Sun Joe 24V-PS10-LTE-RM Handleiding

Sun Joe Zaagmachine 24V-PS10-LTE-RM

Lees hieronder de 📖 handleiding in het Nederlandse voor Sun Joe 24V-PS10-LTE-RM (24 pagina's) in de categorie Zaagmachine. Deze handleiding was nuttig voor 57 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/24
© 2021 by Snow Joe®, LLC
All rights reserved. Original instructions. SAVE THESE INSTRUCTIONS
A Division of Snow Joe®, LLC Model 24V-PS10-LTE-RM Form No. SJ-24V-PS10-LTE-RM-880E-MR1-V2
R
OPERATOR’S MANUAL
CORDLESS POLE CHAIN SAW
24-VOLT MAX* | 2.0 Ah | 10-INCH
© 2021 by Snow Joe
®, LLC
All rights reserved. Original instructions. SAVE THESE INSTRUCTIONS
A Division of Snow Joe
®, LLC Model 24V-PS10-LTE-RM Form No. SJ-24V-PS10-LTE-RM-880E-MR1-V2
R
OPERATOR’S MANUAL
CORDLESS POLE CHAIN SAW
24-VOLT MAX* | 2.0 Ah | 10-INCH
1
IMPORTANT!
Safety Instructions
All Operators Must Read These
Instructions Before Use
Always follow these safety guidelines. Failure to do so may
result in serious bodily injury or death.
General Safety
mWARNING! This appliance is not intended for use
by children or by unassisted, unsupervised persons whose
physical, sensory or mental capabilities prevent them from
using it safely. Children should be supervised to ensure that
they do not play with the appliance.
Before starting up your machine, please check it carefully for
any defects. If you nd any, do not start up your machine.
Contact your authorized Snow Joe® + Sun Joe® dealer or
call the Snow Joe® + Sun Joe® customer service center at
1-866-SNOWJOE (1-866-766-9563).
mWARNING! When using the power tool, basic safety
precautions should always be followed to reduce the risk of
re, electric shock, and personal injury. These include:
1. Keep guards in place – Protective guards should be
checked periodically to ensure they are properly tted and
in correct working order.
2. Keep work area clean and well-lit – Clear work area of
branches and limbs after each cutting session. Cluttered
areas invite accidents.
3. Do not use in dangerous environments – Do not use
power tools in damp or wet locations.
4. Do not use the pole chain saw in the rain – Do not use
the pole saw in bad weather conditions, especially when
there is a risk of lightning. This decreases the risk of being
struck by lightning.
5. Keep bystanders and children away – All bystanders,
including children and pets, should be kept a safe
distance away from the work area.
6. Do not force the tool – It will do the job eectively and
safely if it is used at the rate for which it was designed.
7. Use the right tool – Do not force the tool or any
attachment on the tool to do a job for which they were
not designed.
8. Wear proper apparel – Do not wear loose articles of
clothing or jewelry since such items may get caught
in moving parts. Use of heavy-duty rubber gloves,
substantial non-skid footwear and close-tting clothing is
recommended when working outdoors with power tools.
9. Always use head protection when operating the pole chain
saw overhead. Falling debris can result in serious personal
injury.
10. Always wear safety glasses and ear defenders to
provide eye and ear protection – Everyday eyeglasses
only have impact resistant lenses and do not provide the
same protection as safety glasses.
11. Wear face or dust masks – If the cutting operation is
dusty, the use of a face or dust mask specially designed
to lter out microscopic particles is recommended.
12. Do not overreach – Keep proper footing and balance
at all times.
13. Maintain tools with care – Keep tools sharp and clean
for best and safest performance. Follow instructions for
lubricating and changing accessories.
14. Disconnect tool – Turn o the power switch and remove
the battery when it is not in use, before servicing, when
transporting or when changing the chain or
other accessories.
15. Reduce the risk of unintentional starting – Make sure
the safety lock button and the On/O switch are in the
OFF position before inserting the battery in the unit. Do
not carry the pole chain saw with the safety lock button
and the On/O switch engaged.
16. Use recommended accessories – Consult the owner’s
manual for recommended accessories. The use of
improper accessories may cause risk of injury.
17. Check for damaged parts – Before each use, repair or
replace any guard or part that is damaged. In addition,
check for alignment of moving parts, binding of moving
parts, breakage of parts and any other conditions that
may aect the tool's operation.
18. Never leave tool unattended while it is running – Turn
the power OFF and remove the battery from the unit.
Do not leave the saw until the cutting bar comes to a
complete stop.
19. Do not grasp the exposed cutting blade or cutting
edges when picking up or holding the saw – Be sure
to encase the cutting bar in its protective sheath when
not in use.
20. Stay alert – Watch what you are doing. Use common
sense. Do not operate the pole chain saw when you
are tired.
2
21. Store idle tool indoors – When not in use, appliances
should be stored indoors in a dry and high or locked-up
place out of the reach of children.
mWARNING! Before inspecting, cleaning, or servicing
the machine, remove the battery and wait for all moving parts
to stop. Failure to follow these instructions can result in serious
personal injury or property damage.
mWARNING! Do not use this appliance without reading
this instruction manual.
mWARNING! Do not use the appliance within range of
persons unless they are wearing protective clothing.
mWARNING! Do not operate the cordless power tool in
a tree, on a ladder, or on a scaold. Using the tool under such
circumstances is extremely dangerous.
mWARNING! Do not let familiarity with this type of tool
prevent you from taking all necessary precautions. Remember
that a careless fraction of a second is sucient to inict
serious injury.
mWARNING! The cordless pole chain saw must be fully
assembled before operation! Do not use the tool that is only
partly assembled or assembled with damaged parts!
mWARNING! Starting, stopping, and restarting an electric
motor repeatedly within a few seconds can generate a great
deal of heat and damage the motor. To protect the life of your
cordless power tool, always wait at least ve seconds after
stopping before restarting the unit.
mWARNING! Electrical Shock Hazard – Before starting
up your machine, please check it carefully for any defects. If
you nd any, do not start up your machine and contact your
distributor.
NOTE: Take care of small parts that are removed during
assembly or when making adjustments. Keep them secure to
avoid loss.
Please contact an authorized Snow Joe® + Sun Joe® dealer
or call the Snow Joe® + Sun Joe® customer service center
at 1-866-SNOWJOE (1-866-766-9563) for all maintenance
or operations not foreseen in this manual. Any operation
performed in an unauthorized service center or by unqualied
personnel will completely invalidate the warranty.
mWARNING! For your safety and that of others:
• Correct maintenance is essential to maintain the original
eciency and safety of the machine over time.
• Keep all nuts, bolts, and screws tight to be sure the
equipment is in safe working condition.
• Never use the machine with worn or damaged parts.
Damaged parts are to be replaced and never repaired.
mWARNING! Always wear protective gloves during
maintenance operations.
mWARNING! Use only original manufacturer’s
replacement parts, accessories and attachments. Failure to do
so can cause possible injury and poor performance.
To order genuine replacement parts or accessories for the
Sun Joe® iON+ cordless pole chain saw, please visit
sunjoe.com or contact the Snow Joe® + Sun Joe® customer
service center at 1-866-SNOWJOE (1-866-766-9563).
Specic Safety Warnings
for Pole Chain Saw
mWARNING! Do not operate near SHOCK HAZARD!
electrical power lines. The unit has not been designed to
provide protection from electric shock in the event of contact
with overhead electric lines. Consult local regulations for safe
distances from overhead electric power lines and ensure that
the operating position is safe and secure before operating the
pole chain saw.
mWARNING! Read all safety warnings and all
instructions. Failure to follow the warnings and instructions
may result in electric shock, re and/or serious injury.
1. Only the pole chain saw operator should be in the
work area.
2. Do not use the pole chain saw to cut down trees.
3. Always use two hands when operating the pole chain saw.
Grip the pole chain saw securely with one hand on the
trigger and the other hand on the pole.
4. Before starting the pole chain saw, make sure that the saw
chain is not in contact with any object.
5. Do not allow the pole chain saw to make contact with
grounded objects such as pipes, fences, and metal posts
6. Keep all parts of the body away from the cutting blades or
chain. Do not remove cut material or hold material to be cut
when blades are moving. Make sure the switch is o when
clearing jammed material. The blades or chain will continue
moving for a while after the tool is turned o. A moment
of inattention while operating the power tool may result in
serious personal injury.
7. Do not force the pole chain saw while cutting. Apply light
pressure. It will perform more eectively and safely if it is
used at the rate for which it was designed.
8. Use extreme caution when cutting a limb that is under
tension. When wood tension is released, the limb could
spring back and strike the operator, causing severe injury
or death.
9. During transport, hold the pole at its balance point, with
the guide bar and chain facing to the rear.
10. Do not cut small brush and saplings with the pole chain
saw. Small branches may catch in the chain and be
whipped towards the operator, which could pull the
operator o balance.

Product specificaties

Merk: Sun Joe
Categorie: Zaagmachine
Model: 24V-PS10-LTE-RM

Heb je hulp nodig?

Als je hulp nodig hebt met Sun Joe 24V-PS10-LTE-RM stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Zaagmachine Sun Joe

Sun Joe

Sun Joe 20VIONLTE-CS10-RM Handleiding

15 November 2024
Sun Joe

Sun Joe SWJ802E-PRP Handleiding

15 November 2024
Sun Joe

Sun Joe iON8PS2 Handleiding

26 Juli 2023
Sun Joe

Sun Joe 24V-HCSWP-CT Handleiding

2 Juli 2023
Sun Joe

Sun Joe 24V-CSSHRP-LTE-RM Handleiding

20 Juni 2023
Sun Joe

Sun Joe SWJ803E Handleiding

17 Juni 2023
Sun Joe

Sun Joe SWJ599E Handleiding

4 Juni 2023
Sun Joe

Sun Joe SWJ699E-RED-RM Handleiding

10 Mei 2023
Sun Joe

Sun Joe 24V-PS10-CT Handleiding

7 Mei 2023
Sun Joe

Sun Joe SWJ699E-RM Handleiding

5 Mei 2023

Handleiding Zaagmachine

Nieuwste handleidingen voor Zaagmachine

Anova

Anova E60CS Handleiding

20 December 2024
Silverline

Silverline 447132 Handleiding

19 December 2024
Silverline

Silverline 427644 Handleiding

19 December 2024
Herkules

Herkules KS 210 Profi Handleiding

17 December 2024
Total

Total TS730301 Handleiding

16 December 2024
Total

Total TJSLI8501 Handleiding

16 December 2024
Turbo-Silent

Turbo-Silent EKS 2040/1 Handleiding

16 December 2024
Bavaria

Bavaria BJS 400 Handleiding

5 December 2024
Bavaria

Bavaria BCS 64/1 Handleiding

5 December 2024
Bavaria

Bavaria BEC 2040 TC Handleiding

5 December 2024