Sun Joe 24V-X2-CS16-CT Handleiding

Sun Joe Zaagmachine 24V-X2-CS16-CT

Lees hieronder de 📖 handleiding in het Nederlandse voor Sun Joe 24V-X2-CS16-CT (28 pagina's) in de categorie Zaagmachine. Deze handleiding was nuttig voor 28 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/28

®, LLC

A Division of Snow Joe

®, LLC

OPERATOR’S MANUAL

Model 24V-X2-CS16-CT Form No. SJ-24V-X2-CS16-CT-880E-M

RCORDLESS CHAIN SAW – CORE TOOL

48-VOLT MAX* | 16-INCH

IMPORTANT!

Safety Instructions

All Operators Must Read These

Instructions Before Use

Read all safety warnings and all instructions. Failure to follow

the warnings and instructions may result in electric shock, re

and/or serious injury. Save all warnings and instructions for

future reference.

mDANGER! This indicates a hazardous situation, which,

if not followed, will result in serious injury or death.

mWARNING! This indicates a hazardous situation, which,

if not avoided, could result in serious injury or death.

mCAUTION! This indicates a hazardous situation, which,

if not avoided, could result in minor or moderate injury.

Intended Use

This cordless chain saw was designed and manufactured for

trimming and pruning tree limbs and branches and for cutting

smaller logs up to recommended 14.5 inch (36.8 cm), not to

exceed a max. cut of 15.5 in. (39.4 cm) in diameter depending

on type of wood. All of the wooden objects intended to be cut

with this chain saw should be no thicker than the guide bar's

maximum cutting capabilities.

Improper Use

Any other use diering from the above mentioned applications

poses a serious hazard to the user and may damage both the

tool and your personal property. Examples of improper use

include, but are not limited to:

• Trimming hedges;

• Carving;

• Sectioning pallets, crates, and various packing materials;

• Sectioning furniture or other materials with nails, screws, or

other metal components;

• Butchering meat;

• Using the machine to lift, move, or split objects;

• Using the machine while fastened to xed supports.

Improper use of the machine will invalidate the warranty,

relieve the manufacturer from all liabilities. The user will

consequently be liable for all and any damage or injury to

himself/herself or others.

General Safety

mWARNING! When using cordless yard tools, basic

safety precautions should always be followed to reduce the

risk of re, electric shock, and personal injury, including

the following:

Work Area Safety

1. Keep work area clean and well lit – Cluttered or dark

areas invite accidents.

2. Do not operate power tools in explosive atmospheres,

such as in the presence of ammable liquids, gases

or dust – Power tools create sparks which may ignite the

dust or fumes.

3. Keep children and bystanders away while operating a

power tool – Distractions can cause you to lose control.

Electric Safety

1. Power tool plugs must match the outlet. Never modify

the plug in any way. Do not use any adapter plugs with

earthed (grounded) power tools. Unmodied plugs and

matching outlets will reduce risk of electric shock.

2. Avoid body contact with earthed or grounded

surfaces, such as pipes, radiators, ranges and

refrigerators – There is an increased risk of electric shock

if your body is earthed or grounded.

3. Do not expose power tools to rain or wet conditions

– Water entering a power tool will increase the risk of

electric shock.

4. Do not abuse the cord. Never use the cord for

carrying, pulling or unplugging the power tool. Keep

cord away from heat, oil, sharp edges or moving parts.

Damaged or entangled cords increase the risk of electric

shock.

5. When operating a power tool outdoors, use an

extension cord suitable for outdoor use. Use of a cord

suitable for outdoor use reduces the risk of electric shock.

6. If operating a power tool in a damp location is

unavoidable, use a residual current device (RCD)

protected supply. Use of an RCD reduces the risk of

electric shock.

Personal Safety

1. Stay alert, watch what you are doing and use common

sense when operating a power tool. Do not use a

power tool while you are tired or under the inuence

of drugs, alcohol or medication – A moment of

inattention while operating power tools may result in

serious personal injury.

2. Use personal protective equipment. Always wear

eye protection – Protective equipment such as dust

mask, non-skid safety shoes, hard hat, or hearing

protection used for appropriate conditions will

reduce personal injuries.

3. Prevent unintentional starting. Ensure the switch is

in the o-position before connecting battery packs,

picking up or carrying the tool – Carrying power tools

with your nger on the switch or energising power tools

that have the switch on invites accidents.

4. Remove any adjusting key or wrench before

turning the power tool on – A wrench or a key left

attached to a rotating part of the power tool may result

in personal injury.

5. Do not overreach. Keep proper footing and balance at

all times – This enables better control of the power tool in

unexpected situations.

6. Dress properly. Do not wear loose clothing or

jewellery. Keep your hair, clothing and gloves away

from moving parts – Loose clothes, jewellery or long hair

can be caught in moving parts.

7. If devices are provided for the connection of dust

extraction and collection facilities, ensure these are

connected and properly used – Use of dust collection

can reduce dust-related hazards.

Power Tool Use and Care

1. Do not force the power tool. Use the correct

power tool for your application – The correct power

tool will do the job better and safer at the rate for which

it was designed.

2. Do not use the power tool if the switch does not turn

it on and o – Any power tool that cannot be controlled

with the switch is dangerous and must be repaired.

3. Disconnect the battery packs from the power

tool before making any adjustments, changing

accessories, or storing power tools – Such

preventive safety measures reduce the risk of starting

the power tool accidentally.

4. Store idle power tools out of the reach of children and

do not allow persons unfamiliar with the power tool or

these instructions to operate the power tool – Power

tools are dangerous in the hands of untrained users.

5. Maintain power tools. Check for misalignment or

binding of moving parts, breakage of parts and any

other condition that may aect the power tool’s

operation. If damaged, have the power tool repaired

before use – Many accidents are caused by poorly

maintained power tools.

6. Keep cutting tools sharp and clean – Properly

maintained cutting tools with sharp cutting edges are less

likely to bind and are easier to control.

7. Use the power tool, accessories etc. in accordance

with these instructions, taking into account the

working conditions and the work to be performed –

Use of the power tool for operations dierent from those

intended could result in a hazardous situation.

Battery tool use and care

1. Recharge only with the charger specied by the

manufacturer – A charger that is suitable for one type

of battery pack may create a risk of re when used with

another battery pack.

2. Use power tools only with specically designated

battery packs – Use of any other battery packs may

create a risk of injury and re.

3. When battery packs are not in use, keep them away

from other metal objects, like paper clips, coins, keys,

nails, screws or other small metal objects, that can

make a connection from one terminal to another –

Shorting the battery terminals together may cause burns

or a re.

4. Under abusive conditions, liquid may be ejected from

the battery; avoid contact. If contact accidentally

occurs, ush with water. If liquid contacts eyes,

additionally seek medical help – Liquid ejected from the

battery may cause irritation or burns.

Service

Have your power tool serviced by a qualied repair person

using only identical replacement parts. This will ensure that

the safety of the power tool is maintained

Chain Saw Safety Warnings

• Keep guards in place. Protective guards should be

checked periodically to ensure they are properly tted and

in correct working order.

• Do not grasp the exposed cutting blade or cutting edges

when picking up or holding the saw. Be sure to encase the

cutting bar in its protective sheath when not in use.

• Keep all parts of the body away from the saw chain

when the chain saw is operating. Before you start the

chain saw, make sure the saw chain is not contacting

anything. A moment of inattention while operating the

chain saw may cause entanglement of your clothing or

body with the saw chain.

• Always hold the chain saw with your right hand on

the rear handle and your left hand on the front handle.

Holding the chain saw with a reversed hand conguration

increases the risk of personal injury and should never be

done.

• Hold the power tool by insulated gripping surfaces

only, because the saw chain may contact hidden

wiring. Saw chains contacting a "live" wire may make

exposed metal part of the power tool "live" and give the

operator a electric shock.

• Wear safety glasses and hearing protection. Further

protective equipment for head, hands, legs and feet is

recommended. Adequate protective clothing will reduce

personal injury by ying debris or accidental contact with

the saw chain.

• Do not operate the chain saw in a tree. Operation of a

chain saw while up in a tree may result in personal injury.

• Always keep proper footing and operate the chain

saw only when standing on a xed, secured and level

surface. Slippery or unstable surfaces such as ladders

may cause a loss of balance or control of the chain saw.

• When cutting a limb that is under tension, be cautious

of spring back. When the tension in the wood bers is

released, the spring-loaded limb may strike the operator

and/or throw the chain saw out of control.

• Use extreme caution when cutting brush and saplings.

The slender material may catch the saw chain and be

whipped toward you or pull you o balance.

• Carry the chain saw by the front handle with the

chain saw switched o and away from your body.

When transporting or storing the chain saw, always

t the guide bar cover. Proper handling of the chain saw

will reduce the likelihood of accidental contact with the

moving saw chain.

• Follow instructions for lubricating, chain tensioning

and changing accessories. An improperly tensioned or

poorly lubricated chain may either break or increase the

chance for kickback.

• Keep handles dry, clean and free from oil and grease.

Greasy, oily handles are slippery and can cause loss

of control.

• Cut wood only. Do not use the chain saw for any other

purpose. For example, do not use the chain saw to

cut plastic, masonry or non-wood building materials.

Using the chain saw in these incorrect ways could result in

serious damage to you and your tool.

Causes and operator prevention of

kickback

Kickback may occur when the nose or tip of the guide bar

touches an object, or when the wood closes in and pinches

the saw chain in the cut.

Tip contact in some cases may cause a sudden reverse

reaction, kicking the guide bar up and back towards the

operator.

Pinching the saw chain along the top of the guide bar may

push the guide bar rapidly back towards the operator.

Either of these reactions may cause you to lose control of the

saw which could result in serious personal injury. Do not rely

exclusively upon the safety devices built into your saw. As a

chain saw user, you should take several steps to keep your

cutting jobs free from accident or injury.

Kickback is the result of tool misuse and/or incorrect operating

procedures or conditions and can be avoided by taking proper

precautions as given below:

• Maintain a rm grip (right hand on the rear handle and

left hand on the front handle with thumbs and ngers

encircling the respective handles) and position your

body and arms to allow you to resist kickback forces.

Kickback forces can be controlled by the operator if

proper precautions are taken. Do not let go of the

chain saw.

• Do not overreach and do not cut above shoulder

height. This helps prevent unintended tip contact and

enables better control of the unit in unexpected situations.

• Only use replacement bars and chains specied by the

manufacturer. Incorrect replacement of bars and chains

may cause chain breakage and/or kickback.

• Never use a dull or loose chain. Keep the chain sharp and

properly tensioned.

• Follow the manufacturer’s sharpening and

maintenance instructions for the saw chain. Decreasing

the depth gauge height can lead to increased kickback.

Battery & Charger

Safety Instructions

NOTE: The battery and the charger are not included and must

be purchased separately. 24V-X2-CS16-CT is compatible

with the following batteries (models 24VBAT-LTE, 24VBAT-LT,

24VBAT, and 24VBAT-XR) and chargers (models

24VCHRG-QC, 24VCHRG-DPC). See page 22 for more

information.

We pay a great deal of attention to the design of every battery

pack to ensure that we supply you with batteries that are safe,

durable and have a high energy density. The battery cells have

a wide range of safety devices. Each individual cell is initially

formatted and its electrical characteristic curves are recorded.

This data is then used exclusively to be able to assemble the

best possible battery packs.

Despite all the safety precautions, caution must always be

exercised when handling batteries. The following points must

be obeyed at all times to ensure safe use. Safe use can only

be guaranteed if undamaged cells are used. Incorrect handling

of the battery pack can cause cell damage.

IMPORTANT! Analyses conrm that incorrect use and poor

care of high-performance batteries are the main factors

responsible for personal and/or product damage.

Product specificaties

Merk:	Sun Joe
Categorie:	Zaagmachine
Model:	24V-X2-CS16-CT

Heb je hulp nodig?

Als je hulp nodig hebt met Sun Joe 24V-X2-CS16-CT stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Zaagmachine Sun Joe

Sun Joe 20VIONLTE-CS10-RM Handleiding

15 November 2024

Sun Joe SWJ802E-PRP Handleiding

15 November 2024

Sun Joe iON8PS2 Handleiding

26 Juli 2023

Sun Joe 24V-HCSWP-CT Handleiding

2 Juli 2023

Sun Joe 24V-CSSHRP-LTE-RM Handleiding

20 Juni 2023

Sun Joe SWJ803E Handleiding

17 Juni 2023

Sun Joe SWJ599E Handleiding

4 Juni 2023

Sun Joe SWJ699E-RED-RM Handleiding

10 Mei 2023

Sun Joe 24V-PS10-CT Handleiding

7 Mei 2023

Sun Joe SWJ699E-RM Handleiding

5 Mei 2023

Handleiding Zaagmachine

Nieuwste handleidingen voor Zaagmachine

Shindaiwa 269TS Handleiding

19 November 2024

Shindaiwa 320TS Handleiding

19 November 2024

Shindaiwa 488 Handleiding

19 November 2024

Shindaiwa 352s Handleiding

19 November 2024

Ergotools Pattfield E-PST 800 L Handleiding

19 November 2024

Bavaria By Einhell Bavaria BFS 600 E Handleiding

19 November 2024

Bavaria By Einhell Bavaria BSTL 800 Profi Handleiding

19 November 2024

Proviel STL 800 Handleiding

19 November 2024

Proviel PVBK 40 Handleiding

19 November 2024

Proviel PVKS 38/40 B Handleiding

19 November 2024