Prevent unintentional starting. Ensure the switch is

in the o-position before connecting battery pack,

picking up or carrying the tool – Carrying power tools

with your nger on the switch or energising power tools

that have the switch on invites accidents.

4. Remove any adjusting key or wrench before

turning the power tool on – A wrench or a key left

attached to a rotating part of the power tool may result

in personal injury.

5. Do not overreach. Keep proper footing and balance at

all times – This enables better control of the power tool in

unexpected situations.

6. Dress properly. Do not wear loose clothing or jewelry.

Keep your hair, clothing and gloves away from moving

parts – Loose clothes, jewellery or long hair can be

caught in moving parts.

7. If devices are provided for the connection of dust

extraction and collection facilities, ensure these are

connected and properly used – Use of dust collection

can reduce dust-related hazards.

8. Do not let familiarity gained from frequent use of tools

allow you to become complacent and ignore tool

safety principles. A careless action can cause severe

injury within a fraction of a second.

Power Tool Use and Care

1. Do not force the power tool. Use the correct power

tool for your application – The correct power tool will

do the job better and safer at the rate for which it was

designed.

2. Do not use the power tool if the switch does not turn

it on and o – Any power tool that cannot be controlled

with the switch is dangerous and must be repaired.

3. Disconnect the battery pack from the power

tool before making any adjustments, changing

accessories, or storing power tools – Such

preventive safety measures reduce the risk of starting

the power tool accidentally.

4. Store idle power tools out of the reach of children and

do not allow persons unfamiliar with the power tool or

these instructions to operate the power tool – Power

tools are dangerous in the hands of untrained users.

5. Maintain power tools. Check for misalignment or

binding of moving parts, breakage of parts and any

other condition that may aect the power tool’s

operation. If damaged, have the power tool repaired

before use – Many accidents are caused by poorly

maintained power tools.

6. Keep cutting tools sharp and clean – Properly

maintained cutting tools with sharp cutting edges are less

likely to bind and are easier to control.

7. Use the power tool, accessories etc. in accordance

with these instructions, taking into account the

working conditions and the work to be performed –

Use of the power tool for operations dierent from those

intended could result in a hazardous situation.

8. Keep handles and grasping surfaces dry, clean and

free from oil and grease. Slippery handles and grasping

surfaces do not allow for safe handling and control of the

tool in unexpected situations.

Battery Tool Use and Care

mWARNING! Read all safety warnings and instructions.

Failure to follow the warnings and instructions may result in

electric shock, re and/or serious injury.

1. Recharge only with the charger specied by the

manufacturer. A charger that is suitable for one type of

battery pack may create a risk of re when used with

another battery pack.

2. Use appliances only with specically designated battery

packs. Use of any other battery packs may create a risk of

injury and re.

3. When the battery pack is not in use, keep it away from

other metal objects, like paper clips, coins, keys, nails,

screws or other small metal objects, that can make a

connection from one terminal to another. Shorting the

battery terminals together may cause burns or a re.

4. Under abusive conditions, liquid may be ejected from

the battery; avoid contact. If contact accidentally occurs,

ush with water. If liquid contacts eyes, additionally seek

medical help. Liquid ejected from the battery may cause

irritation or burns.

5. Do not use a battery pack or appliance that is damaged

or modied. Damaged or modied batteries may exhibit

unpredictable behavior resulting in re, explosion or risk of

injury.

6. Do not expose a battery pack or appliance to re or

excessive temperature. Exposure to re or temperature

above 104°F(40.5°C) may cause explosion.

7. Follow all charging instructions and do not charge the

battery pack or appliance outside of the temperature

range specied in the instructions. Charging improperly

or at temperatures outside of the specied range may

damage the battery and increase the risk of re.

8. Do not modify or attempt to repair the appliance or the

battery pack (as applicable) except as indicated in the

instructions for use and care.

Service

1. Have your power tool serviced by a qualied repair

person using only identical replacement parts. This will

ensure that the safety of the power tool is maintained.

2. Never service damaged battery packs. Service

of battery packs should only be performed by the

manufacturer or authorized service providers.

Safety Instructions for

Pruning Saws

General Pruning Saw Safety Warnings

• Keep all parts of the body away from the saw chain

when the pruning saw is operating. Before you start

the pruning saw, make sure the saw chain is not

contacting anything. A moment of inattention while

operating the pruning saw may cause entanglement of

your clothing or body with the saw chain.

• Hold the power tool by insulated gripping surfaces

only, because the saw chain may contact hidden

wiring. Saw chains contacting a "live" wire may make

exposed metal part of the power tool "live" and give the

operator a electric shock.

• Wear safety glasses and hearing protection. Further

protective equipment for head, hands, legs and feet is

recommended. Adequate protective clothing will reduce

personal injury by ying debris or accidental contact with

the saw chain.

• Always keep proper footing and operate the pruning

saw only when standing on a xed, secured and level

surface. Slippery or unstable surfaces such as ladders

may cause a loss of balance or control of the saw.

• When cutting a limb that is under tension, be cautious

of spring back. When the tension in the wood bers is

released, the spring-loaded limb may strike the operator

and/or throw the pruning saw out of control.

• Use extreme caution when cutting brush and saplings.

The slender material may catch the saw chain and be

whipped toward you or pull you o balance.

• Carry the saw by the handle with the saw switched

o and away from your body. When transporting or

storing the saw, always t the guide bar cover. Proper

handling of the saw will reduce the likelihood of accidental

contact with the moving saw chain.

• Follow instructions for lubricating, chain tensioning

and changing accessories. An improperly tensioned or

poorly lubricated chain may either break or increase the

chance for kickback.

• Cut wood only. Do not use the pruning saw for any

other purpose. For example, do not use the pruning

saw to cut plastic, masonry or non-wood building

materials. Using the pruning saw in these incorrect ways

could result in serious damage to you and your tool.

• Keep guards in place. Protective guards should be

checked periodically to ensure they are properly tted and

in correct working order.

• Do not grasp the exposed cutting blade or cutting edges

when picking up or holding the saw. Be sure to encase the

cutting bar in its protective sheath when not in use.

• This saw is not intended for tree felling. Use of the

saw for operations dierent than intended could result in

serious injury to the operator or bystanders.

Causes and operator prevention of

kickback

Kickback may occur when the nose or tip of the guide bar

touches an object, or when the wood closes in and pinches

the saw chain in the cut.

Tip contact in some cases may cause a sudden reverse

reaction, kicking the guide bar up and back towards the

operator.

Pinching the saw chain along the top of the guide bar may

push the guide bar rapidly back towards the operator.

Either of these reactions may cause you to lose control of the

saw which could result in serious personal injury. Do not rely

exclusively upon the safety devices built into your saw. As a

pruning saw user, you should take several steps to keep your

cutting jobs free from accident or injury.

Kickback is the result of tool misuse and/or incorrect operating

procedures or conditions and can be avoided by taking proper

precautions as given below:

• Maintain a rm grip, with thumb and ngers encircling

the saw handle and position your body and arm to

allow you to resist kick-back forces. Kick-back forces

can be controlled by the operator, if proper precautions

are taken. Do not let go of the saw.

• Do not overreach and do not cut above shoulder

height. This helps prevent unintended tip contact and

enables better control of the unit in unexpected situations.

• Only use replacement bars and chains specied by the

manufacturer. Incorrect replacement of bars and chains

may cause chain breakage and/or kickback.

• Never use a dull or loose chain. Keep the chain sharp and

properly tensioned.

• Follow the manufacturer’s sharpening and

maintenance instructions for the saw chain. Decreasing

the depth gauge height can lead to increased kickback.

Additional safety instructions

for Pruning Saw

• The pruning saw is designed for cutting branches. Only

use the pruning saw as indicated in this manual for

cutting wood. The machine has not been designed for

continuous, professional use.

• Keep the pruning saw out of reach of children. It is not a

toy.

• Persons with limited physical, sensorial or mental abilities

are not allowed to use the pruning saw, unless they

are supervised for their safety by a qualied person or

are briefed by the responsible person how to use the

machine.

• Children and adolescents are not allowed to use the

pruning saw. Excluded from this prohibition are young

people over 16 years of age under the supervision of an

expert for the purpose of training.

Product specificaties

Merk:	Sun Joe
Categorie:	Zaagmachine
Model:	BDL-A0053

Heb je hulp nodig?

Als je hulp nodig hebt met Sun Joe BDL-A0053 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Zaagmachine Sun Joe

Sun Joe 20VIONLTE-CS10-RM Handleiding

15 November 2024

Sun Joe SWJ802E-PRP Handleiding

15 November 2024

Sun Joe iON8PS2 Handleiding

26 Juli 2023

Sun Joe 24V-HCSWP-CT Handleiding

2 Juli 2023

Sun Joe 24V-CSSHRP-LTE-RM Handleiding

20 Juni 2023

Sun Joe SWJ803E Handleiding

17 Juni 2023

Sun Joe SWJ599E Handleiding

4 Juni 2023

Sun Joe SWJ699E-RED-RM Handleiding

10 Mei 2023

Sun Joe 24V-PS10-CT Handleiding

7 Mei 2023

Sun Joe SWJ699E-RM Handleiding

5 Mei 2023

Handleiding Zaagmachine

Nieuwste handleidingen voor Zaagmachine

Anova E60CS Handleiding

20 December 2024

Silverline 447132 Handleiding

19 December 2024

Silverline 427644 Handleiding

19 December 2024

Herkules KS 210 Profi Handleiding

17 December 2024

Total TS730301 Handleiding

16 December 2024

Total TJSLI8501 Handleiding

16 December 2024

Turbo-Silent EKS 2040/1 Handleiding

16 December 2024

Bavaria BJS 400 Handleiding

5 December 2024

Bavaria BCS 64/1 Handleiding

5 December 2024

Bavaria BEC 2040 TC Handleiding

5 December 2024